Shop by Car

Filters

Showing 25–36 of 571 results

Departments

Price Filter

25-36 of 571 products

  • £1,249.99 inc VAT

    H&R Deep Coilover Kit for VW Polo 5 6R / 6C1 ( 90mm )

    , , , , ,
    H&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. Lowered front axle from [mm]: 60 • Lowering front axle up to [mm]: 80 Lowered rear axle from [mm]: 60 • Lowered rear axle up to [mm]: 90 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,249.99 inc VAT
    £1,249.99 inc VAT
  • £1,761.99 inc VAT
    £1,761.99 inc VAT
  • £1,663.99 inc VAT
    £1,663.99 inc VAT
  • £1,885.00 inc VAT

    H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm Fixed damping:

    , , , , ,
    H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm fixed damping Fits RS6 C6 4F C7 4G
    £1,885.00 inc VAT
    £1,885.00 inc VAT
  • £1,450.49 inc VAT
    £1,450.49 inc VAT
  • Audi TT 8J widened fenders 3cm per side
    £449.00 inc VAT

    Muecke Audi TT 8J widened wings 3cm

    ,
    • 1 set of fiberglass Audi TT 8 J wing GFK 3 cm wider per side
    • unpainted, surface gelcoat gray
    • Material report is included, acceptance according to §21 StVZO (individual acceptance)
    Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
    £449.00 inc VAT
    £449.00 inc VAT
  • £2,029.00£2,939.99 inc VAT

    H&R Deep Coilover Kit for Audi S3 8Y / RS3 Limo 8YA

    H&R Deep Coilover Kit for : H&R Deep Coilover Kit for Audi A3 / S3 8Y / RS3 8YA Limo 2019> Lowering 40-80mm EDC cancellation kit 93068-1 These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.
    If you are unsure which coilover best suits your needs please contact us [email protected]
    Note: The picture may differ from the delivered product
    The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,029.00£2,939.99 inc VAT
    £2,029.00£2,939.99 inc VAT
  • £1,790.00£2,290.00 inc VAT

    Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm

    , , , ,
    Audi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover

    Fits the following models:

    • Aud S1 8X 2014>

    Gepfeffert V2 with / without adjustable camber adjustable top mounts

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver.   Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,790.00£2,290.00 inc VAT
    £1,790.00£2,290.00 inc VAT
  • £1,959.99 inc VAT

    H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm

    , , , , ,

    H&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>

    RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model  please check RSS-13-471-5/1SC For any queries please contact [email protected]
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • £1,959.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm

    , , , , ,
    Audi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.
    This is a custom made “Deep” version coilover kit made to order.
    It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mm
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • Sale
    £602.65 inc VAT

    MTS Technik Street Coilover Kit Cupra Formentor

    ,

    Coilover Kit Cupra Formentor

    Coilover Kit MTS Technik for Cupra Formentor, lowering the front axle between 40 - 60 mm, and rear between 40 - 65 mm. Dedicated for the years of: 07/20 -, for the engine version: 2.0TSI 4Drive / 2.5 VZ5 4Drive / 2.0TDI 4Drive.   mm. Dedicated for the years of: 07/20 -, for the engine version: 2.0TSI 4Drive / 2.5 VZ5 4Drive / 2.0TDI 4Drive.
    2 years warranty 2 year warranty with no mileage limit to confirm high quality.
    High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
    Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
    Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
    Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
    hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
    Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
    Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
    3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
    21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
    24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
    35 - Rear thread adjustment block is mounted on the top.
    39 -Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
    52 - Only suitable for multilink suspension.
    £602.65 inc VAT
    £602.65 inc VAT
  • £70.00 inc VAT

    MTS Technik Performance Damper for Transporter T5 T6 T6.1

    , , ,
    Performance Shock Absorber (rear) Volkswagen Transporter T5 T6 T6.1 Volkswagen Transporter T5 / T6 / T6.1 Engine 2.0 / 2.0TSI / 2.0TSI 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion Year 2003 - 01/15 > 2023 2 years warranty 2 year warranty with no mileage limit to confirm high quality. High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials. Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance. Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Measurement from centre of bushing : 440mm fully open , 300mm closed.
    £70.00 inc VAT
    £70.00 inc VAT