-
-
-
-
-
-
-
-
Still Static Camber Castor Top Mounts Mk1-Mk3 Golf
Shop by Product Type, Suspension, Scirocco / Corrado / Eos, Golf Mk1 / Mk2 / Mk3, Coilover Suspension Accessories, Air Suspension Accessories, Coilover Suspension Parts, Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover Suspension£290.00 – £320.00 inc VATWhat Do I Get?
All Still Static top mounts are constructed from high-grade 7075 aluminium. Anodised black finishes are the most popular option although a huge selection of colours are available to order, making for great personalisation. A key feature of the Still Static top mounts is the spherical, high-impact, PTFE-lined bearing that’s present on each mount. Not only is this exceptionally hard wearing, but it’s also replaceable. So, if on the extremely rare occasion the bearing is damaged from a heavy impact, you don’t need to replace the entire top mount.Are They Available for My Car?
At present, Still Static Top Mounts are available for the Mk1, Mk2 and Mk3 VW platforms: Mk1 Top Mounts – Both camber (up to 2.5° negative) and caster (1.5° positive to 1.5° negative) are individually adjustable Mk2 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly Mk3 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly£290.00 – £320.00 inc VAT -
SRS-Tec Wide Wings GT, VW Golf V 2.5cm Wider
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide front fenders GT (left & right) Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK5) Model Year: 08/2003 – 05/2009 Submodell: AllDetails
Notice The fenders are 2,5cm wider and have the original look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount up to 235/30/20 Tyres on 9×20 ET46 wheels. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required. Trimming of the original arch liner is required to fit to the original arch line to the new wing.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
Stillstatic Windscreen sticker
Shop by Product Type, Stillstatic MerchandiseStillstatic lovers identifying mark, available as front, side or rear separately or as a set. Front (520mm x 150mm) Rear sticker (280mm x75mm) Side window stickers (100mm x 25mm) Pictured: Silver and Satin black£4.00 – £22.50 inc VAT£4.00 – £22.50 inc VAT -
SRS Roof Spoiler Addon GT, VW Golf V
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT Area of use Make: Volkswagen Modell: Golf Type: 1K (MK5) Model Year: 08/2003 – 05/2009 Submodell: 2-Door / 4-Door (not for Station Wagon) Engine: AllDetails
Notice Only for the VW Golf 5 GTI / GTD / ED30 / R32 Roof Spoiler Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW MK5 Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS-Tec Wide Front Wing GT, VW Golf 4 with indicator hole.
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-TecSRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2006 Submodell: All£499.99 inc VATDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fendersIncluded
SRS-Tec front Fender GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£499.99 inc VAT -
Leader Line 1/4″ – 1/8″
HP Drivetech Air Suspension SparesHP Drivetech Suspension Leader lines used on all front strut applications. Priced individually.£29.99 inc VAT£29.99 inc VAT -
SRS-Tec Wider Wings GT, VW Golf VI 2.5cm
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: All (except Station Wagon)Details
Notice 2,5cm wider then the stock fenders. OEM Design. Mounted without any modification on the front bumper. With the fender it is possible to mount up to 235/30/20 Tyres on 9×20 ET46 wheels. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required. Trimming of the original arch liner is required to fit to the original arch liner to the new wing.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
Muecke VW MK7 Golf 7 widened wings 3cm
Golf Mk7 / Mk7.5 / Mk8, Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right 3cm per side widened wings made of fiberglass, suitable for the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
2.5cm SRS-Tec Wide Front Wings GT, Seat Leon 5F
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Area of use Make: Seat Modell: Leon III Type: 5F Model Year: from 2012 – 2020 Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wider front fenders GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, VW Golf VII
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Golf Type: AU (MK7) Model Year: from 08/2012 – 02/2017 Submodell: All, before facelift Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Fit only on Mk7 before facelift Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
Sold out
StillStatic #GotTheDrop Air Freshener
Shop by Product Type, Stillstatic MerchandiseHave you #GotTheDrop on Air or Coils by StillStatic ? UK made fresh fragrances! represent and let the world know !£1.95 inc VAT£1.95 inc VAT -
SRS-Tec Rear Inner Arch Liners, Wheel arch liners, Land Rover Defender 110
SRS-TecSRS-Tec Rear Inner Arch Liners, Wheel arch liners, Land Rover Defender 110 ( not suitable for 90 ) These are special order parts which are made to order - Terms and Conditions of sale apply. Estimated delivery 5-6 weeks from order Article Wheel liners rear axle Area of use Vehicle manufacturer: Land Rover Vehicle model: Defender Model year: 1990 – 2016 Version: 110 (not suitable for 90)£329.00 inc VATproduct details
Note: Inner wheel house liners for the rear axle on the Defender 110. Prevents dirt from getting into the wheel house. Not suitable for the Defender 90. Material High-quality, glass fiber reinforced composite material Product protection Our products and our design are protected by patent law worldwide!assembly
Screwing to original mounting points, where mounting points are not there it is necessary to add these. ( most in general do have these but if unsure please check before ordering )scope of delivery
– SRS-Tec wheel house liners rear axle left / right (unpainted) – Installation instructions£329.00 inc VAT -
GotTheDrop Sticker
Shop by Product Type, Stillstatic MerchandiseHave you #GotTheDrop on Air or Coils by StillStatic ? Then represent and let the world know ! Size 12cm x 9cm sticker perfect for front or rear window corner. Pictured: Oil Slick and Satin black£3.50 inc VAT£3.50 inc VAT -
Mk1 Golf G60 280mm Front Brake Carrier – Plug and Play ( 75mm between bolts )
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake KitsG60 280mm Brake caliper carrier set for Golf 1, Plug & Play complete set of brake caliper holders for G60 brakes, front axle, suitable for VW Golf 1 models, for installing a 280 mm brake disc. These carriers have been specifically produced to allow fitment of the 280 G60 lucas caliper without need for an adapter. Full brake 280mm G60 kits with either plain discs or grooved discs. for brake disc diameter [mm]:280mm Required quantity:1 Brake type:Disc brake Installation side:Front axle Manufacturer approval:Special parts multi-part:two parts Unit of measure:Sentence "In Stock" expected delivery 10-14 working days from order.£195.00 – £450.00 inc VAT£195.00 – £450.00 inc VAT -
Wheel hub conversion kit – Front or Rear VW T5 T6 T6.1 Bus to 5×112 PCD
Shop by Product Type, Special Parts, HubsWheel hub conversion kit, VA or RA, VW T5, T6 Bus from to 5x112 (2 wheel hubs) Wheel hub conversion kit to a bolt circle of 5 x 112, suitable for the front or rear axle of the VW T5 and T6 series. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112 Scope of delivery: 2x wheel hub The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter [mm]:85mm Required quantity:1 Installation side:Front axle, rear axle Rim hole number:5 -hole Flange Ø [mm]:149mm Manufacturer approval:Special parts Hole circle Ø [mm]:112mm multi-part:two parts Unit of measure:Sentence Admission type:subject to registration Or choose our hub kit with discs and pads for a complete set up. Full Hub and Disc kit includes : Brake conversion kit, VA + HA, VW T5 + T6 Bus, bolt circle: 5 x 112, brake: VA Ø 308 mm, HA Ø 294 mm Change from 5 x 120 to 5x112 PCD and keep your original brakes! Front axle Ø 308 mm, rear axle Ø 294 mm 2x brake disc, front axle 4x brake pads, front axle 2x wheel bearings including mounting material, front axle 2x brake hose, front axle 2x brake disc, rear axle 4x brake pads including warning contact, rear axle 2x wheel bearings including mounting material, rear axle 4x brake hose, rear axle The use of this brake conversion kit on public roads generally requires an individual inspection in accordance with Section 21 of the StVZO by an officially recognized expert. For individual acceptance, we therefore provide the required material certificate in the scope of delivery. Installation side: front axle, rear axle Brake disc type: ventilated braking system: LUCAS, ATE, Lucas / TRW Surface: coated Wear warning contact: including wear warning contact Type of approval: registration required Rim Hole Number: 5-hole Bolt circle diameter [mm]: 112 mm Number of wear indicators [per axle]: 1 per axle Outer diameter [mm]: 308 mm, 294 mm, 85 mm Width 1 [mm]: 155 mm Width 2 [mm]: 156.2 mm Width [mm]: 116.1 mm Brake disc thickness [mm]: 29.5 mm, 22 mm Thickness/Strength 1 [mm]: 18.1 mm Thickness/Strength 2 [mm]: 17.6 mm Thickness [mm]: 17.4 mm Rim size [inch]: 16 inches Flange Ø [mm]: 149 mm Thread size 2: M10x1 Height 1 [mm]: 73.3 mm Height 2 [mm]: 74.8 mm Height [mm]: 59 mm Internal thread [mm]: M10x1 mm Length [mm]: 275 mm, 550 mm, 194 mm Wrench size: 14/15.5, 17/15 Warning contact length [mm]: 195 mm, 170 mm multi-part: multi-part required quantity: 1 Manufacturer approval: Special Parts External thread [mm]: M10x1 mm Note : " in stock " the item will be shipped in 7-10 working days from order.£145.00 – £600.00 inc VAT£145.00 – £600.00 inc VAT -
SRS-Tec 2.5cm Wide Wings GT, VW Golf VII (Facelift 7.5)
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Golf Type: AU (MK7.5) Model Year: from 02/2017 – 12/2019 Submodell: All, facelift Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Fit only on Mk7.5 facelift Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec Wide Wings GT, Seat Leon 1P
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of use Make: Seat Modell: Leon Type: 1P Model Year: 09/2005 – 09/2012 Engine: AllDetails
Notice 3cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS Rear Diffuser Cup, VW Polo 9N3
Shop by Car, Polo, SRS-Tec£199.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser Cup Area of Use Vehicle manufacturer: VW Modell: Polo IV Type: 9N3 Model Year: 03/2005 – 05/2009 Submodell: all< Notice Nur passend für die Original VW Polo 9N3 Cup Heckstoßstange.Details
Notice Only for the original VW Polo 9N3 Cup rear bumper. Expert’s report German TÜV report StVZO § 19.2, no Registration required Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the OEM rear bumper. No Modifications requiredIncluded
SRS-Tec rear diffuser Cup (unpainted) – TÜV report – Mounting material – Assembly Instructions£199.99 inc VAT -
Sold out
Stillstatic Windscreen Sunstrip Matt Black
Shop by Product Type, Stillstatic MerchandiseStillstatic windscreen sunstrip banners. The set includes one front windscreen sunstrip , to fit all windscreens. Cutting to size required on the car. Pictured: Satin black Colours Black (satin) Grey (satin) Silver (satin) Etched Look (inside) Gold (satin) White (satin)£25.00 inc VAT£25.00 inc VAT -
Muecke VW Polo 6R / 6C widened wing 2.4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set VW Polo 6R / 6C wing GFK 2.4 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi S3 8L widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )When lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£519.99 inc VAT- 1 set left & right widened fenders made of GRP 3cm per side matching the original bumper
- Bumper is bolted directly to the fender
- unpainted, surface gelcoat gray
- A material report will be delivered
- Individual acceptance §21 STVZO required
£519.99 inc VAT -
SRS-Tec Wide Wings GT, AUDI A3 Sportback 8PA Facelift
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Area of use Make: AUDI Modell: A3 Type: 8P / 8PA Facelift Model Year: 07/2008 – 10/2012 Submodell: 3-door, 5-door, Sportback Engine: AllDetails
Notice 3cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Fit also at the S3 8P Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wider front fenders GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS-Tec Wide Wings GT, VW Polo 9N3
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Polo IV Type: 9N3 Model Year: 05/2005 – 05/2009 Submodell: All Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS Front Bumper Cover Set GT, VW Golf VII
SRS-Tec£175.00 inc VATDescription
Manufacturer SRS-Tec Article Front bumper cover set GT Version for VW Golf 7 GTI / GTD Front bumper Area of Use Vehicle manufacturer: VW Model: Golf Type: AU (MK7) Model Year: from 08/2012 – 02/2017 Submodell: AllDetails
Notice Fit only to the VW Golf 7 GTI / GTD Front bumper Expert’s report TÜV report according to German §19.3 StVZO Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the Front bumper. No modifications to the Front bumper required. Comes ready to prep, prime and paint.Included
SRS-Tec Front bumper cover set GT (unpainted) – Fitting instructions – Mounting material£175.00 inc VAT -
Muecke VW MK 7.5 Golf FACELIFT widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened fiberglass wings 3cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Audi A3 + S3 8V widened wing 3cm widened per side ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set fiberglass wing Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
H&R Electronic Damping Delete Kit
Shop by Product Type, Suspension, Shop by Car, Audi, BMW, Seat, Skoda, Volkswagen, Ford, Honda, Mercedes, Porsche, Vauxhall, A3 / S3 / RS3, A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A8 / S8 / RS8, TT / TTS/ TTRS, Polo, Golf, Passat, Transporter, R8, Scirocco / Corrado / Eos, 3 Series, 5 Series, 1 Series, Mini, Mini, M Series, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Lamborghini, 6 Series, T Roc, Tiguan, Touran, Passat CC, Octavia, Superb, Ibitha, Leon, 4 Series, 2 Series, Ateca, Kodiak, X Series, Suspension Electronics Delete Kits£318.99 – £458.99 inc VAT£318.99 – £458.99 inc VAT -
Sold out
B5 RS4 Twin Rear caliper adapters for fitting Porsche 4 pot caliper and R8 handbrake caliper with Allroad 4F 330mm disc ( not inc ).
Shop by Product Type, Suspension, Shop by Car, Brake AdaptionThe kit includes steel brackets for main brake caliper and handbrake caliper, fitting bolts, handbrake caliper relocation adapter for brake line, new brake lines. You will need Porsche 4 pot calipers and R8 handbrake calipers and Audi Allroad 4F 330mm discs as these are not included. Actual product will vary from displayed image. These are special request items please contact to order at [email protected]£620.00 inc VAT£620.00 inc VAT -
H&R Deep Coilover Kit for VW MK7/7.5 Golf Gtd Gti ClubSport GTE TCR Golf R ( With or Without camber adjustment )
Suspension, H&R Coilover Suspension, Golf 7 / 7.5 / Mk8 H&R Deep Coilover Suspension£1,449.99 – £1,599.00 inc VATH&R Deep Coilover Kit for : Golf Mk7 + 7.5 facelift models , Chassis Type AU MQB 11/12> inc. GTD, Gti, Clubsport, TCR, R For electronic damping models use delete kit p/n 93068-1 These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,449.99 – £1,599.00 inc VAT -
Muecke VW MK5 Golf 5 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Golf 5 wing GFK 3 cm widened per side (one set left & right)
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Seat Ibiza 6j widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Seat Ibiza facelift and prefacelift widened wing 2.5 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Stillstatic Define T Shirt – Black
Shop by Product Type, Stillstatic MerchandiseHigh quality cotton T shirt in Black with white screen print logo£24.95 inc VAT£24.95 inc VAT -
Sold out
Master brake cylinder with reservoir Ø 22.2 mm, VW, VAG, without ABS, suitable for conversion
Brake conversion parts£99.00 inc VATMaster brake cylinder with reservoir Ø 22.2 mm, VW, VAG, without ABS, suitable for conversion
This master brake cylinder including brake fluid reservoir from Special Parts is perfect for the conversion Ø 22.2 mm, VW, VAG, without ABS.Braking system:ATEMaterial:plasticSupplementary article/Supplementary information 2:without lidNumber of connections:4Diameter [mm]:22.2 mmLeft/right hand drive:for left-hand drivemulti-part:two-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special PartsComparison numbers- VAG 1H1 611 019 B
- VAG 1H1 611 019B
- VAG 1H1 611 301 A
- VAG 192 611 019 B
- VAG 192 611 019B
- VAG 357 611 019 A
- VAG 357 611 019 B
- VAG 357 611 301 A
£99.00 inc VAT -
VW Golf 2, Polo 6N Corrado, Brake caliper conversion kit, VA ( Front ), G60 brake, incl. brake caliper holder + brake pads
Shop by Product Type, Special Parts, Brake KitsBrake caliper conversion kit, VA, VW Golf, Corrado, G60 brake, incl. brake caliper holder + brake pads The perfect repair solution for converting the front axle of the VW Golf, Corrado G60. Individual parts also available. The scope of delivery includes 2 brake calipers and brake caliper holders including mounting accessories as well as the matching brake pads (4 pieces). Supplementary article/additional information:with Holder Supplementary article/Supplementary information 2:with brake pads Required quantity:1 Brake caliper version:Fist saddle Braking system:Lucas / TRW Diameter [mm]:54mm Installation side:Front axle Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence£160.00 – £665.00 inc VAT£160.00 – £665.00 inc VAT -
VW Golf 2/3, Corrado front brake conversion kit, G60 Girling double piston caliper 280 mm, 4 x 100
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake Kits£650.00 inc VATBrake conversion kit, front axle, G60 brake, double piston, VW Golf 2/3, Corrado, 280 mm, Girling, 4 x 100
The perfect repair solution for the front axle of the VW Golf 2/3, Corrado, brake system: Girling, G-60 brake with double piston (280 mm, 4 x 100): Complete brake set including calipers, brackets, discs, pads. Scope of delivery: 2x brake disc 4x brake pad including accessories 2x brake caliper 2x brake caliper holderInstallation side:front axleBrake caliper design:brake caliper (2-piston)Brake disc type:ventilatedMaterial:cast ironQuality:cross-cutWear warning contact:including wear warning contactNumber of holes:4Bolt circle diameter [mm]:100 mmCentering diameter [mm]:60 mmSupplementary Article/Supplementary Info 2:with anti-squeak plateOuter diameter [mm]:280 mmBore diameter [mm]:14.5 mmWidth [mm]:145.0 mmBrake disc thickness [mm]:25 mmThickness [mm]:19.5 mmHeight [mm]:42 mm, 71.0 mmInner diameter 1 [mm]:139 mmMinimum thickness [mm]:22 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special PartsPiston diameter 1 [mm]:40 mmPiston diameter 2 [mm]:45 mm£650.00 inc VAT -
Sold out
HPDT Transporter T5/6/6.1 Replacement Rear Airbag
HP Drivetech Air Suspension Spares£360.00 inc VAT£360.00 inc VAT -
Polo 6R/6C / Audi A1 8X Coilover Suspension Gepfeffert KW V2 Suspension 40-80mm
Shop by Car, Polo, KW Gepfeffert Coilover SuspensionVW Polo 5 (6R/6C) 2008-2017 Gepfeffert V2 Coilover£1,780.00 – £2,200.00 inc VATFits the following models:
- VW Polo 6R/6C
- Audi A1
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,780.00 – £2,200.00 inc VAT -
SRS-Tec 2cm Wider Wings GT, VW Polo 6C
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Polo V Type: 6C Model Year: 04/2014 – Submodell: All Engine: AllDetails
Notice 2cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, VW Lupo GTI
SRS-Tec£509.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Lupo Type: 119 Model Year: 2000 – 2003 Submodell: GTIDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£509.99 inc VAT -
SRS-Tec Wide Front Wing GT, VW Bora
SRS-Tec£489.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: AllDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fenders – SRS-Tec front Fender GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructionsIncluded
SRS-Tec front Fender GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions All SRS Products take approx 5-6 weeks to be delivered. There is no express option this is the only shipping method we can offer for these size parts.£489.99 inc VAT -
SRS-Tec Wide Wings GT, VW Up! ( with indicator hole )
SRS-Tec£499.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of use Make: Volkswagen Modell: up! Type: W120 Model Year: from 12/2011 Submodell: All Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£499.99 inc VAT -
SRS-Tec Rear Inner Arch Liners, Land Rover Defender 90
SRS-TecSRS-Tec Rear Inner Arch Liners, Wheel arch liners, Land Rover Defender 90 ( not suitable for 110 ) These are special order parts which are made to order - Terms and Conditions of sale apply. Estimated delivery 5-6 weeks from order£329.00 inc VATDescription
Manufacturer SRS-Tec Article Rear inner arch liners Area of use Make: Land Rover Modell: Defender Model Year: 1990 – 2016 Submodell: Version: 90 (not suitable for 110 and pickup)Details
Notice Rear inner arch liners for the Defender. Protect the inner arch from dirt. Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Screwing to original mounting points, where mounting points are not there it is necessary to add these. ( most in general do have these but if unsure please check before ordering )Included
SRS-Tec rear inner arch liners left / right (unpainted) – Installation instructions£329.00 inc VAT -
SRS Rear Diffuser GT, Audi TT 8J
SRS-Tec£229.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GT Version Exhaust cut-out on the driver’s side Area of use Make: AUDI Modell: TT Type: 8J Model Year: 04/2006 – 03/2014 Submodell: Roadster & Coupe Engine: AllDetails
Notice Only for the standart TT 8J rear bumper, not fit for RS, S-Line bumper Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM rear diffuser No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser GT (unpainted) – TÜV report – Fitting instructions£229.99 inc VAT -
SRS Rear Diffuser R20/R, VW Golf VI ( For R Bumper only )
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser R20/R Version cut-out for R20 exhaust Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the standart Golf 6 R20 rear bumper, not for GTI/GTD bumper Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the VW Golf VI R20 rear bumper. No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R20/R (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Roof Spoiler Addon GT, VW Polo 6R
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT Area of use Make: Volkswagen Modell: Polo V Type: 6R Model Year: 03/2009 – 03/2014 Submodell: All Engine: AllDetails
Notice Only for the VW Polo GTI Roof Spoiler Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Rear Diffuser R-Style R32, VW Golf IV Bora
SRS-Tec£146.00 inc VATManufacturer SRS-Tec Article Rear Diffuser R-Style Version R32 exhaust Area of Use Vehicle manufacturer: VW Model: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: AllNotice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the R32 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.£146.00 inc VAT -
StillStatic #GotTheDrop “The Script” T-Shirt
Shop by Product Type, Stillstatic Merchandise£24.95 inc VAT£24.95 inc VAT -
Stillstatic Define T Shirt – Black Red + White Print
Shop by Product Type, Clothing, Mens, Womens, Stillstatic MerchandiseHigh quality cotton T shirt in Black with Red + White screen print logo£24.95 inc VAT£24.95 inc VAT -
H&R Deep Coilover Kit for VW Polo 5 6R/6C1 Audi A1 8X 2WD Very Low 80-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > AUDI A1 (8X1, 8XK) | 05/2010-10/2018 Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. This version is -20mm shorter than GFW50015-1 which lowers 90mm max Lowered front axle from [mm]: 80 • Lowering front axle up to [mm]: 100 Lowered rear axle from [mm]: 80 • Lowered rear axle up to [mm]: 110 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,759.00 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,759.00 inc VAT -
H&R Deep Coilover Kit for VW Polo 5 6R / 6C1 / Audi A1 8X 2WD 60-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Volkswagen, Polo, A1 / S1, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > AUDI A1 (8X1, 8XK) | 05/2010-10/2018 Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. Lowered front axle from [mm]: 60 • Lowering front axle up to [mm]: 80 Lowered rear axle from [mm]: 60 • Lowered rear axle up to [mm]: 90 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,229.00 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,229.00 inc VAT -
Muecke VW MK6 Golf 6 widened wing 2.6cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set Golf 6 wings GFK 2.6 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Corrado G60 widened wing 3cm ( 1.5cm wider VR6 )
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set GFK VW Corado G 60 wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
VW Touran widened wing 2.4 cm ( 2010 facelift )
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened wing 2.4 cm per side without indicator
- from , 2010
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Audi A3 8P facelift widened wings 1.5 cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Audi A3 8P facelift wing GFK 1.5 cm wider
£519.99 inc VAT -
Sale
£15.00 inc VAT -
H&R Deep RSS Coilover Kit for Audi B8 Chassis ( All ) inc S and RS models SQ5 S4 RS4 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, H&R CoiloversThe Race Kits utilise Bilstein’s renowned monotube damper technology, the same technology used by BMW’s official DTM teams. The steel dampers benefit from a triple-galvanised coating as well as H&R’s own special protective layer to hold back corrosion. Combined with H&R’s race-spec modular springs these coilovers deliver maximum performance. All applications are height adjustable and some applications have an extra-cost option for 18 damper settings. Lowering Range for this coilover 50-120mm Kits available as fixed damping or with hardness adjustment. Please contact us [email protected] for further queries.£1,849.00 – £2,639.00 inc VAT£1,849.00 – £2,639.00 inc VAT -
Brake master cylinder conversion, diameter: 25.4 mm, VW Golf 1, 2, 3, Corrado, GTI, G60, VR6
Brake conversion parts£99.00 inc VATBrake master cylinder conversion, diameter: 25.4 mm, VW Golf 1, 2, 3, Corrado, GTI, G60, VR6
This master brake cylinder from Special Parts, with a diameter of 25.40 mm, is perfect for converting to a larger brake (e.g., from an Audi S3, Porsche, etc.) or for increasing the original brake pressure. For vehicles without ABS.Number of connections:4Diameter [mm]:25.4 mm, 25.4 mmThread size:M10x1Length 1 [mm]:31.5 mmLength 2 [mm]:120.8 mmmulti-part:ST, one-piecerequired quantity:1Manufacturer approval:Special PartsComparison Numbers- VAG 7D0 611 019 A
£99.00 inc VAT -
Brake conversion kit, HA Rear VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake Kits£590.00 inc VATBrake conversion kit, HA, VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100
Do you want to drive 5x100 rims but don't want to change your original brakes? Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the rear axle of the VW Golf 1/2/3, Polo 6N (compact bearing 256 mm) is the answer to drive rims with a bolt circle of 5x100. No adapter! No wheel spacers! Scope of delivery: 2x brake disc 4x brake pad 2x axle pin 2x brake calliper 2x brake calliper bracket 2x wheel hub 2x conversion sleeve and accessories The use of this brake conversion kit on public roads usually requires an individual inspection in accordance with § 21 StVZO by an officially recognized expert. For the individual inspection, we therefore provide the required material certificate in the scope of delivery and here under the "Documents" tab.Brake type:disc brakeBrake caliper design:brake caliper (1-piston)Brake disc type:ventilatedbraking system:LUCASManufacturer restriction:TRWQuality:cross-cutNumber of holes:5Bolt circle diameter [mm]:100 mmOuter diameter [mm]:120 mm, 256 mmWidth [mm]:62 mmBrake disc thickness [mm]:22 mmInner diameter [mm]:30 mmPiston diameter [mm]:38 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:256 mm£590.00 inc VAT -
Pre-assembled hub, 4 x 100, front left + right, VW Golf 1, Caddy, Scirocco for 16V / G60 brake
Shop by Product Type, Special Parts, Hubs£250.00 inc VATDue to the high demand from our customers, Special Parts now also offers the pre-assembled steering knuckle repair solution (standard bolt circle 4x100) for the VW Golf 1, Caddy, Scirocco for 16V or G60 brakes on the front axle in the range. Scope of delivery: 2x pre-assembled steering knuckles including wheel hub and wheel bearingInstallation side:front axle on both sidesDrive shaft:without ABS ringMounting type:pre-assembledRim Hole Number:4.0 holeBolt circle diameter [mm]:100 mmOuter diameter [mm]:64 mm, 34 mmWidth [mm]:37 mmInner diameter [mm]:34 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Parts£250.00 inc VAT -
Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake Kits£1,050.00 inc VATAvailable in 7-10 working days from order.Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm
You want to drive 5x100 rims, but don't want to change your original brakes? Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the front and rear axles on the VW Golf 2, 3, Polo 6N (brakes: front axle Ø 312 mm, rear axle Ø 280 mm) is the answer to drive rims with a bolt circle of 5x100. No adapter! No wheel spacers!Scope of delivery: 2x brake disc, front axle 4x set of brake pads, front axle 2x brake callipers, front axle 2x brake calliper bracket, front axle 2x brake hose, front axle 2x brake disc, rear axle 4x brake pads, rear axle 2x brake callipers, rear axle 2x brake calliper carrier, conversion, rear axle 2x wheel hub, rear axle 2x axle journal, rear axle 1x master brake cylinder including installation accessories. The use of this brake conversion kit on public roads generally requires individual approval in accordance with Section 21 of the Road Traffic Licensing Regulations by an officially recognized expert. For individual approval, we therefore provide the required material certificate in the scope of delivery and here under the "Documents" tab.Installation side:front axle, rear axleBrake type:disc brakeBrake caliper design:fist saddleBrake disc type:ventilatedbraking system:ATE, LUCASWear warning contact:not prepared for wear warning indicatorNumber of holes:5Bolt circle diameter [mm]:100.0 mmCentering diameter [mm]:65.0 mmSupplementary Article/Supplementary Info 2:with wheel hub, with integrated magnetic sensor ringNumber of connections:4Outer diameter [mm]:312 mmBore diameter [mm]:15.6 mmWidth [mm]:156.3 mmBrake disc thickness [mm]:25.0 mm, 10 mmThickness [mm]:19.8 mmDiameter [mm]:25.4 mm, 25.4 mmRim width of [inches]:16 inchesthread size:M10x1Height [mm]:34.5 mm, 74.0 mmInner diameter [mm]:135.0 mm, 28 mmPiston diameter [mm]:57 mm, 38 mmLength 1 [mm]:31.5 mmLength 2 [mm]:120.8 mmLength [mm]:375.0 mmMinimum thickness [mm]:22.0 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:280 mm£1,050.00 inc VAT -
Wheel hub conversion kit, front + rear, Audi 80 to 5×112, front = 75mm, rear = 75mm, with wheel bearing, front, rear
Shop by Product Type, Special Parts, HubsAvailable in 10-14 working days from order, Special order terms apply. Wheel hub conversion kit, front + rear, Audi 80 to 5x112, front = 75mm, rear = 75mm, with wheel bearing, front, rear Wheel hub conversion kit from Special Parts to a bolt circle of 5x112 for the front and rear axle of Audi 80. Special Parts wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. Special Parts wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter [mm]:75mm Required quantity:1 Installation side:Front axle, rear axle multi-part:multi-part Unit of measure:Sentence Fits the following vehciles : AUDI 80 B3 notchback (893, 894, 8A2) 1.4 65 hp 1400cc 06/1986 - 10/1991 - 0588 380 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 75 hp 1595 cc 06/1986 - 10/1991 - 0588 382 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 70 hp 1595 cc 06/1986 - 10/1991 - 0588 415 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 102 hp 1595 cc 06/1986 - 10/1991 - AUDI 80 B3 notchback (893, 894, 8A2) 1.6D 54 hp 1588 cc 06/1986 - 10/1991 - 0588 379 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 TD 80 hp 1588 cc 06/1986 - 10/1991 - 0588 384 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 75 hp 1781 cc 06/1986 - 10/1991 - 0588 381 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 113 hp 1847 cc 06/1986 - 10/1991 - 0588 388 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E 112 hp 1781 cc 06/1986 - 10/1991 - 0588 387 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E quattro 112 hp 1781 cc 06/1986 - 10/1991 - 0588 404 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 quattro 113 hp 1847 cc 06/1986 - 10/1991 - 0588 405 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 88 hp 1781 cc 06/1986 - 10/1991 - 0588 385 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 90 hp 1781 cc 06/1986 - 10/1991 - 0588 511 0588 386 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 88 hp 1781 cc 06/1986 - 10/1991 - 0588 402 Chassis number (VIN) from: 89-J-351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 90 hp 1781 cc 06/1986 - 10/1991 - 0588 403 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.9 D 68 hp 1896 cc 06/1986 - 10/1991 - 0588 471 AUDI 80 B3 notchback (893, 894, 8A2) 2.0112 hp1984 cc 06/1986 - 10/1991 -0588 488 0588 407 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 113 hp 1984 cc 06/1986 - 10/1991 - 0588 426 AUDI 80 B3 notchback (893, 894, 8A2) 2.0E 16V 137 hp 1984 cc 06/1986 - 10/1991 - 0588 492 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 16V quattro 137 hp 1984 cc 06/1986 - 10/1991 - 0588 498 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E quattro 113 hp 1984 cc 06/1986 - 10/1991 - 0588 424 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 112 hp 1984 cc 06/1986 - 10/1991 - 0588 495 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 115 hp 1984 cc 06/1986 - 10/1991 - 0588 502 AUDI 80 B3 notchback (893, 894, 8A2) 2.3 quattro 133 hp 2309 cc 06/1986 - 10/1991 - AUDI 80 B4 Avant (8C5) 1.6 E 101 hp 1595 cc 09/1991 - 01/1996 - 0588 580 AUDI 80 B4 Avant (8C5) 1.9 TD 75 hp 1896 cc 09/1991 - 01/1996 - AUDI 80 B4 Avant (8C5) 1.9 TDI 90 hp 1896 cc 09/1991 - 01/1996 - 0588 543 AUDI 80 B4 Avant (8C5) 2.0 90 hp 1984 cc 09/1991 - 01/1996 - 0588 544 AUDI 80 B4 Avant (8C5) 2.0 E 115 hp 1984 cc 09/1991 - 01/1996 - 0588 545 AUDI 80 B4 Avant (8C5) 2.0E 16V 140 hp 1984 cc 09/1991 - 01/1996 - 0588 572 AUDI 80 B4 Avant (8C5) 2.3 E 133 hp 2309 cc 09/1991 - 01/1996 - 0588 546 AUDI 80 B4 Avant (8C5) 2.3 E quattro 133 hp 2309 cc 09/1991 - 01/1996 -0588 547 Rim size [inch]: 15 inches AUDI 80 B4 notchback (8C2) 1.6 71 hp 1595 cc 09/1991 - 07/1995 - 0588 542 AUDI 80 B4 notchback (8C2) 1.6 E 101 hp 1595 cc 09/1991 - 07/1995 - 0588 579 AUDI 80 B4 notchback (8C2) 1.9 TD 75 hp 1896 cc 09/1991 - 07/1995 - 0588 534 AUDI 80 B4 notchback (8C2) 1.9 TDI 90 hp 1896 cc 09/1991 - 07/1995 - 0588 535 AUDI 80 B4 notchback (8C2) 2.0 90 hp 1984 cc 09/1991 - 07/1995 - 0588 519 AUDI 80 B4 notchback (8C2) 2.0 E 115 hp 1984 cc 09/1991 - 07/1995 - 0588 536 AUDI 80 B4 notchback (8C2) 2.0E 16V 140 hp 1984 cc 09/1991 - 07/1995 - 0588 560 AUDI 80 B4 notchback (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 AUDI 80 B4 notchback (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 AUDI 80 B4 notchback (8C2) 2.3 E 133 hp 2309 cc 09/1991 - 07/1995 - 0588 538 AUDI 80 B4 notchback (8C2) 2.3 E quattro 133 hp 2309 cc 09/1991 - 07/1995 - 0588 539 AUDI 80 B4 notchback (8C2) 2.6 quattro 150 hp 2598 cc 09/1991 - 07/1995 - 0588 563 AUDI 80 B4 notchback (8C2) 2.8 quattro 174 hp 2771 cc 09/1991 - 07/1995 - 0588 521£530.00 inc VAT£530.00 inc VAT -
Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100
Shop by Product Type, Special Parts, HubsPre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of the StVZO£295.00 inc VAT£295.00 inc VAT -
Gepfeffert V2 KW Coilover VW Mk7 / 7.5 Golf R + 4WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII ( all )
Gepfeffert V2 with or without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert KW V3 Coilover Suspension Audi B5 S4 RS4
A4 / S4 / RS4, KW Gepfeffert Coilover SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi B5 S4 + RS4 - Lowering range 50-120mm , VW Inox Stainless Steel bodies.£1,810.00 – £2,490.00 inc VATFor more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,810.00 – £2,490.00 inc VAT -
Mk2 Golf SRS-tec 2.2cm Wider Wings ( Pair )
Volkswagen, Golf Mk1 / Mk2 / Mk3, SRS-TecNote The fenders in the original design are widened by 2.2 cm on each side. Optimally suited for extreme lowering. Supplied unpainted, in GRP. primer. Supplied as a pair, made to order.£499.99 inc VAT£499.99 inc VAT -
SRS-Tec Golf Mk8 Wider Wings
SRS-Tecmanufacturer - SRS Tec Fender GT (left and right) Vehicle manufacturer: VW Vehicle model: Golf 8 Type: CD Model year: from 12/2019 – Version: all, except GTE Product details The fenders in the original design are 2.2 cm widened on each side. Optimally suited for extreme lowering. No adjustments to the original front bumper are necessary. Suitable for all Golf 8 R and Variant, except GTE. Document Vehicle-specific TÜV report in accordance with StVZO §19.2, no entry required (in preparation!). material High quality, glass fiber reinforced composite material Product protection Our products and our design are protected by patents worldwide!£559.99 inc VAT£559.99 inc VAT -
Special Parts Driveshafts
Driveshafts£90.00 – £550.00 inc VATSpecial Parts Drive shafts
Specific Vehicle Data , Registration, Chassis number Vehicle make and model is required to process this item, prices may vary from those advertised. Please email our sales team [email protected] for assistance.To achieve extreme lowering, more than just an extra low suspension and wide wings is needed.
For most cars from Volkswagen product range, you need to use special drive shafts. The original shaft, which is often too long, can break the joints or cause massive damage to the gearbox. Also it can touch the body of the car in extreme situations where many cut the chassis leg.
The Special Parts drive shafts direct fit without modification, Accurately engineered and in no way inferior when compared to the original drive shafts.
Available for Audi, Seat, Skoda, Volkswagen.
All shafts are supplied complete with new inner and outer cv joints. Further benefits as these are thinner they allow better chassis leg clearances sometimes removing the need to "chassis notch" or "frame cut".£90.00 – £550.00 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, AUDI RS3 8V Facelift Saloon
SRS-Tec, A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£559.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Make: AUDI Modell: RS3 Type: 8V Model Year: 08/2017 – Submodell: Limousine / Saloon Notice 2,5cm wider per side then the stock wings. Wings can be mounted without any modification on the front bumper. Fit only for RS3 8V facelift Saloon only.£559.99 inc VAT -
SRS-Tec Wide Wings GT, AUDI A4 B7
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Area of use Make: AUDI Modell: A4 Type: B7 (8E) Model Year: 11/2004 – 03/2018 Submodell: all (except RS4) Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wider front fenders GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, Skoda Octavia III
SRS-Tec£519.99 inc VATDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wider front fenders GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS-Tec Wide Front Wings GT, VW Scirocco 3
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide front fender set GT (left & right) Area of use Make: Volkswagen Modell: Scirocco 3 Type: 13 Model Year: from 08/2008 Submodell: All Engine: AllDetails
Notice 2,5cm wider then the original VW fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide front fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec 3cm Wider Wings GT Clean, Seat Leon 1P
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version Clean, without cut outs for the oem indicators Area of use Make: Seat Modell: Leon Type: 1P Model Year: 09/2005 – 09/2012 Engine: AllDetails
Notice 3cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT Clean left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT GP, VW Touran
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide front fender set GT (left & right) Area of use Make: Volkswagen Modell: Touran GP Type: 1T Model Year: 11/2006 – 07/2010 Submodell: All Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec Wide Wings GT, Audi TT 8N
SRS-Tec£519.99 inc VATDescription
Article Wide fender set GT (left & right) Manufacturer SRS-Tec Version With cut outs for the oem indicators Area of use Make: AUDI Modell: TT Type: 8N Model Year: 1998 – 2006 Submodell: All Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
SRS Rear Diffuser GT, VW Up!
Shop by Car, Volkswagen, Up, SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GT Area of use Make: Volkswagen Modell: up! Type: W120 Model Year: from 12/2011 Submodell: All Engine: AllDetails
Special feature The Rear diffuser is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.2 StVZO Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the OEM rear bumper, no modifications necessary. Not for rear bumper with PDC-Sensors.Included
SRS-Tec Rear diffuser GT (unpainted) – TÜV report – Mounting instructions – Mounting material made to order approx 4 weeks delivery.£159.99 inc VAT -
Sale
SRS Roof Spoiler Addon GT, VW Golf VI
SRS-Tec£149.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the VW Golf 6 GTI / GTD / ED35 / R20 Roof Spoiler Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW MK6 Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT (unpainted) – TÜV report – Fitting material£149.99 inc VAT -
SRS R32 Front Bumper Fog Light Grille Set, VW Golf V
SRS-Tec£175.00 inc VATDescription
Manufacturer SRS-Tec Article R32 Front bumper fog light grille set Version For GTI fog lights Area of use Make: Volkswagen Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All Engine: All Notice The grille set fit to the VW Golf 5 R32 Front bumper and the VW Golf 5 GTI fog lightsDetails
Special feature With these grille you can use the VW Golf 5 GTI fog lights in the VW Golf 5 R32 Front bumper Notice Fit only to the VW Golf 5 R32 front bumper and the VW Golf 5 GTI fog lights Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the grille, no modifications necessary. Comes ready to prep, prime and paint. Notice The original VW Golf Mk5 fog lights can be installed in the bumperIncluded
SRS-Tec R32 Fog light grille set (unpainted) – Fitting instructions The Front bumper and the Fog lights are not included. We aim do deliver SRS Tec products in 5 weeks from order depending on availability at SRS-Tec.£175.00 inc VAT -
SRS Rear Diffuser R-Style V6, VW Bora
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version V6 Exhaust Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: All Engine: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the V6 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style V6 (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
mbDESIGN – TURBO S
mbDESIGN WheelsmbDESIGN Aluminium wheel Flowform TURBO S sold as a set of 4, the one piece wheel has real hardware. Contact us via email [email protected] for custom options or if you do not see your fitment. Contact us for custom hardware and cap options.£1,820.00 – £2,200.00 inc VAT£1,820.00 – £2,200.00 inc VAT -
£1,620.00 – £2,000.00 inc VAT -
Muecke 3cm Wider Wings Audi RS3 8V ( Inc Facelift )
Muecke-Carbon & Bodywork Parts ( Wider Wings ), A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air SuspensionWhen lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£519.99 inc VAT- 1 set fiberglass fender Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- not suitable for saloon
- fits both pre facelift and facelift
£519.99 inc VAT -
H&R Deep Coilover Kit for VW Polo 9N/9N3 + Gti (Important : H&R Front Anti Roll Bar required !) Please select Roll Bar option.
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R Coilovers£1,320.00 – £1,826.00 inc VAT£1,320.00 – £1,826.00 inc VAT -
H&R Deep Coilover Kit for Mazda 3 MPS Typ BL Low version F: 40-70mm / R: 40-60:
Suspension, H&R Coilover Suspension, Shop by Car, Mazda, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm Fixed damping:
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover SuspensionH&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm fixed damping Fits RS6 C6 4F C7 4G£1,885.00 inc VAT£1,885.00 inc VAT -
H&R Deep RSS Coilover Kit for Audi B7/QB6 S4 + RS4 50-120mm inc DRC delete kit.
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R CoiloversThe Race Kits utilise Bilstein’s renowned monotube damper technology, the same technology used by BMW’s official DTM teams. The steel dampers benefit from a triple-galvanised coating as well as H&R’s own special protective layer to hold back corrosion. Combined with H&R’s race-spec modular springs these coilovers deliver maximum performance. All applications are height adjustable and some applications have an extra-cost option for 18 damper settings. Lowering Range for this coilover 50-120mm Kits available as fixed damping or with hardness adjustment. Please contact us [email protected] for further queries.£1,915.00 – £1,965.00 inc VAT£1,915.00 – £1,965.00 inc VAT -
Muecke VW Jetta MK5 widened wing 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Jetta wing GFK 2,5 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW MK4 Golf 4 widened wings 2.9cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set Golf 4 widened wings (2.9 cm per side) made of GRP including shipping within Germany
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW Rallye Golf widened wings 2.3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened wings made of fiberglass 2.3 cm per side
- suitable for Rallye Golf
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Seat Leon 1P widened wings 2.7cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Seat Leon 1P GFK wing 2,7 cm widened, 1 set left & right
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Free Shipping
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Seat Leon 5f widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set fiberglass wing 2.5 cm per side widened for Seat Leon 5f
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A3 8P > 2009 clean ( no indicator ) widened wings 4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Audi A3 8P wing GFK 4 cm wider per side
- clean, without blinkers
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (Einzelabhnahme)
- (shown in picture carbon wing 1100, - Euro)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A4B7 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A4B7 wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi TT 8J widened wings 3cm
TT / TTS/ TTRS, Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set of fiberglass Audi TT 8 J wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Audi TT 8S widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened wings 3cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A1 widened wings 3cm per side
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened fiberglass wings 3cm per side, matching the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi RS3 8P widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened wings made of GRP 3cm per side
- unpainted, surface gelcoat gray
- only fitting Audi RS3 8P
- Material report included Delivery according to § 21 StVZO (single acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Rotiform LSE – Alloy Wheel Set ( 4 Wheels )
Shop by Product Type, Wheels, Rotiform WheelsWe build the Rotiform LSE as a simple yet effective way to increase your ride’s style. Featuring a timeless, unique y-spoke design and robust MonoBlock construction, the LSE delivers style and iconic Rotiform attitude in one sleek package. We make the LSE in 19” and 20” diameters with euro-specific bolt patterns and offsets. Think of it as a custom-tailored wheel for your European sedan.£1,349.00 – £1,369.00 inc VAT-
- Available in OEM-inspired finishes: Anthracite, Satin Black, Gloss Silver
- 19”-20” Euro-Specific Sizing
- Unique Mesh, Y-Spoke Design
£1,349.00 – £1,369.00 inc VAT -
-
Rotiform DTM – Alloy Wheel Set ( 4 Wheels )
Shop by Product Type, Wheels, Rotiform WheelsThe Rotiform DTM wheels are designed with a clean, motorsport-inspired aesthetic that pays homage to classic racing wheels. Featuring a simple yet striking spoke design and a deep concave profile, the DTM delivers a timeless look while enhancing vehicle performance. Its lightweight monoblock construction offers durability and improved handling, making it perfect for sports cars, sedans, and track-ready builds. Available in versatile finishes the DTM brings a refined, retro-inspired edge to any car, appealing to drivers who appreciate both style and function. With Rotiform’s renowned craftsmanship, the DTM combines classic styling cues with modern engineering.£1,299.00 – £1,429.00 inc VAT- Available in OEM-inspired finishes: Matte Anthracite, Matte Black, Gloss Silver
- 17”-20” Euro-Specific Sizing
- Unique Mesh, Multi-Spoke Design
£1,299.00 – £1,429.00 inc VAT -
Sold out
Rotiform TUF-R – Alloy Wheel Set ( 4 Wheels )
Shop by Product Type, Wheels, Rotiform WheelsThe Rotiform TUF-R wheels are designed with a clean, motorsport-inspired aesthetic that pays homage to classic racing wheels. Featuring a simple yet striking spoke design and a deep concave profile, the TUF-R delivers a timeless look while enhancing vehicle performance. Its lightweight monoblock construction offers durability and improved handling, making it perfect for sports cars, sedans, and track-ready builds. Available in versatile finishes the TUF-R brings a refined, retro-inspired edge to any car, appealing to drivers who appreciate both style and function. With Rotiform’s renowned craftsmanship, the TUF-R combines classic styling cues with modern engineering.£1,429.00 inc VAT- Available in OEM-inspired finishes: Matte Anthracite, Matte Black, Gloss Silver
- 18”-20” Euro-Specific Sizing
- Unique Mesh, Multi-Spoke Design
£1,429.00 inc VAT -
Brake hose, front axle, pair , VW VW Golf 2 GTi G60
Shop by Product Type, Brake conversion parts£24.90 inc VATBrake hose front axle pair
Brake hose Installation side front axle Length [mm] 330.0 Internal thread 1 [mm] M10x1 Internal thread 2 [mm] M10x1 Wrench size 1 [mm] 15.5 Quantity unit Piece multi-part one-partInstallation side:front axleInternal thread 1 [mm]:M10x1 mmInternal thread 2 [mm]:M10x1 mmLength [mm]:330.0 mmWrench size 1 [mm]:15.5 mmmulti-part:one-pieceUnit of measure:Piece£24.90 inc VAT -
Wheel hub conversion kit, front + rear, Audi 80, 90, 5 x 112, plug and play, front: 82 mm, rear: 75 mm
HubsAvailable in 10-14 working days from order, Special order terms apply.£530.00 inc VATWheel hub conversion kit, front + rear, Audi 80, 90, 5 x 112, plug and play, front: 82 mm, rear: 75 mm
Wheel hub conversion kit for a bolt circle of 5x112 for the front and rear axles of Audi 80, 90, etc. The wheel hubs are manufactured to a precise fit and can be installed using the original wheel bolts. They are also fully galvanized and therefore very durable. The wheel hubs are plug-and-play installation – no adapters, etc. are required . The perfect solution for using rims with a bolt circle of 5x112. The use of these wheel hubs on public roads generally requires individual approval in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO). For individual approval, we therefore include the required material certificate in the scope of delivery and here under the "Documents" tab.Fits the following vehicles :Installation side:Rear axle, front axle on both sidesType of approval:subject to registrationRim hole number:5-holeBolt circle diameter [mm]:112 mmOuter diameter 1 [mm]:39 mm, 43 mmOuter diameter 2 [mm]:131 mmOuter diameter [mm]:82 mmWidth [mm]:90 mm, 92.3 mm, 37 mmThread size:M14x1.5Inner diameter [mm]:45 mmNumber of teeth:33, 38multi-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special PartsManufacturer Model type Performance displacement Year of construction HSN TSN restrictions AUDI 80 B4 Avant (8C5) 2.0 E 115 hp 1984 cc 09/1991 - 01/1996 - 0588 545 AUDI 80 B4 Avant (8C5) 2.3 E 133 hp 2309 cc 09/1991 - 01/1996 - 0588 546 AUDI 80 B4 Saloon (8C2) 2.0 90 hp 1984 cc 09/1991 - 07/1995 - 0588 519 AUDI 80 B4 Saloon (8C2) 2.0 E 115 hp 1984 cc 09/1991 - 07/1995 - 0588 536 AUDI 80 B4 Saloon (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 AUDI 80 B4 Saloon (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 AUDI COUPE B3 (89, 8B3) 2.0 115 hp 1984 cc 10/1988 - 12/1996 - 0588 501 AUDI COUPE B3 (89, 8B3) 2.0 16V 140 hp 1984 cc 10/1988 - 12/1996 - 0588 557 £530.00 inc VAT -
Brake conversion kit, VA Front, G60 brake for VW Golf 1 Cabrio, calipers, brackets, discs, Brembo, without adapter, 280 mm
Shop by Product Type, Golf Mk1 / Mk2 / Mk3, Special Parts, Brake Kits£490.00 inc VATBrake conversion kit, front axle, G60 brake for VW Golf 1 Cabriolet, calipers, brackets, discs, Brembo, without adapter, 280 mm
Want to run the high-performance G60 brake system but keep using your 4x100 wheels – without adapters or wheel spacers? Then this complete front brake conversion kit is the perfect solution for your Golf 1 Cabriolet . The kit allows you to upgrade to a 280 mm G60 brake system with high-quality components – for significantly improved braking performance and high durability, ideal for performance upgrades and tuning projects . No adapters required. No wheel spacers needed. 4x100 bolt pattern retained. Product benefits at a glance: - Complete kit for front axle brake conversion - G60 brake system with 280 mm brake discs - Fits VW Golf 1 Cabriolet - Optimized for 4x100 bolt pattern - Improved braking performance and thermal capacity - Ideal for tuning, engine conversions, and sporty driving. Scope of delivery: 2x brake discs (front axle) , 1x set of brake pads (front axle) , 2x brake calipers , 2x caliper brackets. This conversion kit is the ideal choice for anyone who wants to combine an original G60 brake system with modern requirements – without compromising on fit or appearance. Perfectly suited for Golf 1 Cabriolet conversions , especially with more powerful engines or sporty driving . Note: Please check before ordering whether the vehicle and conversion are compatible with the desired brake system.Installation side:front axleBrake type:disc brakeBrake caliper design:Fist saddleBrake disc type:Internally ventilated, slottedBraking system:LUCASSurface:coatedNumber of holes:4Centering diameter [mm]:65 mmSupplementary article/Supplementary information 2:with screwsTightening torque [Nm]:110 NmWidth [mm]:119.0 mmBrake disc thickness [mm]:22 mmThickness [mm]:19.6 mmHeight [mm]:39 mm, 70.0 mmPiston diameter [mm]:54 mmMinimum thickness [mm]:20 mmmulti-part:multi-partUnit of measure:SentenceQuantity required:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:280 mm£490.00 inc VAT -
Muecke VW MK 8 widened wings 3 cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )When lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side 3cm Please contact us if this something you would like to look into, and would like a quote.£559.50 inc VAT- 1 set left & right widened fiberglass fenders 3cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- mounting of the arch liner only possible with modification
£559.50 inc VAT -
Muecke Audi A4 B9 8K facelift widened wings 2.5 cm
Shop by Car, Audi, A4 / S4 / RS4, Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right GFK wing 3cm widened per side
- suitable from BJ 2011, matching the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
2x anchor plate, splash guard, front axle, VW Golf 1/2/3, conversion G60 280 mm brake
Shop by Product Type, Special Parts, Brake Kits£39.00 inc VAT2x anchor plate, splash guard, front axle, VW Golf 1/2/3, conversion G60 280 mm brake
In our program: Due to the high demand from our customers, Special Parts also offers the anchor plates or splash guards for the front axle of the VW Golf 1/2/3, conversion G60 280 mm brake in the range.Installation side:front axleSurface:phosphated, painted, KTL-coated (cathod dip painting)multi-part:two-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:312 mm, 280 mm£39.00 inc VAT -
StillStatic “GotTheDrop” 2024 T-Shirt
Shop by Product Type, Stillstatic MerchandiseOur StillStatic Present GotTheDrop show T Shirt design collab with "mitchybwoy" The white T shirt is regular fit with Black print The black T shirt is a heavier "Oversize" cut with Colour rear print£25.00 – £35.00 inc VAT
£25.00 – £35.00 inc VAT -
Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm
Shop by Car, Audi, Polo, A1 / S1, KW Gepfeffert Coilover SuspensionAudi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover£1,790.00 – £2,290.00 inc VATFits the following models:
- Aud S1 8X 2014>
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,790.00 – £2,290.00 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,959.99 inc VATH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>
RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model please check RSS-13-471-5/1SC For any queries please contact [email protected]£1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.£1,959.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mmThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
Sold out
Transporter T5 / 6 / 6.1 356mm Rear Disc Upgrade
Shop by Product Type, Shop by Car, Transporter, Brake KitsRear 356mm x 22mm Big Brake Disc kit Kit Includes New OE Redrilled 356mm Discs New Carriers and adapters New hardware Discs spacer All parts are supplied in raw OE finishes, an example of a completed installed kit is shown with the yellow powder coat finish. We also have Front Transporter brake kit options 365mm with Porsche 6 pot Cayenne caliper, or 400mm SQ7 kit with 6 pot akebono caliper.£750.00 inc VAT£750.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm With Camber adjustable top mounts ( Front Strut Clamp + Twist Beam Rear ) Lowering : 80-140mm (Copy)
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hub diameter and twist beam rear suspension only. Lowering is 80-140mm with front adjustable camber top mounts. H&R Deep are monotube dampers with superior comfort while still be lower than " normal " versions. This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors. Supplied suspension may differ from image shown.£2,339.00 inc VAT£2,339.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm ( Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hum diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.£1,695.00 inc VAT£1,695.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Moderate Low Version 40-75mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,335.00 – £2,120.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-75mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,335.00 – £2,120.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Low Version 60-120mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,685.00 – £2,590.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
Gepfeffert V1 with adjustable camber dome bearings
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with full payloads and maximum axle loads, the dampers always operate with a sporty characteristic curve. KW Variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,685.00 – £2,590.00 inc VAT -
Gepfeffert KW Coilover VW Mk4 Audi A38L TT8N Beetle Bora Seat Leon 1M – 2WD
Audi, A3 / S3 / RS3, KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,695.00 – £2,020.00 inc VATGepfeffert KW Coilover suspension 2WD (low version)
Fits the following models:
- VW Golf IV / Beetle / Bora
- Audi TT 8N / A3 8L
- Seat Leon 1M
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information: V2
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - komplette Dokumentation für einfache Anwendung £1,695.00 – £2,020.00 inc VAT -
MB Design – KV4 Wheels Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, TransporterMB Design - KV4 Wheels available fitment : 8.5" x 18" ( Load Rated : 1008 KG per wheel ) 8.5 x 19" ( Load Rated 850 KG Per Wheel ) 9" x 20" ( Load Rated : 965 KG per wheel ) Offset : ( custom offset and finish available by enquiry ) PCD : 5 x 120 Direct to Bore 65.1 fitment. Concave design. Big brake friendly. Priced per wheel. High Quality German Made. ( On Back order : Made to Order approx 6 weeks enquire via [email protected] )£395.00 – £545.00 inc VAT£395.00 – £545.00 inc VAT -
SRS-Tec Rear spoiler H-Style, VW Golf II Mk2
Shop by Product Type, Shop by Car, Volkswagen, Golf Mk1 / Mk2 / Mk3, SRS-TecHersteller SRS-Tec Article Rear spoiler H-Style Area of use Vehicle manufacturer: VW Model: Golf II Mk2 Typ: 19E Model year: 08/1983 – 12/1992 Submodel: all (besides convertible) Disclaimer This is not an original Volkswagen AG product. Details Notice Suitable without modifications for the VW Golf Mk2 tailgate. Expert’s report German TÜV report (in preperation) Material Made in Germany – GRP composite Assembly Screw and glue to the tailgate. This product is delivered unpainted.£260.00 inc VAT£260.00 inc VAT -
Wheel hub conversion kit Audi 80 S2 with 82mm wheel bearing
Shop by Product Type, Special Parts, HubsAvailable in 10-14 working days from order. Special order terms apply. Wheel hub conversion kit, front or rear Audi 80 S2 with 82mm wheel bearing ( for 75mm bearing please check our other listing ) Please email us your chassis number so we can check fitment before ordering via [email protected] Wheel hub conversion kit to a bolt circle of 5x112 for the front axle of the Audi 80 and 90 series with an 82 wheel bearing diameter. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter 1 [mm]:43mm Outer diameter 2 [mm]:131mm Required quantity:1 Width (mm]:92.3mm Installation side:Front axle on both sides Rim hole number:5 -hole Thread size:M14x1.5 Manufacturer approval:Special parts Hole circle Ø [mm]:112mm multi-part:two parts Unit of measure:Sentence Number of teeth:38 Admission type:subject to registration P/N 46859 to fit :£289.00 – £550.00 inc VAT
Wheel Hub conversion kit front and rear : 895 407 615AManufacturer Model type Leistung Hubraum year of construction HSN TSN restrictions AUDI 80 B4 Avant (8C5) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 01/1996 - 0588 573 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Avant (8C5) 2.0 quattro 107 hp 1984 cc 09/1991 - 01/1996 - Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Avant (8C5) 2.3 E quattro 133 hp 2309 cc 09/1991 - 01/1996 - 0588 547 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) 2.6 quattro 150 hp 2598 cc 09/1991 - 01/1996 - 0588 565 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) 2.8 quattro 174 hp 2771 cc 09/1991 - 01/1996 - 0588 549 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) S2 quattro 230 hp 2226 cc 09/1991 - 01/1996 - 0588 575 Rim size [inch]: 16 inches AUDI 80 B4 Saloon (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Saloon (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Saloon (8C2) 2.3 E quattro 133 hp 2309 cc 09/1991 - 07/1995 - 0588 539 Rim size [inch]: 16 inches AUDI 80 B4 Saloon (8C2) 2.6 quattro 150 hp 2598 cc 09/1991 - 07/1995 - 0588 563 Rim size [inch]: 16 inches AUDI 80 B4 Saloon (8C2) 2.8 quattro 174 hp 2771 cc 09/1991 - 07/1995 - 0588 521 Rim size [inch]: 16 inches AUDI 80 B4 Saloon (8C2) S2 quattro 230 hp 2226 cc 09/1991 - 07/1995 - 0588 574 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.3 quattro 136 hp 2309 cc 10/1988 - 12/1996 - 0588 433 0588 446 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.3 quattro 134 hp 2309 cc 10/1988 - 12/1996 - 0588 497 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.6 quattro 150 hp 2598 cc 10/1988 - 12/1996 - 0588 566 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.8 quattro 174 hp 2771 cc 10/1988 - 12/1996 - 0588 523 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) S2 quattro 220 hp 2226 cc 10/1988 - 12/1996 - 0588 503 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) S2 quattro 230 hp 2226 cc 10/1988 - 12/1996 - 0588 569 Rim size [inch]: 16 inches Manufacturer Model type Performance displacement year of construction HSN TSN restrictions AUDI 80 B4 Avant (8C5) 2.0 E 115 hp 1984 cc 09/1991 - 01/1996 - 0588 545 AUDI 80 B4 Avant (8C5) 2.3 E 133 hp 2309 cc 09/1991 - 01/1996 - 0588 546 AUDI 80 B4 Saloon (8C2) 2.0 90 hp 1984 cc 09/1991 - 07/1995 - 0588 519 AUDI 80 B4 Saloon (8C2) 2.0 E 115 hp 1984 cc 09/1991 - 07/1995 - 0588 536 AUDI 80 B4 Saloon (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 AUDI 80 B4 Saloon (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 AUDI COUPE B3 (89, 8B3) 2.0 115 hp 1984 cc 10/1988 - 12/1996 - 0588 501 AUDI COUPE B3 (89, 8B3) 2.0 16 V 140 hp 1984 cc 10/1988 - 12/1996 - 0588 557 £289.00 – £550.00 inc VAT -
Sold out
2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right
Shop by Product Type, Special Parts, Brake Kits2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right In our range: Due to high demand from our customers, Special Parts now also offers this complete brake caliper set for VW Golf 7 GTI Performance, 340 mm, calipers + holder, rear axle left right in our range. Scope of delivery: 2x brake caliper 2x brake caliper holder Required quantity:1 Caliper color:red Braking system:TRW Installation side: Front axle left, front axle right Piston diameter [mm]:60mm Material:Gray cast iron multi-part:multi-part Unit of measure:Sentence£739.00 inc VAT£739.00 inc VAT -
Rear Set Brake Disc + Pads + Rear wheel bearing 5 x 100 VW Golf II/III Corrado Passat Vento
Shop by Product Type, Special Parts, Brake KitsBrake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]:226mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Brake disc type:Full Brake disc thickness [mm]:10.0mm Braking system:LUCAS Installation side:rear axle Manufacturer approval:Frenix Number of holes:5 Hole circle Ø [mm]:100mm multi-part:multi-part Unit of measure:Sentence VW CORRADO (53I) 2.9 VR6 190 hp 2861 cc 08/1987 - 12/1995 - 0600 905 VW GOLF III (1H1) 1.9 TDI 110 hp 1896 cc 10/1989 - 07/1998 - 0603 387 0600 279 VW GOLF III (1H1) 2.0 115 hp 1984 cc 10/1989 - 07/1998 - 0603 388 0600 893 VWGOLF III (1H1)2.0 GTI 16V 150 hp1984 cc10/1989 - 07/1998 -0603 3900600 908 VWGOLF III (1H1)2.8 VR6 174 hp 2792 cc 10/1989 - 07/1998 -0600 8940603 391 VWGOLF III Variant (1H5) 1.9 TDI 110 hp 1896 cc 07/1993 - 04/1999 -0603 4020600 281 VWGOLF III Variant (1H5) 2.0 115 hp1984 cc07/1993 - 04/1999 -0600 9400603 403 VWPASSAT B3/B4 (3A2, 35I) 1.9 TDI 110 hp 1896 cc 02/1988 - 12/1997 -0600 297 Brake type: drum brake VWPASSAT B3/B4 (3A2, 35I) 2.0 16V 150 hp 1984 cc 02/1988 - 12/1997 -0600 949 VWPASSAT B3/B4 (3A2, 35I) 2.8 VR6 174 hp 2792 cc 02/1988 - 12/1997 -0600 835 VWPASSAT B3/B4 Variant (3A5, 35I) 1.9 TDI 110 hp1896 cc02/1988 - 06/1997 -0600 298Year ofmanufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.0 16V 150 hp1984 cc02/1988 - 06/1997 -0600 950Year of manufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.8 VR6 174 hp2792 cc02/1988 - 06/1997 -0600 836 SEATTOLEDO I (1L2)2.0 i 16V 150 hp1984 cc 01/1991 - 10/1999 -7593 374 Year of manufacture until: 09.98 for combined PR number: 1KD+1KKYear of manufacture from: 09.96 VWVENTO (1H2) 2.0 115 hp 1984 cc11/1991 - 09/1998 - 0600 9000603 414 VWVENTO (1H2) 2.8 VR6 174 hp2792 cc11/1991 - 09/1998 - 0603 4150600 901£120.00 inc VAT£120.00 inc VAT -
Sale
Brake disc conversion kit, VA ( Front ), VW Passat 35i without plus axle 280mm G60 conversion bolt circle 5×100
Shop by Product Type, Special Parts, Brake KitsBrake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]: 226mm Required quantity: 1 Braking/driving dynamics: for vehicles with ABS Brake disc type: Full Brake disc thickness [mm]: 10.0mm Braking system: LUCAS Installation side: rear axle Manufacturer approval: Frenix Number of holes: 5 Hole circle Ø [mm]: 100mm multi-part: multi-part Unit of measure: Sentence£95.00 inc VAT£95.00 inc VAT -
Pre-assembled steering Hub, VA Front left + Right, VW GOLF II / III with ABS 4x 100
Shop by Product Type, Special Parts, HubsPre-assembled steering knuckle, VA left + Right, VW GOLF II / III with / or without ABS 4x 100 Pre-assembled steering knuckle for standard bolt circle of 4x100 for Seat Ibiza II, VW Caddy II, VW Golf II, with ABS, front axle left, consisting of 1x steering knuckle 1x wheel bearing set 1x wheel hub mounting accessories suitable pre-assembled steering knuckle right: 107764/5 Supplementary article/Supplementary information 2: with wheel bearing, with wheel hub, with sensor, wheel speed Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle left Manufacturer approval:assembled/assembled, special parts multi-part:multi-part Unit of measure:Sentence paired article number: 107764/5£295.00 inc VAT£295.00 inc VAT -
Sale
Wheel hub conversion kit, VA, VW Golf 2, 3, Jetta 2, with ABS ring (22 teeth) to 5×100
Shop by Product Type, HubsWWheel hub conversion kit, VA, VW Golf 2, 3, Jetta 2, with ABS ring (22 teeth) to 5x100 Wheel hub conversion kit to a bolt circle of 5x100 for the front axle VW Golf 2, 3, Seat Ibiza and much more. including ABS ring. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x100. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter 1 [mm]:40mm Outer diameter 2 [mm]:120.5mm Required quantity:1 Width (mm]:74mm Installation side:Front axle on both sides Rim hole number:5 -hole Thread size:M14x1.5 Manufacturer approval:Special parts Hole circle Ø [mm]:100mm multi-part: two parts Unit of measure: Sentence Number of teeth: 22£150.00 inc VAT£150.00 inc VAT -
Sale
Wheel hub conversion kit, Front Axle – No ABS , VW Golf 2, 3 to 5×100 (+ Rear for Golf Rallye/Syncro)
Shop by Product Type, HubsWheel hub conversion kit, VA, VW Golf 2, 3 to 5x100 (RA for Golf 3 VR6) Wheel hub conversion kit to a bolt circle of 5x100 for the front axle VW Golf 2, 3, Seat Ibiza and much more. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x100. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter 1 [mm]:40mm Outer diameter 2 [mm]:120mm Required quantity:1 Width (mm]:74mm Installation side:Front axle on both sides, Rear Axle Syncro Golf Rallye Rim hole number:5.0 -hole Thread size:M14x1.5-6H Manufacturer approval:Special parts Hole circle Ø [mm]:100.0mm Number of teeth:22£150.00 inc VAT£150.00 inc VAT -
VW Golf 2, 3, Polo 6N Front Brake conversion kit 312mm 5 x 100
Shop by Product Type, Special Parts, Brake KitsBrake conversion kit, VA, VW Golf 2, 3, Polo 6N, 312 mm brake, 5 x 100 Do you want to fit 5x100 wheels but don't want to change your original brakes? Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the front axle of the VW Golf 2, 3, Polo 6N (312 mm brake) perfect for those using our 5x100 hubs on mk2 applications without adapters. Scope of delivery: 2x brake disc 1x set of brake pads 2x brake caliper 2x brake caliper holder 2x brake hose 1x mounting kit for 5x100 hub kit please check our lisiting 46732/5 and rear 256mm kit kit 111.047.014SP Centering diameter [mm]:65.0mm Outer diameter [mm]:312mm Required quantity:1 Bore Ø [mm]:15.6mm Width (mm]:156.3mm Brake disc type:vented Brake disc thickness [mm]:25.0mm Braking system:ATE Thickness/Thickness [mm]:19.8mm Installation side:Front axle Rim width of [inches]:16 inches Manufacturer approval:Special parts Height [mm]:34.5mm, 74.0mm Inner diameter [mm]:135.0mm Piston diameter [mm]:54.0mm Length [mm]:375.0mm Number of holes:5 Hole circle Ø [mm]:100.0mm Minimum thickness [mm]:22.0mm£590.00 inc VAT£590.00 inc VAT -
MTS Suspension Adjustable Camber Castor Top Mounts BMW
Suspension, Coilover Suspension Parts, MTS Suspension Accessories, MTS SuspensionAdjustable camber / caster plates (front) BMW 5 Series / E34 Sedan Adjustable camber / caster plates (front) MTS Technik for BMW 5 Series / E34 Sedan allows you to adjust the angle of inclination of the wheels relative to the ground and the lead angle of the kingpin. Evolution 2 - the latest generation of MTS Technik top mounts. When designing the new, improved upper mounts, we were inspired by the slogan 'Daily stance - basic motorsport'. We wanted the product to have sports features (increased stiffness, new uniball bearing, angle adjustment) while minimizing the nuisance in everyday use and high aesthetics required by showcar event cars (aesthetic black-gold). 2 years warranty 2 year warranty with no mileage limit to confirm high quality. High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials. Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.£259.00 inc VAT£259.00 inc VAT -
H&R Deep Coilover Kit for Porsche 924 , 944, 968 20mm Clamp + with aluminum rear axle only
Suspension, H&R Coilover Suspension, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep coilover kit for 924/944/968 Fixed damping deep H&R coilover based on RSS race derived coilover. Fixed damping for optimum comfort. Lowering range front : 60-90 rear : 50-80 Fits 20mm front hub clamp Fits vehicles with alluminium rear axle only, for steel axle choose :RSS-37-827-2/7 Made to order 3-4 weeks. The Product is a version with extreme lowering beyond the H&R standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,479.00 inc VAT£2,479.00 inc VAT -
Gepfeffert / KW Porsche 964 C2 C4 V3 Coilovers
KW Gepfeffert Coilover Suspension, Gepfeffert KW Coilover Suspension Porsche£3,088.00 – £4,240.00 inc VAT
Fits:
Porsche 993 C2 C4 10/1993>>
Normal version Lowers car by: F 20-40mm / R 10-30mm
Gepfeffert Version : FT 40-90mm / R 40-90mm
Gepfeffert Clubsport Version : FT 40-100mm / R 40-100mm
• Independently adjustable damping technology -rebound and compression damping
• inox-line stainless steel technology at no extra charge
• Individual height adjustment
• German TUV-tested adjustment parameters
• High-quality components for long life
• Comprehensive documentation for ease of use
• Infinitely adjustable rebound damping
• 14- level adjustable compression damping
• Unique, independently functioning damping power adjustment
Variant 3 race technology for the road with adjustable compression and rebound damping. The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. £3,088.00 – £4,240.00 inc VAT -
Gepfeffert V3 KW Coilover Audi RS3 8Y 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,450.00 – £2,920.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi RS3 8Y
- DDC Delete kit maybe required
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,450.00 – £2,920.00 inc VAT -
-
Gepfeffert V2 KW Coilover BMW 1 Series (F20, F21) / 3 Series (F30) / 4 Series (F32) (with adjustable camber top mount)
Shop by Car, KW Gepfeffert Coilover Suspension, 3 Series KW Gepfeffert Coilovers, 1 Series KW Gepfeffert Coilovers, 4 Series KW Gepfeffert Coilovers£2,095.00 – £2,455.00 inc VATFits the following models:
- 1er (F20, F21) Typ 1K2, 1K4
- 3er (F30) + X Drive
- 4er (F32) Typ 3C
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,095.00 – £2,455.00 inc VAT -
Gepfeffert KW Coilover MQB + PQ35 Anti Roll Bar links 310mm
Gepfeffert KW Spare PartsGepfeffert KW Coilover MQB + PQ35 Anti Roll Bar links 310mm priced individually. Fits Mk5 Mk6 Mk7 and similar Audi Platfoms A3 8P 8V TT Please contact us if you have any questions.£39.00 inc VAT£39.00 inc VAT -
Gepfeffert V3 Coilover suspension Golf 1 / Jetta 1 / Scirocco 1 Low Version 80-150mm
Shop by Car, Volkswagen, Golf Mk1 / Mk2 / Mk3, KW Gepfeffert Coilover Suspension, Golf Mk1 / Mk2 / Mk3 Gepfeffert Coilovers Suspension£2,180.00 – £2,570.00 inc VATGepfeffert KW INOX V3+ coilover suspension for Golf I / Jetta I / Scirocco I (lower version) 80-150mm
For more stability or ride comfort. With adjustable compression and rebound damping.
Special order kits coilover can not be cancelled once ordered , our terms and conditions apply for all custom made kits. Delivery timescale 6-8 weeks. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,180.00 – £2,570.00 inc VAT -
Gepfeffert V3 Coilover VW Golf 2 / 3 / Corrado / Jetta 2 / Vento 3
KW Gepfeffert Coilover Suspension, Golf Mk1 / Mk2 / Mk3 Gepfeffert Coilovers Suspension£2,180.00 inc VATFor more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,180.00 inc VAT -
Gepfeffert V3 KW Coilover Suspension Audi RS6 RS7 C7 4G
Shop by Product Type, Suspension, A6 / S6 / RS6, A7 / S7 / RS7, KW Gepfeffert Coilover Suspension£3,610.00 inc VATGepfeffert KW coilover suspension V3 Audi RS6 / RS7 (4G/C7) with MR/DRC decommissioning kit
Lowering range 40-95mm.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product– damping technology adjustable in rebound – damping technology adjustable in compression – Stainless steel technology inox-line – Individual, stepless lowering – tested adjustment range – ready-to-install complete solution – High quality components for long service life – complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£3,610.00 inc VAT -
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T25 T28 T30
Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW Coilovers£2,790.00 inc VATGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Cylinder Clamp T25 T28 T30 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,790.00 inc VAT -
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32
Shop by Car, Volkswagen, Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW Coilovers£2,790.00 inc VATGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Clamp brackett T32 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,790.00 inc VAT -
Gepfeffert V3 KW Coilover VW Transporter T7 2WD
Shop by Product Type, Suspension, Transporter, KW Gepfeffert Coilover Suspension, T7 Transporter£2,989.00 inc VATGepfeffert KW V3 coilover for Transporter T7
For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 50-100mm.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,989.00 inc VAT -
H&R Deep Coilover Kit for VW Golf MK8 R and 4Motion
H&R Coilover Suspension, Golf 7 / 7.5 / Mk8 H&R Deep Coilover Suspension£1,660.00 – £1,930.00 inc VATH&R Deep Coilover Kit for VW Golf MK8 R + 4 Motion inc Adjustable Camber Top Mounts
The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R's own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
£1,660.00 – £1,930.00 inc VAT -
Gepfeffert V3 Coilover VW Mk4 R32 4 Motion
Shop by Product Type, KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£2,095.00 – £2,595.00 inc VATFits the following models:
- VW Golf IV 4MOTION incl R32
- Audi TT 8N (nur quattro)
- A3 / S3 8L (nur quattro)
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Note: The picture may differ from the delivered productThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,095.00 – £2,595.00 inc VAT -
Gepfeffert V3 KW Coilover Audi TT TTS TTRS 8S 4WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover, Audi TT TTS TTRS KW Gepfeffert Suspension£2,370.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi TT 4 motion
- Audi TTS
- Audi TTRS
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,370.00 – £2,720.00 inc VAT -
-
Gepfeffert V2 KW Coilover Audi TT TTS TTRS 8S 4WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,095.00 inc VATFits the following models:
- Audi TT 4 motion
- Audi TTS
- Audi TTRS
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Audi A3 S3 RS3 8V 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,095.00 inc VATFits the following models:
- Audi A3 8v 4motion
- Audi S3 8V
- Audi RS3 8V
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,095.00 inc VAT -
Gepfeffert V3 KW Coilover Audi A3 S3 RS3 8V 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,370.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi A3 8v 4motion
- Audi S3 8V
- Audi RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,370.00 – £2,720.00 inc VAT -
-
Sale
Gepfeffert KW DDC Plug and Play Coilovers Audi TT TTS TTRS 8S 2WD + 4WD 35-70mm
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,682.00 inc VATFits the following models:
- Audi TTS 8S
- Audi TTRS 8S
- Audi TT 8S
Gepfeffert DDC without adjustable camber dome bearings
The gepfeffert DDC without adjustable camber dome bearings is mounted with the standard support bearings. We refer to the gepfeffert chassis without camber dome bearings as the "small depth version". Definition "small depth version": We distinguish here coilovers of the brand gepfeffert.com made by KW, with or without adjustable camber dome bearings (model & platform dependent). The suspensions without camber dome bearings have up to 35mm more lowering, compared to a standard KW coilover suspension. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-70mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Individual or maximum lowering
KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a stylish and sporty lowering according to your individual ideas. The adaptive KW coilovers are available as KW DDC Plug & Play variants for vehicle models with electronically controlled standard suspension.More comfort or more sport - you decide
More and more premium vehicles today are equipped with an adaptive suspension system. Until the market launch of KW DDC Plug & Play, you often had to compromise on an individual desired lowering and often even do without your extra paid active control systems and comfort features. In contrast, with the adaptive KW DDC Plug & Play coilovers, you are free of compromises and can combine the control of your standard damper system with a stepless lowering and the driving dynamics of a KW coilover suspension.The gepfeffert.com® DDC Plug & Play coilover suspension made by KW
During installation, the standard struts are simply replaced with the KW struts manufactured in stainless steel technology "inox-line" and the adaptive KW dampers are connected to the standard on-board electronics using the original connectors from your car manufacturer. No further assembly steps are necessary with the KW DDC Plug & Play coilovers. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover suspension. The existing control system and the switch installed in the interior for operating the damper control are retained.Technical information:
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .
Note: The picture may differ from the delivered product- Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,682.00 inc VAT -
Gepfeffert V3 KW Coilover Audi TT 8S 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V3 KW Coilover Audi A3 8V 2WD
Shop by Car, KW Gepfeffert Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V3 KW Coilover Seat Leon 5F 2WD
KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V3 KW Coilover Skoda Octavia 5E 2WD
Shop by Car, KW Gepfeffert Coilover Suspension, Skoda Octavia KW Gepfeffert Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V2 KW Coilover Audi TT 8S 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Audi A3 8V 2WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Seat Leon 5F 2WD
KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Skoda Octavia 5E 2WD
KW Gepfeffert Coilover Suspension, Skoda Octavia KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V1 KW Coilover Audi TT 8S with camber adjustable top mounts 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert V1 KW Coilover Audi A3 8V with camber adjustable top mounts 2WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert V1 KW Coilover Seat Leon 5F with camber adjustable top mounts 2WD
KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert V1 KW Coilover Seat Skoda Octavia 5E with camber adjustable top mounts 2WD
Shop by Car, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover, Skoda Octavia KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Sale
Gepfeffert KW DDC Plug and Play Coilovers VW Golf Mk7 / 7.5 2WD + 4WD 35-70mm
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£2,682.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert DDC without adjustable camber dome bearings
The gepfeffert DDC without adjustable camber dome bearings is mounted with the standard support bearings. We refer to the gepfeffert chassis without camber dome bearings as the "small depth version". Definition "small depth version": We distinguish here coilovers of the brand gepfeffert.com made by KW, with or without adjustable camber dome bearings (model & platform dependent). The suspensions without camber dome bearings have up to 35mm more lowering, compared to a standard KW coilover suspension. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-70mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Individual or maximum lowering
KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a stylish and sporty lowering according to your individual ideas. The adaptive KW coilovers are available as KW DDC Plug & Play variants for vehicle models with electronically controlled standard suspension.More comfort or more sport - you decide
More and more premium vehicles today are equipped with an adaptive suspension system. Until the market launch of KW DDC Plug & Play, you often had to compromise on an individual desired lowering and often even do without your extra paid active control systems and comfort features. In contrast, with the adaptive KW DDC Plug & Play coilovers, you are free of compromises and can combine the control of your standard damper system with a stepless lowering and the driving dynamics of a KW coilover suspension.The gepfeffert.com® DDC Plug & Play coilover suspension made by KW
During installation, the standard struts are simply replaced with the KW struts manufactured in stainless steel technology "inox-line" and the adaptive KW dampers are connected to the standard on-board electronics using the original connectors from your car manufacturer. No further assembly steps are necessary with the KW DDC Plug & Play coilovers. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover suspension. The existing control system and the switch installed in the interior for operating the damper control are retained.Technical information:
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .
Note: The picture may differ from the delivered product- Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,682.00 inc VAT -
Gepfeffert V3 KW Coilover VW Mk7 / 7.5 Golf R + 4WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£2,370.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- VW Golf VII 4MOTION
- Audi A3 / S3 8V QUATTRO
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,370.00 – £2,720.00 inc VAT -
-
Gepfeffert V3 KW Coilover VW Mk7 / 7.5 Golf 2WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V2 KW Coilover VW Mk7 / 7.5 Golf 2WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII R
- Audi RS3 8V / TTRS
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V1 KW Coilover VW Mk7 / 7.5 Golf with camber adjustable top mounts 2WD
Shop by Product Type, Suspension, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert VW ID.Buzz Cargo KW V3 Coilover 45-100mm
Shop by Product Type, KW Gepfeffert Coilover Suspension, ID. BuzzNew developed KW V3 Gepfeffert coilover for the ID.Buzz giving additional lowering range 45-100mm. Special order item terms and conditions apply , custom made to order items at KW for Gepfeffert which take 6-8 weeks for delivery.£2,995.00 inc VATGepfeffert KW Coilover suspension for VW ID.Buzz, for use with original top mounts. This version offers more lowering range than the normal KW version and is avialable for 2WD models and 4Wd models with a specific rear spring. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,995.00 inc VAT -
Sale
Gepfeffert KW DDC Plug and Play Coilovers VW Golf Mk8 35-70mm
Volkswagen, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert CoiloverGepfeffert KW Coilover suspension for Golf Mk8 GTI GTE R 2WD + 4Wd Ø 55mm chassis, for use with original top mounts and retaining DDC Plug and Play function. This version offers more lowering range than the normal KW version. More Mk8 Golf Gepfeffert versions available enquire [email protected]£2,682.00 inc VATGepfeffert DDC without adjustable camber dome bearings
The gepfeffert DDC without adjustable camber dome bearings is mounted with the standard support bearings. We refer to the gepfeffert chassis without camber dome bearings as the "small depth version". Definition "small depth version": We distinguish here coilovers of the brand gepfeffert.com made by KW, with or without adjustable camber dome bearings (model & platform dependent). The suspensions without camber dome bearings have up to 35mm more lowering, compared to a standard KW coilover suspension. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-70mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Individual or maximum lowering
KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a stylish and sporty lowering according to your individual ideas. The adaptive KW coilovers are available as KW DDC Plug & Play variants for vehicle models with electronically controlled standard suspension.More comfort or more sport - you decide
More and more premium vehicles today are equipped with an adaptive suspension system. Until the market launch of KW DDC Plug & Play, you often had to compromise on an individual desired lowering and often even do without your extra paid active control systems and comfort features. In contrast, with the adaptive KW DDC Plug & Play coilovers, you are free of compromises and can combine the control of your standard damper system with a stepless lowering and the driving dynamics of a KW coilover suspension.The gepfeffert.com® DDC Plug & Play coilover suspension made by KW
During installation, the standard struts are simply replaced with the KW struts manufactured in stainless steel technology "inox-line" and the adaptive KW dampers are connected to the standard on-board electronics using the original connectors from your car manufacturer. No further assembly steps are necessary with the KW DDC Plug & Play coilovers. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover suspension. The existing control system and the switch installed in the interior for operating the damper control are retained.Technical information:
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .
Note: The picture may differ from the delivered product- Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,682.00 inc VAT -
Sale
Gepfeffert KW DDC Plug and Play Coilovers Audi S3 / RS3 8Y ( GY) 35-70mm
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert SuspensionGepfeffert KW Coilover suspension for Audi S3 and RS3 8Y chassis, for use with original top mounts and retaining DDC Plug and Play function. This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .£2,682.00 inc VAT£2,682.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. £725.00 – £875.00 inc VAT -
£275.00 inc VAT -
Gepfeffert / KW Porsche 993 C2 C4 V3 Coilovers
KW Gepfeffert Coilover Suspension, Gepfeffert KW Coilover Suspension Porsche£3,033.00 – £5,280.00 inc VAT
Fits:
Porsche 993 C2 C4 10/1993>>
Normal version Lowers car by: F 20-40mm / R 10-30mm
Gepfeffert Version : FT 40-90mm / R 40-90mm
Gepfeffert Clubsport Version : FT 40-100mm / R 40-100mm
• Independently adjustable damping technology -rebound and compression damping
• inox-line stainless steel technology at no extra charge
• Individual height adjustment
• German TUV-tested adjustment parameters
• High-quality components for long life
• Comprehensive documentation for ease of use
• Infinitely adjustable rebound damping
• 14- level adjustable compression damping
• Unique, independently functioning damping power adjustment
Variant 3 race technology for the road with adjustable compression and rebound damping. The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. £3,033.00 – £5,280.00 inc VAT -
Gepfeffert GFW V3 Audi RSQ3 Typ 8U/F3 With camber adjustable top mount (60-110mm)
Shop by Car, Audi, Q3 / RSQ3, KW Gepfeffert Coilover Suspension£2,420.00 – £2,878.99 inc VATKW low Coilover suspension with hardness adjustment and support bearings from gepfeffert.com (by KW).
Adjustment range: 60-110mm lowering
V3: adjustable compression and rebound
Clamp diameter: 55mm
Suitable for the following models:
Audi RSQ3 (8U) 2013-2016 *
Audi RSQ3 (F3) from 2019
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.
Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,420.00 – £2,878.99 inc VAT -
H&R Drop Links
Coilover Suspension Parts305mm Drop Links specifically for H&R deep applications. Priced individually. 140/160mm Deep strut require part number : PS28851VAA01-K Applications : Golf V + VI + VII and similar 150mm - 330mm Universal Drop Links ( with adjustable link rod lengths ) Priced per pair : PS29480VAA02 Applications : All VAG, M10 x 1,25 Div.£45.00 – £57.50 inc VAT£45.00 – £57.50 inc VAT -
mbDESIGN – SF1 Forged
mbDESIGN Wheels£630.00 – £805.00 inc VATThe SF1 forged wheel is available from 19" to 24 inches. Bolt pcd patterns 5x100 to 5x132 as well as centre lock for Porsche vehicles and are TÜV tested.
A special feature is the application for the Porsche 992 with exactly the same dimensions and offset as the standard wheel.
Multiple colour finishes and custom finishes. Price per wheel. All wheels are made to order and built on an individual basis so please contact us for a lead time. Available for Audi , Volkswagen , BMW, Mercedes- Benz, Porsche If you are unsure of the fitment for your vehicle, or don't see a size and fitment listed for your vehicle please contact us [email protected]£630.00 – £805.00 inc VAT -
£POA -
£POA -
H&R Deep Coilover Hyundai i30N inc. Performance, Typ PDE Lowering F: 30-60mm / R: 25-65mm
Shop by Product Type, Suspension, Shop by Car, Hyundai, H&R CoiloversH&R Deep suspension are a performance low version of the monotube coilover enabling more lowering than normal versions for that ultra low stance, without sacrificing ride quality, handling or performance, the height adjustable coilovers can be set to you desired height for the perfect wheel fitment.£1,616.79 – £1,884.99 inc VAT£1,616.79 – £1,884.99 inc VAT -
Sold out
SRS-Tec Rear Spoiler GT-R, Porsche 993
SRS-Tec£1,260.00 inc VATDescription
Manufacturer SRS-Tec Article Rear spoiler GT-R Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Version: all (not for Convertible) Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The rear spoiler is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
At the original mounting points, no modifications necessaryIncluded
SRS-Tec Rear spoiler GT-R (unpainted) – Installation instructions£1,260.00 inc VAT -
Sold out
SRS-Tec Front Bumper GTS, Porsche 993
SRS-TecManufacturer SRS-Tec Article Front bumper GTS Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Submodell: All Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.£979.00 inc VATDetails
Special feature The black aluminum grating is screwed together with the front bumper and part of the delivery. The bumper is very easy paintable, has a excellent quality and a perfect fitment. Notice The front indicators are part of the delivery Material High quality german glass fibre reinforced plastic (GRP) Product copyright Our products and our design are world-wide patented!Assembly Instructions
Like the OEM bumper, no modifications necessaryIncluded
SRS-Tec Front bumper GTS (unpainted) – SRS-Tec 3D-Logo – Front indicators – Black aluminum grating – Mounting material Please contact us for a shipping quote and delivery timescale [email protected]£979.00 inc VAT -
Sold out
SRS-Tec Rear Spoiler GT2-Look, Porsche 993
Porsche, SRS-Tec£729.99 inc VATDescription
Manufacturer SRS-Tec Article Rear spoiler GT2-Look Area of Use Vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Submodell: All (except Convertible) Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The rear spoiler is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
At the original mounting points, no modifications necessaryIncluded
SRS-Tec Rear spoiler GT2-Look (unpainted) Notice The air outlet is not part of the delivery Please contact us for a shipping quote and delivery timescale [email protected]£729.99 inc VAT -
Sold out
SRS-Tec Front Bumper GT3-Style, Porsche 986
SRS-Tec£539.99 inc VATDescription
Manufacturer SRS-Tec Article Front bumper GT3-Style Area of use Make: Porsche Modell: Boxster Type: 986 Model Year: 1996 – 11/2004 Submodell: All Engine: AllDetails
Special feature The bumper is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessaryIncluded
SRS-Tec Front bumper GT3-Style (unpainted) Please contact us for a shipping quote and delivery timescale [email protected]£539.99 inc VAT -
Sold out
SRS-Tec Front Bumper GT3 RS-Style, Porsche 986
SRS-Tec£539.99 inc VATDescription
Manufacturer SRS-Tec Article Front bumper GT3 RS-Style Area of use Make: Porsche Modell: Boxster Type: 986 Model Year: 1996 – 11/2004 Submodell: All Engine: AllDetails
Special feature The bumper is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessaryIncluded
SRS-Tec Front bumper GT3 RS-Style (unpainted) Please contact us for a shipping quote [email protected]£539.99 inc VAT -
Sold out
SRS-Tec Front Bumper GT3-Style, Porsche 996
SRS-Tec£539.99 inc VATDescription
Manufacturer SRS-Tec Article Front bumper GT3-Style Area of Use vehicle manufacturer: Porsche Model: 911 Type: 996 Model Year: 2003 – 2006 Submodell: All Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The bumper is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessaryIncluded
SRS-Tec Front bumper GT3-Style (unpainted) Please contact us for a shipping quote [email protected]£539.99 inc VAT -
Sold out
SRS-Tec Over Wings GT2-Look, Porsche 993
SRS-Tec£559.99 inc VATDescription
Manufacturer SRS-Tec Article Over Fenders GT2-Look Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Submodell: All Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The over fenders are very easy paintable, have a excellent quality and a perfect fitment. Notice All 4 over fenders are part of the delivery Individual parts available on request Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued and bolted to the fendersIncluded
SRS-Tec front over fenders GT2-Look left / right (unpainted) – SRS-Tec rear over fenders GT2-Look left / right (unpainted) Please contact us for a shipping quote [email protected]£559.99 inc VAT -
Sold out
SRS-Tec Front Bumper GT3 RS-Style, Porsche 996
SRS-Tec£539.99 inc VATDescription
Manufacturer SRS-Tec Article Front bumper GT3 RS-StyleArea of Use vehicle manufacturer: Porsche Model: 911 Type: 996 Model Year: 2003 – 2006 Submodell: All Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The bumper is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessaryIncluded
SRS-Tec Front bumper GT3 RS-Style (unpainted) Please contact us for a shipping quote [email protected]£539.99 inc VAT -
£489.99 inc VAT -
£519.99 inc VAT -
£519.99 inc VAT -
SRS-Tec Wide Wings GT, Mercedes CLA (C117)
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Mercedes-Benz Modell: CLA Type: C117 Model Year: 01/2013 – 05/2018 Submodell: All Engine: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, VW Passat B7
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Passat Type: B7 (3C) Model Year: 10/2010 – 10/2014 Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders. No modifications required, direct fits.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£519.99 inc VAT -
£519.99 inc VAT -
£519.99 inc VAT -
SRS-Tec Wide Wings GT, AUDI A4 B8
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: AUDI Modell: A4 Type: B8 (8K) Model Year: 12/2007 – 11/2011 Submodell: All Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Installation material – Installation instructions All wings are made to order and take approx 4 weeks to arrive from date of order, these are classed as special order items for which conditions apply.£519.99 inc VAT -
SRS-Tec Wheel Arch Flares, Land Rover Defender
SRS-Tec£499.99 inc VATDescription
Manufacturer SRS-Tec Article Wheel arches Area of use Make: Land Rover Modell: Defender Model Year: 1990 – 2016 Submodell: AllProduct Details
Note: The fender flares replace the original parts and are mounted to the original mounting points. The black plastic corner pieces on the vehicle in the pictures are not included in the delivery and were added later by the customer. Notice The wide Wheel arches replace the original parts, are very easy paintable, have a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM parts no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec wide wheel arches front & rear (unpainted) – TÜV report (in preparation) – Installation instructions£499.99 inc VAT -
£519.99 inc VAT -
SRS-Tec Wide Wings GT, Audi TT 8J
TT / TTS/ TTRS, SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: AUDI Modell: TT Type: 8J Model Year: 04/2006 – 03/2014 Submodell: Roadster & Coupe Engine: AllDetails
Notice 3cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec Wide Wings GT, A-Class (W176)
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of Use vehicle manufacturer: Mercedes-Benz Model: A-Class Type: W176 Model Year: from 09/2012 – Design: AllDetails
Notice 2,5cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec 2cm Wider Wings GT, BMW E46 Facelift
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: BMW Modell: 3er Type: E46 Facelift Model Year: 09/2001 – 2007 Submodell: Sedan, Station Wagon Engine: AllDetails
Notice 2cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
Sold out
SRS-Tec Front Spoiler GT-R, Porsche 993
SRS-Tec£479.99 inc VATDescription
Manufacturer SRS-Tec Article Front spoiler GT-R Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Submodell: All (except Convertible) Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature Front spoiler for the original Porsche Turbo front bumper. Did not fit on the standard front bumper. Very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the front bumper, no modifications necessaryIncluded
SRS-Tec Front spoiler GT-R (unpainted) – Mounting material – Installation instructions Please contact us for a shipping quote [email protected]£479.99 inc VAT -
SRS-Tec 2cm Wider Wings GT, VW Polo 6R
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Volkswagen Modell: Polo V Type: 6R Model Year: 03/2009 – 03/2014 Submodell: All Engine: AllDetails
Notice 2cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£519.99 inc VAT -
SRS-Tec Wide Wings GT Clean, AUDI A3 Sportback 8PA
SRS-TecManufacturer SRS-Tec GT fenders (left & right ) Clean version , without cutouts for side indicators Application area : Vehicle manufacturer: AUDI; Vehicle model: A3; Type: 8P / 8PA; Model year: 03/2003 – 06/2008; Version: 3-door, 5-door, Sportback£519.99 inc VAT£519.99 inc VAT -
SRS-Tec Wide Wings GT, AUDI A3 Sportback 8PA
SRS-Tec£519.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of use Make: AUDI Modell: A3 Type: 8P / 8PA Model Year: 03/2003 – 06/2008 Submodell: 3-door, 5-door, Sportback Engine: AllDetails
Notice 3cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Fit also at the S3 8P Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Installation instructions£519.99 inc VAT -
SRS-Tec Wide Wings Clean GT, AUDI TT 8N
SRS-Tec£509.99 inc VATDescription
Article Wide fender set GT (left & right) Manufacturer SRS-Tec Version Clean, without cut outs for the oem indicators Area of use Make: AUDI Modell: TT Type: 8N Model Year: 1998 – 2006 Submodell: All Engine: AllDetails
Notice 2,5cm wider per side then the stock fenders, this set allows for much wider lower profile to the car. Fenders can be mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set clean GT left & right (unpainted) – TÜV report – Installation material – Installation instructions£509.99 inc VAT -
SRS-Tec 2cm Wider Wing GT, Audi A1 8X
SRS-Tec£489.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: Audi Modell: A1 Type: 8X Model Year: from 05/2010 – 05/2018 Submodell: All Engine: AllDetails
Notice 2cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£489.99 inc VAT -
Sold out
SRS-Tec Side Skirts GT-R, Porsche 993
SRS-Tec£354.99 inc VATDescription
Manufacturer SRS-Tec Article Side skirts GT-R Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Version: all (except Convertible) Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The side skirts are very easy paintable, have a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolt and gluingIncluded
SRS-Tec Side skirts GT-R left / right (unpainted) – Mounting material – Mounting instructions Please contact us for a shipping quote [email protected]£354.99 inc VAT -
SRS-Tec Wide Front Wing GT Clean, VW Bora
SRS-Tec£489.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Version Clean, without cut outs for the indicators Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: AllDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fendersIncluded
SRS-Tec front Fender GT Clean left & right (unpainted) – TÜV report – Fitting material – Fitting instructions All SRS Products take approx 5-6 weeks to be delivered. There is no express option this is the only shipping method we can offer for these size parts.£489.99 inc VAT -
SRS-Tec Wide Front Wing GT Clean, VW Golf 4
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-TecSRS-Tec Article Wide fender set GT (left & right) Version Clean, without cut outs for the indicators Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2006 Submodell: All£499.99 inc VATDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fendersIncluded
SRS-Tec front Fender GT Clean left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£499.99 inc VAT -
Sold out
SRS-Tec Front Spoiler GT2-Look Porsche 993
SRS-Tec£414.99 inc VATDescription
Manufacturer SRS-Tec Article Front spoiler GT2-Look Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Submodell: All Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature The front spoiler is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Screwing and gluing on the OEM front bumper, no modifications necessaryIncluded
SRS-Tec Front spoiler GT2-Look (unpainted) please contact us for a shipping quote [email protected]£414.99 inc VAT -
£430.00 inc VAT -
SRS-Tec Rear Valance G5-R32 Duplex, VW Golf V
SRS-Tec£299.99 inc VATDescription
Manufacturer SRS-Tec Article Rear valance G5-R32 Version Duplex exhaust cut-out for the Golf MK5 R32 exhaust Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice One piece rear valance including the diffuser Expert’s report German TÜV report Material High quality German glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM part. Comes ready to prep, prime and paint.Included
SRS-Tec Rear valance G5-R32 (unpainted) – TÜV report – Fitting material Items on back order are special order items made to order * special order item terms and conditions apply *£299.99 inc VAT -
SRS-Tec Rear Valance G5-R32 Clean, ( No Exhaust Cutout ) VW Golf V
SRS-Tec£299.99 inc VATDescription
Manufacturer SRS-Tec Article Rear valance G5-R32 Version Clean, no exhaust cut-out Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice One piece rear valance including the diffuser Expert’s report German TÜV report Material High quality German glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM part. Comes ready to prep, prime and paint.Included
SRS-Tec Rear valance G5-R32 Clean (unpainted) – TÜV report – Fitting material£299.99 inc VAT -
SRS-Tec Rear Valance G5-R32, ( Single Exhaust Cutout ) VW Golf V
SRS-Tec£299.99 inc VATDescription
Manufacturer SRS-Tec Article Rear valance G5-R32 Version Single exhaust cut-out left Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice One piece rear valance including the diffuser Expert’s report German TÜV report Material High quality German glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM part. Comes ready to prep, prime and paint.Included
SRS-Tec Rear valance G5-R32 (unpainted) – Tow hook cover – TÜV report – Fitting material Items on back order are special order items made to order *special order terms and conditions apply *£299.99 inc VAT -
SRS-Tec Rear Valance ED30-Style, VW Golf V
SRS-TecDescription Rear Diffuser G5-R32 SRS-Tec Article Rear valance ED30-Style Version Single exhaust cut-out left Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)£299.99 inc VATDetails
Expert’s report German TÜV report Material High quality German glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM part. Comes ready to prep, prime and paint.Included
SRS-Tec Rear valance ED30-Style (unpainted) – Tow hook cover – TÜV report – Fitting material – Mounting instructions Back order items are made to order * special order terms and conditions apply *£299.99 inc VAT -
SRS Rear Diffuser GT-R, Porsche 993
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GT-R Area of Use vehicle manufacturer: Porsche Model: 911 Type: 993 Model Year: 1993 – 1998 Version: all (except Convertible) Notice The Porsche brand and its type names are registered trademarks and property of Dr.Ing.h.c.F.Porsche AG.Details
Special feature 3 piece rear diffuser for the original rear bumper. Very easy paintable, has a excellent quality and a perfect fitment. Fit only in combination with the original Porsche 993 Carrera S / Carrera 4S rear bumper! Expert’s report TÜV report according to German §19.3 StVZO (in preperation) Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the rear bumper, no modifications necessaryIncluded
SRS-Tec Rear diffuser GT-R (unpainted) – Mounting material – Installation instructions Please contact us for a shipping quote as these items are large and require special shipping conditions quoted on an individual basis. Items on back order are special order items made to order . *special order terms and conditions apply *£249.99 inc VAT -
SRS Rear Diffuser GTR, VW Golf VI ( For Mk6 R Bumper only )
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GTR Version cut-out for GTI exhaust Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the standard Golf 6 R20 rear bumper in combination with the GTI / GTD exhaust. Not for GTI/GTD bumper Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the VW Golf VI R20 rear bumper. No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser GTR (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Rear Diffuser GT, VW Golf VI
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GT Version Single exhaust cut-out left Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon)Details
Notice Only for the standart Golf 6 rear bumper, not for GTI/GTD/R bumper Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the OEM rear bumper and bolted. No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser GT (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Rear Diffuser GT Clean, VW Golf VI ( For standard mk6 bumper only not Gti Gtd )
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear diffuser GT Version Clean, no exhaust cut-out Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon)Details
Notice Only for the standart Golf 6 rear bumper, not for GTI/GTD/R bumper Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the OEM rear bumper and bolted. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser GT Clean (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Roof Spoiler, VW Golf VI ( For standard tailgate not Gti / Gtd )
SRS-Tec£229.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the standart Golf 6 tailgate, not for GTI/GTD/R Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the tailgate. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler (unpainted) – TÜV report – Fitting material£229.99 inc VAT -
SRS Rear Diffuser Flaps R20, VW Golf VI ( For mk6 R Bumper only )
SRS-Tec£249.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser Flaps R20 Version Flaps for the OEM R20 rear diffuser Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 – 12/2012 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the OEM VW Golf 6 R20 rear diffuser Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the VW Golf VI R20 rear diffuser. No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser flaps R20 (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Front Wing Left + Right S2, VW Golf 4
SRS-TecManufacturer SRS-Tec Article fender S2 left + right Area of application Vehicle manufacturer: VW Vehicle model: Golf 4 Type: 1J Model year: 1997 – 2006 Version: all£489.99 inc VATProduct details
Vehicle-specific TÜV report according to StVZO §19.2 Material: High-quality, glass-fiber reinforced composite material Product protection Our products are protected by patents worldwideAssembly
Like the original fender, no modifications requiredScope of delivery
– SRS-Tec fender S2 left + right (unpainted) – TÜV certificate – Installation instructions Delivery in estimated 5 weeks from date of order.£489.99 inc VAT -
SRS Rear Diffuser G5-R32 Duplex, VW Golf V
SRS-Tec£199.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser G5-R32 Version Duplex Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice The rear diffuser is only for the OEM VW Golf V R32 rear valance. To mount this item you also need to buy the OEM VW R32 rear valance from VW. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM partIncluded
SRS-Tec Rear Diffuser G5-R32 duplex (unpainted) – TÜV report – Fitting material£199.99 inc VAT -
SRS Rear Diffuser G5-R32, VW Golf V
SRS-Tec£199.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser G5-R32 Version Exhaust left Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice The rear diffuser is only for the OEM VW Golf V R32 rear valance. To mount this item you also need to buy the OEM VW R32 rear valance from VW. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM partIncluded
SRS-Tec Rear Diffuser G5-R32 (unpainted) – TÜV report – Fitting material£199.99 inc VAT -
SRS Rear Diffuser G5-R32 Clean, VW Golf V
SRS-Tec£199.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser G5-R32 Version Clean Area of Use Vehicle manufacturer: VW Modell: Golf Type: 1K (MK5) Model Year: 2003 – 2009 Submodell: All (no station wagon)Details
Notice The rear diffuser is only for the OEM VW Golf V R32 rear valance. To mount this item you also need to buy the OEM VW R32 rear valance from VW. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM partIncluded
SRS-Tec Rear Diffuser G5-R32 clean (unpainted) – TÜV report – Fitting material£199.99 inc VAT -
SRS Front Flaps GT-I, Facelift GTI, VW Golf VII
SRS-Tec£149.99 inc VATDescription
Manufacturer SRS-Tec Article Front flaps GT-I Version For the VW Golf 7 GTI / GTD front bumper Area of use Make: Volkswagen Modell: Golf Type: AU (MK7.5) Model Year: from 02/2017 – 12/2019 Submodell: All Engine: AllDetails
Notice Only for the OEM VW GTI / GTD front bumper For VW Golf Mk7 and Mk7.5 Expert’s report TÜV report according to German §19.3 StVZO Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued and bolted to the OEM GTI / GTD front bumper. Comes ready to prep, prime and paint.Included
SRS-Tec front flaps GT-I left/right (unpainted) – TÜV report – Fitting instructions£149.99 inc VAT -
SRS Roof Spoiler Addon GT, VW Scirocco 3
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT Version For VW standard roof spoiler (not for R Spoiler) Area of use Make: Volkswagen Modell: Scirocco 3 Type: 13 Model Year: from 08/2008 Engine: AllDetails
Notice Only for the VW Scirocco standard roof spoiler. Does not fit on the Scirocco R roof spoiler. Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Roof Spoiler Addon GT/S, VW Golf VII
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT/S Version For VW roof spoiler with side panels Area of use Make: Volkswagen Modell: Golf Type: AU (MK7) Model Year: from 08/2012 – 12/2019 Submodell: 2-Door / 4-Door (not for Station Wagon) Engine: AllDetails
Notice Only for the VW Golf 7 GTI / GTD / R Roof Spoiler with side panels TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW MK7 Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT/S (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Roof Spoiler Addon GT, VW Golf VII
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler Addon GT Version For VW roof spoiler without side panels Area of use Make: Volkswagen Modell: Golf Type: AU (MK7) Model Year: from 08/2012 – 12/2019 Submodell: 2-Door / 4-Door (not for Station Wagon) Engine: AllDetails
Notice Only for the VW Golf 7 Roof Spoiler without side panels TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the VW MK7 Roof Spoiler. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler Addon GT (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Roof Spoiler RS, Seat Leon 1P
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler RS Area of use Make: Seat Modell: Leon Type: 1P Facelift Model Year: from 05/2009 Engine: AllDetails
Notice Only for the Seat Leon 1P facelift tailgate Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the Tailgate. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler RS (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Rear Spoiler GT, VW Bora
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Rear spoiler GT Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Ausführung: LimousineDetails
Special feature The spoiler is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.3 StVZO Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the trunk, no modifications necessaryIncluded
SRS-Tec Rear spoiler GT (unpainted) – TÜV report – Mounting material£179.99 inc VAT -
SRS Roof Spoiler RS, Seat Leon 5F
SRS-Tec£179.99 inc VATDescription
Manufacturer SRS-Tec Article Roof Spoiler RS Area of use Make: Seat Modell: Leon III Type: 5F Model Year: from 2012 – 2020 Engine: AllDetails
Notice Only for 4-door Sedan, not for Station Wagon. Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Gluing to the Tailgate. Comes ready to prep, prime and paint.Included
SRS-Tec Roof Spoiler RS (unpainted) – TÜV report – Fitting material£179.99 inc VAT -
SRS Front Bumper Grille Set GT, VW Golf VI
SRS-Tec£185.00 inc VATAvailable to order in 3-4 weeks
Description
Manufacturer SRS-Tec Article Front bumper grille set GT Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 – 2012 Submodell: All Engine: All Article The grille set fit to the VW Golf 6 GTI / GTD Front bumperDetails
Notice Fit only to the VW Golf 6 GTI / GTD Front bumper and replaces the fog lights Expert’s report TÜV report according to German §19.3 StVZO (in preperation!) Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the Front bumper. Small modifications to the Front bumper required. Comes ready to prep, prime and paint.Included
SRS-Tec Front bumper grille set GT (unpainted) – Fitting instructions – Mounting material£185.00 inc VAT -
SRS Front Lip R20, VW Golf VI
SRS-Tec£169.99 inc VATDescription
Manufacturer SRS-Tec Article Front sword R20 Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK5) Model Year: from 10/2008 Submodell: all Notice Only for the original VW Golf VI R20 Front bumper.Details
Notice Only for the original VW Golf VI R20 Front bumper. Expert’s report TÜV report according to German §19.3 StVZO §19.3 StVZO Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the OEM Front bumper. No Modifications requiredIncluded
SRS-Tec Front sword R20 (unpainted) – TÜV report – Mounting material – Assembly Instructions£169.99 inc VAT -
SRS Front Lip R-Line, VW Golf VI
SRS-Tec£169.99 inc VATDescription
Manufacturer SRS-Tec Article Front sword R-Line Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: All Engine: All Notice Only for the original VW Golf VI R-Line Front bumper.Details
Notice Only for the original VW front bumper R-Line Expert’s report TÜV report according to German §19.3 StVZO Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the OEM Front bumperIncluded
SRS-Tec Front sword R-Line (unpainted) – TÜV report – Fitting material£169.99 inc VAT -
£159.99 inc VAT -
SRS Rear Diffuser RS-Style Clean, VW Bora
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser RS-Style Version Clean, with no exhaust cut-out Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998/2005 Submodell: All Engine: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser RS-Style clean (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
£159.99 inc VAT -
SRS Rear Diffuser R-Style Clean, VW Bora
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version Clean, with no exhaust cut-out Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: All Engine: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style clean (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
SRS Rear Diffuser R-Style, VW Bora
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version Single exhaust cut-out on the driver’s side Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: All Engine: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style exhaust left (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
SRS Rear Diffuser R-Style V6, VW Golf IV
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version V6 Exhaust Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2003 Submodell: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the V6 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style V6 (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
SRS Rear Diffuser R-Style Duplex, VW Golf IV
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version Duplex exhaust cut-out left & right Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2003 Submodell: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style duplex (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
SRS Rear Diffuser RS-Style R32, VW Golf IV
SRS-Tec£159.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser RS-Style Version R32 exhaust Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2003 Submodell: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the R32 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser RS-Style R32 (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
£159.99 inc VAT -
£159.99 inc VAT -
SRS Rear Diffuser R-Style, VW Golf IV
SRS-Tec£120.00 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version Single exhaust cut-out left Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2003 Submodell: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style exhaust left (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£120.00 inc VAT -
SRS Rear Diffuser R-Style R32, VW Golf IV
SRS-Tec£160.00 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version R32 exhaust Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2003 Submodell: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the R32 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material High quality german glass fibre reinforced plastic (GRP)Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style R32 (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£160.00 inc VAT -
£POA -
£POA -
£1,149.00 – £1,949.00 inc VAT -
£1,199.00 – £1,599.00 inc VAT -
Sold out
mbDESIGN – MF1
mbDESIGN Wheels£1,849.00 – £4,200.00 inc VATThe mbDESIGN MF1 wheel is a forged magnesium wheel that is well known for racing.
A special forging technology of the mbDESIGN magnesium rims brings numerous advantages. Made from the high-tech material magnesium, wheels combine maximum stability with minimum weight. They are up to 30 percent lighter than conventional cast aluminum wheels. So the filigree MF1 wheel in the dimension 8.0 × 19 inches ET50 weighs just 7.15 kg - with a carrying capacity of 580 kg, this weight is record-breaking. The wheels are not suitable for extreme winter operation and should therefore only be driven in summer. When cleaning, you have to pay nothing and maintain the magnesium wheel like an aluminum rim. However, as with an aluminum wheel, acidic rim cleaners should be avoided. The low weight of the forged magnesium rims leads to a reduction of the unsprung mass, resulting in noticeably improved driving dynamics and a smoother running behavior of the entire vehicle. In addition, the fuel consumption and CO2 emissions of the vehicles are reduced, with E-cars, the range thus increases. The Forged Magnesium rims by mbDESIGN are offered cheaper than some aluminum forged wheels. The reason for this is a new type of fully automated production geared towards high-speed and mass production. The forged magnesium rim MF1 in 8.0 × 19 inches is TÜV tested and is even offered ABE. This is the case with no other manufacturer.£1,849.00 – £4,200.00 inc VAT -
£749.00 – £1,349.00 inc VAT -
£1,299.00 – £2,049.00 inc VAT -
£2,449.00 inc VAT -
£1,549.00 – £2,449.00 inc VAT -
£899.00 – £2,880.00 inc VAT -
£1,249.00 – £2,049.00 inc VAT -
£2,399.00 – £3,049.00 inc VAT -
£2,099.00 – £2,699.00 inc VAT -
£1,399.00 – £2,949.00 inc VAT -
£1,249.00 – £2,999.00 inc VAT -
StillStatic #GotTheDrop “The Script” Zipped Hoodie
Shop by Product Type, Stillstatic Merchandise£44.95 inc VAT£44.95 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 997 Turbo 4WD deep : incl. drop links
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,830.00 – £3,590.00 inc VAT£2,830.00 – £3,590.00 inc VAT -
Set of 4 wheels MB Design Turbo S Grey Polished 9×19″ et42 5/112 57.1
Shop by Product Type, Wheels, Ispiri WheelsA lightweight flow form wheel manufactured using mb design technology made in germany with tub approval.£1,850.00 inc VAT£1,850.00 inc VAT -
Sold out
B5 S4/RS4 Twin Rear caliper adapters for fitting R8 4 pot caliper , R8 handbrake caliper with 356mm disc ( not inc ).
Shop by Product Type, Suspension, Shop by Car, Brake AdaptionThe kit includes steel brackets for main brake caliper and handbrake caliper, fitting bolts, handbrake caliper relocation adapter for brake line, new brake lines. You will need R8 4 pot caliper and R8 handbrake caliper with R8 disc these are not included. These items are made to order Please contact us for a manufacturing timescale at [email protected]£620.00 inc VAT£620.00 inc VAT -
Muecke VW MK7 Golf 7 widened wings 3cm Full Carbon
Muecke-Carbon & Bodywork Parts ( Wider Wings )£1,550.00 inc VAT- 1 set left & right 3cm per side widened wings made of full carbon fibre, suitable for the original bumper.
- Finish is clear gloss laqered ( no paint blend like in picture this can be carried out custom to your car ).
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£1,550.00 inc VAT -
Muecke VW Polo 6 (AW) widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set VW Polo 6 (AW) fender GFK 2.5 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
H&R RSS Clubsport Coilover Kit adjustable damping for BMW 3 Series E30 M3, Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, M Series, RSS Race Coilover Suspension[embed]https://youtu.be/wMG5GhVIR5M[/embed]£2,335.00 inc VAT£2,335.00 inc VAT -
H&R RSS Clubsport Coilover Kit fixed damping for BMW 3 Series E30 M3, Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, M Series, RSS Race Coilover Suspension[embed]https://youtu.be/wMG5GhVIR5M[/embed]£1,635.00 inc VAT£1,635.00 inc VAT -
Muecke Audi RS4 B5 Full Carbon Overlay Wings ( carbon over GRP – Fibreglass )
Muecke-Carbon & Bodywork Parts ( Wider Wings )Muecke Carbon custom carbon wings made for the B5 RS4, these wings are supplied as a pair, ready to fit with gloss clear coat finish. If you need fitting for these parts please contact us. Special order parts are made to order please contact us for a timescale.£1,650.00 inc VAT£1,650.00 inc VAT -
H&R Deep Coilover Kit for VW Passat R36 Estate: 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£1,251.00 inc VAT£1,251.00 inc VAT -
H&R Deep Coilover Kit for VW Passat 3B/3BG 4WD: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£1,579.00 inc VAT£1,579.00 inc VAT -
H&R Deep Coilover Kit for VW Passat 3BG 2WD Very Low: 70-140
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£1,675.49 inc VAT£1,675.49 inc VAT -
H&R Deep Coilover Kit for VW Passat 3B/3BG 2WD: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£1,514.49 inc VAT£1,514.49 inc VAT -
H&R Deep Coilover Kit for VW Passat 35i Lim + kombi: 90-140 Very Low!
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£1,456.99 inc VAT£1,456.99 inc VAT -
H&R Deep Coilover Kit for VW Passat 32B:
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£2,269.99 inc VAT£2,269.99 inc VAT -
H&R Deep Coilover Kit for VW Passat 32A:
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Passat, H&R Coilovers£2,269.99 inc VAT£2,269.99 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco III Platform: Race fixed damping for oe top mounts 80-140mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R Coilovers£1,613.49 inc VAT£1,613.49 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco III Platform: Race fixed damping inc. modular top mounts 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R Coilovers£2,133.49 inc VAT£2,133.49 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco Fixed damping for oe top mounts 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R CoiloversH&R Race Coilover Kit for VW MK3 Scirocco inc R ( Type 13 ) 08/08> Fixed damping for oe top mounts 60-120mm This kit is supplied with Race linear springs, fixed damping and is designed for use with original top mounts.£1,789.99 inc VATH&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,789.99 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco III: Race inc. hardness adjsut. for oe top mounts 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R Coilovers£2,207.99 inc VAT£2,207.99 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco III: Race inc. modular top mounts + hardness adjust. 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R Coilovers£2,728.49 inc VAT£2,728.49 inc VAT -
H&R Race Coilover Kit for VW MK3 Scirocco III: Race inc. hardness for oe top mounts 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Scirocco / Corrado / Eos, H&R Coilovers£2,207.99 inc VAT£2,207.99 inc VAT -
H&R Race Coilover Kit for VW MK7/7.5 Golf: Race Inc. modular top mounts and hardness for multi link rear 50-110mm
Suspension, H&R Coilover Suspension, H&R Coilovers, Golf 7 / 7.5 / Mk8 H&R Deep Coilover Suspension£2,827.49 inc VAT£2,827.49 inc VAT -
H&R Deep Coilover Kit for Seat Ateca 4WD
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers£1,402.49 inc VAT£1,402.49 inc VAT -
H&R Deep Coilover Kit for VW Golf III Variant 2WD: F:80-120mm R:70-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Golf, Golf Mk1 / Mk2 / Mk3, H&R Coilovers£1,588.99 inc VAT£1,588.99 inc VAT -
H&R Deep Coilover Kit for VW Golf III Variant 2WD: F: 80-120mm R: 70-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Golf, Golf Mk1 / Mk2 / Mk3, H&R Coilovers£1,588.49 inc VAT£1,588.49 inc VAT -
H&R Deep Coilover Kit for VW Polo 6N Platform: 50-110mm up to 9/99
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for VW Polo 6N Platform: 50-110mm from 10/99
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R Coilovers£1,186.99 inc VAT£1,186.99 inc VAT -
H&R Deep Coilover Kit for VW Polo 86C: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R Coilovers£1,390.49 inc VAT£1,390.49 inc VAT -
H&R Deep Coilover Kit for VW Lupo GTI: F: / R: ca. 80 mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Lupo, H&R Coilovers£1,565.99 inc VAT£1,565.99 inc VAT -
H&R Deep Coilover Kit for VW Lupo, NOT GTI, Arosa: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Lupo, H&R Coilovers£1,340.99 inc VAT£1,340.99 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> ( 50mm Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hub diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.£1,695.00 inc VAT£1,695.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 5F Multilink rear MacPherson front Strut 55mm inc. drop Links + Top Mounts 80-140mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£2,337.00 inc VAT£2,337.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 5F: – deep version with R: Multilink und F: MacPherson Strut = 55mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,565.49 inc VAT£1,565.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 5F Multilink Rear MacPherson Strut 50mm inc Drop Links + Top Mounts 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,565.49 inc VAT£1,565.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 5F, Multilink Rear 55mm Hub incl. Drop Links + Top mounts 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,565.49 inc VAT£1,565.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 5F, Multilink Rear 50mm Hub incl. Drop Links + Top mounts 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,565.49 inc VAT£1,565.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1P 4WD 55mm diameter, very deep version: 110-140mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,588.49 inc VAT£1,588.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 1P 4WD 55mm diameter: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,278.99 inc VAT£1,278.99 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1P 50mm diameter F: D: 70-140mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,581.99 inc VAT£1,581.99 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1P Very Low 70-140mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,581.99 inc VAT£1,581.99 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1M, 50mm diameter F: D: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,241.49 inc VAT£1,241.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1P 55mm Hub diameter 50-110mm ( use oe top mount )
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,241.49 inc VAT£1,241.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 1P, 55mm diameter F:: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,241.49 inc VAT£1,241.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Typ 1M, 4WD: 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,578.49 inc VAT£1,578.49 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 1M: F: 60-120mm / R: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,291.99 inc VAT£1,291.99 inc VAT -
H&R Deep Coilover Kit for Seat Leon Type 1M: 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Leon, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,291.99 inc VAT£1,291.99 inc VAT -
H&R Deep Coilover Kit for Seat Arosa : 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, Lupo, Arosa, H&R Coilovers£1,340.99 inc VAT£1,340.99 inc VAT -
H&R Deep Coilover Kit for Seat Leon Cupra R Typ 1P: 60-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers, Seat Leon H&R Deep Coilovers£1,340.99 inc VAT£1,340.99 inc VAT -
H&R Deep Coilover Kit for Seat Ibiza/Cordoba 6K: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Seat, H&R Coilovers£1,186.99 inc VAT£1,186.99 inc VAT -
H&R Deep Coilover Kit for Skoda Roomster — Nur in Verbindung with F: Stabi 33325-1 fahrbar!:
Suspension, H&R Coilover Suspension, Shop by Car, Skoda, H&R Coilovers£1,251.00 inc VAT£1,251.00 inc VAT -
H&R Deep Coilover Kit for Skoda Rapid, 2WD:
Suspension, H&R Coilover Suspension, Shop by Car, Skoda, H&R Coilovers£1,180.99 inc VAT£1,180.99 inc VAT -
H&R Deep 110mm Coilover Kit for Skoda Octavia Typ 1Z 4WD 55mm diameter
Suspension, H&R Coilovers, Skoda Octavia H&R Deep Suspension£1,749.99 inc VATH&R Deep Coilover for Skoda Octavia Type 1Z with 55mm front hub 4WD for models from 04/04>Lowering is 50-110mm and uses original top mounts and drop links H&R Deep are monotube dampers with superior comfort while still be lower than ” normal ” versions. This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors. Supplied suspension may differ from image shown, for queries please email [email protected]£1,749.99 inc VAT -
H&R Deep Coilover Kit for Skoda Octavia Type 1U: 60-120mm
Suspension, H&R Coilover Suspension, H&R Coilovers, Skoda Octavia H&R Deep Suspension£1,291.99 inc VAT£1,291.99 inc VAT -
H&R Deep Coilover Kit for Porsche Boxster Typ 986 very deep version: ca.55-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,158.49 inc VAT£2,158.49 inc VAT -
H&R Deep Coilover Kit for Porsche Cayman/ Boxter Typ 987: 40-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,215.00 – £2,485.00 inc VAT£2,215.00 – £2,485.00 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 997 4S deep ( fixed rate damping ).
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep Coilover Kit for Porsche 911 Typ 997 4S deep ( Fixed damping ) new rear drop links included. Lowering front and rear axle by approx 40-90mm.£2,840.00 inc VAT£2,840.00 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 997: 40-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,290.00 inc VATPORSCHE911 (997) | 07/2004-12/2012Deep version of H&R monotube coilover 40-90mm lowering fixed damping.£2,290.00 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Type 996 GT3 with Hardness adjustment
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£4,128.49 inc VAT£4,128.49 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 996 C4, Turbo: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,356.49 inc VAT£2,356.49 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 996 C4, 4S – Sauger: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,356.49 inc VAT£2,356.49 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 996 C2: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,034.49 inc VAT£2,034.49 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Type 993: F: 70-90mm / R: – 70-100mm incl. R: Alu top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£3,124.99 inc VAT£3,124.99 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Type 993: F: 70-90mm / R: – 70-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Monotube "Deep" Version coilover. PORSCHE 911 (993) | 10/1993-09/1997 Fixed damping, For clubsport version please contact [email protected] Lowering F: 70-90mm / R: - 70-100mm£2,610.00 inc VAT£2,610.00 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Type 964 from 01/1991 with 58mm damper rod:
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,450.00 inc VATMonotube Deep coilover suspension
SKU: GFW50580-1SC • Suitable for vehicles up to 12/1990 • Type of approval: with TÜV® certificateFor vehicles with upper pin of the rear shock absorber 58 mm long.
For your vehicle:Lowering front axle from [mm]: 50 • Lowering front axle up to [mm]: 110 • Lowering rear axle from [mm]: 50 • Lowering rear axle up to [mm]: 110( Normal version 40-70mm also available on request )Monotube coilovers are fixed damping set the optimum ride quality by H&R technical engineers.£2,450.00 inc VAT -
H&R Deep Coilover Kit for Porsche 911, 964 from 12/1988 to 12/1990: 50-110mm with 105 mm damper rod
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,450.00 inc VATMonotube Deep coilover suspension
SKU: GFW50580-1SC • Suitable for vehicles up to 12/1990 • Type of approval: with TÜV® certificateFor vehicles with upper pin of the rear shock absorber 105 mm long.
For your vehicle:Lowering front axle from [mm]: 50 • Lowering front axle up to [mm]: 110 • Lowering rear axle from [mm]: 50 • Lowering rear axle up to [mm]: 110( Normal version 40-70mm also available on request )Monotube coilovers are fixed damping set the optimum ride quality by H&R technical engineers.£2,450.00 inc VAT -
H&R Race Coilover Kit for Porsche 924, 944 ,968 vehicle with 20 mm Clamp with steel rear axle only
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep coilover kit for 924/944/968 Fixed damping deep H&R coilover based on RSS race derived coilover. Fixed damping for optimum comfort. Lowering range front : 60-90 rear : 50-80 Fits 20mm front hub clamp Fits vehicles with steel axle only, for alluminium axle choose : RSS-37-827-2/8 Made to order 2-3 weeks. The Product is a version with extreme lowering beyond the H&R standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,639.00 inc VAT£2,639.00 inc VAT -
H&R Race Coilover Kit for Porsche 924, 944 ,968 vehicle with 18 mm Clamp with steel rear axle only
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep coilover kit for 924/944/968 Fixed damping deep H&R coilover based on RSS race derived coilover. Fixed damping for optimum comfort. Lowering range front : 60-90 rear : 50-80 Fits 18mm front hub clamp Fits vehicles with steel axle only, for alluminium axle choose : RSS-37-827-1/6 Made to order 2-3 weeks. The Product is a version with extreme lowering beyond the H&R standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,639.00 inc VAT£2,639.00 inc VAT -
H&R Race Coilover Kit for Porsche 924 , 944, 968 18mm Clamp + with alluminium rear axle only
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep coilover kit for 924/944/968 Fixed damping deep H&R coilover based on RSS race derived coilover. Fixed damping for optimum comfort. Lowering range front : 60-90 rear : 50-80 Fits 18mm front hub clamp Fits vehicles with alluminium rear axle only, for steel axle choose :RSS-37-827-1/7 Made to order 2-3 weeks. The Product is a version with extreme lowering beyond the H&R standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,479.00 inc VAT£2,479.00 inc VAT -
H&R Deep Coilover Kit for Vauxhall Vectra C Lowering please enquire:
Suspension, H&R Coilover Suspension, Shop by Car, Vauxhall, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Vauxhall Astra J GTC F: 80-110 / R: 80-110:
Suspension, H&R Coilover Suspension, Shop by Car, Vauxhall, H&R Coilovers£1,661.00 inc VAT£1,661.00 inc VAT -
H&R Deep Coilover Kit for Vauxhall Astra H F: 65-95 / R: 85-95:
Suspension, H&R Coilover Suspension, Shop by Car, Vauxhall, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Vauxhall Astra G F: 70-95 / R: 80-95:
Suspension, H&R Coilover Suspension, Shop by Car, Vauxhall, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Mercedes Benz C-Kl. W205: Estate lowering please enquire (only use short drop links )
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Mercedes C-Kl. W205 C63 AMG Coupe inkl C63s Coupe 35-60mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Mercedes CLK, W209 200 bis 500er 50-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,922.99 inc VAT£1,922.99 inc VAT -
H&R Deep Coilover Kit for Mercedes E-Class 212 Saloon 2WD, low: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,257.49 inc VAT£2,257.49 inc VAT -
H&R Deep Coilover Kit for Mercedes E-Class 211 + CLS 30-90mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Mercedes C63 AMG Coupe W205:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Mercedes C63 AMG Saloon + Touring W205:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Mercedes W204 Saloon – Very Low with race Springs:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,139.49 inc VAT£2,139.49 inc VAT -
H&R Deep Coilover Kit for Mercedes W204 Saloon – low 40-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,145.99 inc VAT£2,145.99 inc VAT -
H&R Deep Coilover Kit for Mercedes W204 Saloon – low version 50-110mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,145.99 inc VAT£2,145.99 inc VAT -
H&R Deep Coilover Kit for Mercedes W203 Estate 30-90mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,145.99 inc VAT£2,145.99 inc VAT -
H&R Deep Coilover Kit for Mercedes W203 Saloon 30-90mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,145.99 inc VAT£2,145.99 inc VAT -
H&R Deep Coilover Kit for Mercedes E-Klasse Coupe W124C 300CE 6cyl. F: 85 / R: – 60:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,133.49 inc VAT£2,133.49 inc VAT -
H&R Deep Coilover Kit for Mercedes A-Class Type 176 50-90mm:
Suspension, H&R Coilover Suspension, Shop by Car, Mercedes, H&R Coilovers£2,220.49 inc VAT£2,220.49 inc VAT -
H&R Deep Coilover Kit for Mazda 3 MPS Typ BK Low version F: 40-70mm / R: 40-60:
Suspension, H&R Coilover Suspension, Shop by Car, Mazda, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Honda Civic Type EP1 / 2 / 3 with 5 hole fixing F: 90 / R: 80:
Suspension, H&R Coilover Suspension, Shop by Car, Honda, H&R Coilovers£1,774.49 inc VAT£1,774.49 inc VAT -
H&R Deep Coilover Kit for Honda Civic Type R EP3 Special Low 50-110mm race springs:
Suspension, H&R Coilover Suspension, Shop by Car, Honda, H&R Coilovers£1,658.00 inc VAT£1,658.00 inc VAT -
H&R Deep Coilover Kit for Ford Focus RS Typ DYB-RS Modell 2016, 4WD Lowering please enquire:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£2,914.49 inc VAT£2,914.49 inc VAT -
H&R Deep Coilover Kit for Ford Focus RS Typ DA3-RS F: 50-70mm / R: 60-80mm:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£2,158.49 inc VAT£2,158.49 inc VAT -
H&R Deep Coilover Kit for Ford Focus III Saloon ST F: 50-70mm / R: 60-80mm:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Ford Focus III Saloon F: 60-80mm / R: 65-85mm:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£1,898.49 inc VAT£1,898.49 inc VAT -
H&R Deep Coilover Kit for Ford Focus Focus II Saloon ST Typ DA3 ab BJ:2004SA) – 50-90mm / R: – 40-80mm:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Deep Coilover Kit for Ford Escort Inc. Cabrio Typ GAL, ALL, AAL, ABL, AFL 1995 bis 1999 100mm:
Suspension, H&R Coilover Suspension, Shop by Car, Ford, H&R Coilovers£1,588.49 inc VAT£1,588.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series F11: 90 – 100 mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£1,641.49 inc VAT£1,641.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series E61 with Level, lowering upto 110mm.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R CoiloversThe coilover system for the E61 uses monotube front coilovers which are a shorter version of the normal version. For the rear the car keeps the original air springs / bags uses new dampers and lowering links to lower the rear which are supplied with the kit.£1,811.49 inc VAT£1,811.49 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E46 – 6 Cyl. 2WD: 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,972.49 inc VAT£1,972.49 inc VAT -
H&R Deep Coilover BMW 1er M135i 4WD, F20 / F21 40-100mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 1 Series, H&R CoiloversH&R Deep Coilover BMW 1er M135i 4WD, F20 / F21 40-100mm 50-100mm Lowering Fixed damping monotube coilover GFW51895-6SC£2,049.00 inc VAT£2,049.00 inc VAT -
H&R Deep Coilover Kit for Audi Q2 Quattro 4WD:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Q2, H&R Coilovers£2,505.49 inc VAT£2,505.49 inc VAT -
H&R Deep Coilover Kit for Audi Q2 Quattro 4WD: 70-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Q2, H&R Coilovers£2,257.49 inc VAT£2,257.49 inc VAT -
H&R Deep Coilover Kit for A4 B7/8E Quattro with race springs R: (Rear):
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,513.99 inc VAT£1,513.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 89 ( B3 ) 2WD Coupe Saloon
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – AUDI 80 Type 89 2WD models only To fit : Coupe, Saloon, 10/86> ( For Cabrio / Coupe models 91 / 02 > please send us an enquiry ) For 4WD 89Q models please check GFW50503-5 / GFW50503-5-14 This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] lowering of between 70mm - 120mm is possible.£1,899.99 inc VAT£1,899.99 inc VAT -
Velour Luxe Tailored Mats
Shop by Product Type, Accessories, Stillstatic Merchandise£89.99 – £94.99 inc VAT£89.99 – £94.99 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series E60 Saloon These are only 4 shortened dampers
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£1,960.49 inc VAT£1,960.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series Touring E39 without level control only for 4 + 6 + 8 cylinders 70-105mm For 8 cylinders, the 6-cylinder support bearing must be obtained
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£1,774.49 inc VAT£1,774.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series Touring E39 R: without R: level control for 4+6+8 Cyl.:
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£2,009.99 inc VAT£2,009.99 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series Saloon E39 without R: level control for 4+6+8 Cyl. 70-105mm the 6-cylinder support bearing must be obtained
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£2,121.49 inc VAT£2,121.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series E34 Saloon (development was for 530i V8 with ABS):
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R CoiloversH&R Deep Coilover Kit for BMW 5 Series E34 Saloon (development was for 530i V8 with ABS): This kit is made to order in approx 10 weeks ( estimate ) we require the original front strut hub housings to build the suspension. These are refurbished as part of the build of the kit. Shipping of the strut / hub housings is the customer responsibility. For queries please email [email protected]£1,755.49 inc VAT£1,755.49 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series E28 For cars with ABS 55-90mm Imortant : Important : Hubs required from the original suspension to build the coilover.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R Coilovers£1,575.99 inc VAT£1,575.99 inc VAT -
H&R Deep Coilover Kit for BMW 5 Series E28 For cars without ABS only 55-90mm Important : Hubs required from the original suspension to build the coilover.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 5 Series, H&R CoiloversThis coilover requires the original hub unit to be supplied for refurbishment and coilers installation. This must be supplied in order to make the suspension which take 12-14 weeks.£1,575.99 inc VAT£1,575.99 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series Touring, F31. 4WD F: 70-95 / R: – 60-95:
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£2,095.00 inc VAT£2,095.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series Saloon F30 X Drive F: 70-95 / R: – 60-95mm:
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£2,095.00 inc VAT£2,095.00 inc VAT -
H&R Deep Coilover Kit for BMW M3/M4 Coupe/Cabrio F80/F82/F83 50-80mm (3 Point fixing)
Suspension, H&R Coilover Suspension, Shop by Car, BMW, M Series, H&R Coilovers£3,991.99 inc VAT£3,991.99 inc VAT -
H&R Deep Coilover Kit for Honda Civic Type R EP3 Special Low 50-110mm 29323-6 race springs: 50-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Honda, H&R Coilovers£1,989.00 inc VAT£1,989.00 inc VAT -
H&R Deep Coilover Kit for BMW M3/M4 Coupe/Cabrio F80/82/83 50-80mm (3 point fixing)
Suspension, H&R Coilover Suspension, Shop by Car, BMW, M Series, H&R Coilovers£3,991.99 inc VAT£3,991.99 inc VAT -
H&R Deep Coilover Kit for BMW E92 M3 V8 60-85mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, M Series, H&R Coilovers£2,046.99 inc VAT£2,046.99 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E90/E91/E92/E93 – Very Low 2WD F: 60-90mm R: 50-80mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,915.00 inc VAT£1,915.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E90/E91/E92 Very Low 4WD F: 60-90mm R: 50-80mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,915.00 inc VAT£1,915.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E46 M3 incl. Cabrio 30-80mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,783.99 inc VAT£1,783.99 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E46 – 4 Cyl. 2WD F: 50-100 30mm Lower Rear than GFW50480-5
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£2,096.49 inc VAT£2,096.49 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E46 – 4 Cyl. 2WD 50-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£2,021.99 inc VAT£2,021.99 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E36 Saloon 6 Cyl. F: 60-110mm / R: – 60-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,836.49 inc VAT£1,836.49 inc VAT -
H&R Deep Coilover Kit for BMW 3 series E36 Compact F: 60-110mm R: 50-80mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,712.49 inc VAT£1,712.49 inc VAT -
H&R Deep Clubsport Coilover Kit for BMW E30 M3, Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, M Series£1,519.00 inc VAT£1,519.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series E30 Saloon, Coupe, Cabrio, all with 4 + 6 Cyl. F: 60-90mm R: 50-80mm Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,676.49 inc VAT£1,676.49 inc VAT -
H&R Deep Coilover Kit for BMW 3 series, E21 2WD only with 51mm Ø Front Strut Diameter 55-90mm: Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,482.00 inc VAT£1,482.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 series, E21 2WD only with 45mm Ø F: Strut Clamp 50-90mm: Customers Original Struts Required to build this kit. Please contact us.
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£1,482.00 inc VAT£1,482.00 inc VAT -
H&R Deep Coilover BMW 1 Series / 3 Series F20 2WD F: 65-100mm / R: – 75-100mm
Suspension, H&R Coilover Suspension, Shop by Car, 3 Series, 1 Series, H&R CoiloversH&R Deep Coilover BMW 1 series F20 / 3 series F30, 2WD Lowering Front - 65-100/ Rear - 75-100 Fixed damping monotube coilovers£2,049.00 inc VAT£2,049.00 inc VAT -
H&R Deep Coilover Kit for BMW 3 Series Saloon F30. 2WD F: 70-110mm / R: – 70-100mm( Very Low )
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 3 Series, H&R Coilovers£2,290.00 inc VAT£2,290.00 inc VAT -
H&R Deep Coilover Kit for BMW 1 series E87 70-100mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 1 Series, H&R CoiloversH&R Deep Coilover Kit for BMW E87 1 series Not suitable for 6 cylinder engines Low Version front and rear : 70-100mm£1,840.00 inc VAT£1,840.00 inc VAT -
H&R Race Coilover BMW 1series M-Coupe E82 with aluminium support bearing (53mm + 48.5mm)
Suspension, H&R Coilover Suspension, Shop by Car, BMW, 1 Series, RSS Race Coilover SuspensionH&R Race Coilover BMW 1 series M-Coupe E82 2011-2012 with aluminium support bearing (53mm + 48.5mm)£2,870.00 inc VAT£2,870.00 inc VAT -
H&R Deep Coilover Kit Mini Cooper S Typ F56 3dr Low F: 50-75mm R: 45-75mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, Mini, Mini£1,710.00 inc VATH&R DEEP Coilovers - MINI (F56) Cooper S
Lowering front / rear (mm) 50-75 / 45-75 Hardness adjustment Without Axle load FA / RA (kg) Not specified Permit Without £1,710.00 inc VAT -
H&R Deep Coilover Kit Mini Inc. Coupe / Cabrio / Clubman R55/R56/R57 F: 45-75mm R: 55-75mm
Suspension, H&R Coilover Suspension, Shop by Car, BMW, Mini, Mini, H&R CoiloversH&R Deep Coilover Kit Mini Inc. Coupe / Cabrio / Clubman R55/R56/R57 F: 45-75mm R: 55-75mm£1,450.00 inc VAT£1,450.00 inc VAT -
H&R Deep Coilover Kit with Hardness Adjustment for Audi R8 2006>2015 ( Type 42 ) V8 + V10 Lowering : 40-95mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, R8, H&R Coilovers£2,659.00 inc VAT
£2,659.00 inc VAT -
H&R Deep Coilover Kit for Audi A8 + S8, Type D2 R: 55-70 / F: 60-100mm: (No rear Height adjustment )
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A8 / S8 / RS8, H&R Coilovers£2,368.99 inc VAT£2,368.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform 70-140mm: with damping adjustment
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover Suspension£2,531.99 inc VAT£2,531.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform 70-140mm: fixed damping
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover Suspension£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm With damping adjustment:
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover SuspensionH&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm With damping adjustment: Fits Audi RS6 C6 C7 delete kits also availble£2,695.00 inc VAT£2,695.00 inc VAT -
H&R Race Coilover Kit for Audi RS4 Avant B5 (8D) Low Version 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£2,035.00 inc VATH&R Race Derived Coilover Kit for Audi RS4 Avant B5 (8D) Avant 2000>
RSS-13-372-1/2SC Fixed damping monotube coilover system. For any queries please contact [email protected]£2,035.00 inc VAT -
H&R Race Coilover Kit for Audi RS4 Avant B5 (8D) 40-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£2,035.00 inc VATH&R Race Derived Coilover Kit for Audi RS4 Avant B5 (8D) Avant 2000>
RSS-13-372-1/1SC Fixed damping monotube coilover system. For any queries please contact [email protected]£2,035.00 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Avant 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,959.99 inc VATH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Avant Low Version 50-120mm 09/98>
RSS-13-471-5/1SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Saloon model please check RSS-13-471-5/2 For any queries please contact [email protected]£1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi S2 (B4 – 8C) / RS2 (P1) Avant 4WD
Suspension, H&R Coilover Suspension, Shop by Car, Audi, H&R CoiloversAudi H&R DEEP Coilovers – H&R Deep Coilover Kit for Audi S2 (B4 - 8C) / RS2 (P1) Avant 4WD 09/91>94 ( reference Rotiform Blue RS2 )£2,219.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 70-120mm + very lowThis is a custom made “Deep” version coilover kit made to order. £2,219.99 inc VAT -
H&R Deep Coilover Kit for Audi 100 Saloon Type 44 C3, 2WD: (mm lowering please ask)
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 100, H&R Coilovers£2,752.99 inc VAT£2,752.99 inc VAT -
H&R Deep Coilover Kit for Audi 100 C1: (mm lowering please ask) Front struts only
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 100, H&R Coilovers£1,266.49 inc VAT£1,266.49 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate 4WD 50-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 Saloon + Estate 4WD ( 4cylinder models ) for 5+6 cylinder models please check GFW50491-2-14SC£1,959.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mmThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Lim 2WD: 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R Coilovers£1,899.99 inc VATAudi H&R DEEP Coilovers – Audi 80 B4 2WD 09/91>94 ( for 4wd models please check GFW50491-2-12SC ) This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 60mm – 120mm.£1,899.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Coupe Urquattro 4WD ( Type 85 ) : mm lowering to required level ( VA + HA strut housings required )
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers - AUDI QUATTRO (85) 2.1 Turbo This is a custom made "Deep" version coilover kit made to order. we require the original front and rear strut housings from the vehicle, These are shipped to H&R's factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£1,899.99 inc VAT£1,899.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 89Q S2 4WD 60-120mm:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversH&R Deep Coilover Kit for Audi 80/90 Type 89Q S2 4WD 10/86>94 Lowering Range 60-120mm This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£2,349.99 inc VAT£2,349.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 81 ( B2 ) 2WD: mm lowering to required level
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – AUDI 80 Type 81 2WD models only£1,999.99 inc VATThis is a custom made “Deep” version coilover kit made to order. We require the original front and rear strut housings from the vehicle, These are shipped to H&R’s factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£1,999.99 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: with adjustable damping + adjustable camber top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,728.49 inc VAT£2,728.49 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: Inc. adjustable damping for oe top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,207.99 inc VAT£2,207.99 inc VAT -
H&R Deep Coilover Kit for Audi S1 8X Quattro
Suspension, H&R Coilover Suspension, Shop by Car, Audi, H&R CoiloversH&R Deep Coilover Kit for Audi S1 8X Quattro ( 170 KW ) 2014> for vehicles without electronic suspension control Lowered front axle from [mm]: 55 • Lowering front axle up to [mm]: 70 Lowered rear axle from [mm]: 40 • Lowered rear axle up to [mm]: 85 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,429.99 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,429.99 inc VAT -
H&R Deep Coilover Kit for Aston Martin Vantage: Special Low Vantage V12
Suspension, H&R Coilover Suspension, Shop by Car, Aston Martin, H&R CoiloversH&R Deep Coilover Kit for Aston Martin Vantage: Special Low Vantage V12 This Coilover System has been made with height adjustment and hardness adjustment to get the chassis lower than normal versions. The application is custom made to order so please contact us for a delivery timescale [email protected] This is a special low version coilover made by H&R Suspension in Germany.£4,159.99 inc VAT£4,159.99 inc VAT -
Muecke VW MK1 Golf 1 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW Golf 1 wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Please discuss this in advance with your test station!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW MK2 Golf 2 wider wings 3.2cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Golf 2 wings made of fiberglass 3,2 cm wider with all original breakpoints
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW MK3 Golf 3 Convertible widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Golf 3 convertible fiberglass wing 3 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Free shipping
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW MK3 Golf III widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Golf 3 GFK wing 3 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Please discuss this in advance with your test station! Adjustment work can be necessary.
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Passat B8 (Type 3G) widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened fiberglass wings 3cm per side, matching the original bumper
- unpainted, surface gray
- Material report is included
- from year 2014
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Passat B7 (Type 3C) widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Passat B7 widened mudguard 3 cm per side
- 1 set left & right suitable for the original bumpers
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Passat B5 facelift (Type 3BG) widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW Passat 3bg wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Please specify whether with turn signal or without turn signals
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Passat B5 (Type 3B) widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW Passat 3 B wing made of fiberglass 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW Passat B6 (Type 3C) widened wing 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW Passat 3c wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW Jetta MK 6 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right GFK wing 3cm per side widened matching the original bumper for VW Jetta MK 6
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Free shipping within Germany
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW MK5 Golf 5 Variant widened wings
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set Golf 5 Variant GFK wing 2.5 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke VW Scirocco widened wing 2.4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set VW Scirocco wing 2.4 cm widened in original look 1 set
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW Bora widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW Bora wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Please discuss this in advance with your test station!
£519.99 inc VAT -
VW Mk3 Caddy Muecke widened wings 2.4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right VW caddy mk3 2.4 cm widened wings from BJ 2010
- wing with turn signal
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke VW EOS widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set for VW EOS widened wings left & right 3 cm per side matching the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Muecke Skoda Superb II widened wings GFK 2.7cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set GFK mudguard for Skoda Superb 3T widens 2,7 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- In the picture you can see wings in carbon 899,00 Euro
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Skoda Octavia 5E widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Skoda Octavia 5E wing GFK 2,5 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Skoda Fabia 5j widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Skoda Fabia 5j wing GFK 2.5 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Skoda Octavia 1Z facelift wider wings 2.5cm per side
Muecke-Carbon & Bodywork Parts ( Wider Wings )£599.49 inc VAT- 1 set left & right GRP wing 2.5 cm widened
- Year 2009-2013
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£599.49 inc VAT -
Muecke Skoda Octavia 1Z prefacelift widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened wings made of GRP 3cm per side
- until BJ. 2009
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Seat Altea 2.7 cm per side widened wings
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 pair left & right widened wings 2.7 cm per side
- suitable for the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Seat Leon 1m widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set (Li-Re) widened wings 3 cm per side, matching the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Seat Toledo 1m widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right 3cm per side widened wings made of fiberglass
- unpainted, surface gray
- Material report will be delivered with, entry by individual acceptance
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Mercedes CLS W219 custom wings
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT1 set of left & right wings made of GRP not common !!
Material report will be delivered with, entry by individual acceptance § 21 StVZO
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Mercedes w 204 widened wings 2.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right 2.5 cm widened fiberglass wing
- suitable for the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Ford Focus MK3 prefacelift / facelift / tournament widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- Fits Ford Focus MK3 facelift and prefacelift all models
- 1 set left & right widened wings made of GRP 3cm per side widened
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Sold out
Muecke BMW Z4 rear apron GRP
Muecke-Carbon & Bodywork Parts ( Wider Wings )£349.00 inc VAT- BMW Z4 rear apron in GRP, carbon on request
- Material report is included
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£349.00 inc VAT -
Muecke Audi A6 4F widened wings 1.9cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT1 set left & right Audi A6 4F wing GFK 1.9 cm widened per side
unpainted, surface gelcoat gray
Marerial expert opinion is included, acceptance according to §21 StVZO (single acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Sold out
Muecke Audi A6 4F FL BJ. 08 – 11 RS6 look diffuser for cars without S-Line
Muecke-Carbon & Bodywork Parts ( Wider Wings )£198.00 inc VAT- Suitable for all Audi A6 4F Avant models without S-line from 08.08 - end series
- Diesel / Beziner
- Avant / Limousine
- ESD cut outs suitable for the oval RS6 look tailpipes
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£198.00 inc VAT -
Sold out
Muecke Rear apron Audi A6
Muecke-Carbon & Bodywork Parts ( Wider Wings )£198.00 inc VAT- Rear apron Audi A6 4f VFL Avant in RS6 optics made of fiberglass unpainted
- As shown in the picture made of carbon 599, - Euro
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£198.00 inc VAT -
Muecke Audi A6 4F widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A6 4F wing GFK 3 cm widened per side
- unpainted, surface gelcoat gray
- Marerial expert opinion is included, acceptance according to §21 StVZO (single acceptance)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A3 8P 8PA facelift from year 2009 wider wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set Audi A3 8P 8PA facelift wing GFK 3 cm wider from year 2008
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£519.99 inc VAT -
Sold out
Muecke Audi R8 front hood visible carbon
Muecke-Carbon & Bodywork Parts ( Wider Wings )£4,600.00 inc VAT- Audi R8 bonnet, boot lid in Sichtcarbon
- free delivery and assembly
- (within Germany)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£4,600.00 inc VAT -
Sold out
Muecke Audi R8 rear spoiler / rear wing visible carbon
Muecke-Carbon & Bodywork Parts ( Wider Wings )£2,350.00 inc VAT- Audi R8 rear spoiler / rear wing in carbon look
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£2,350.00 inc VAT -
Sold out
Muecke Audi R8 rear spoiler / rear wing GFK
Muecke-Carbon & Bodywork Parts ( Wider Wings )£1,150.00 inc VAT- Audi R8 rear spoiler / rear wing made of fiberglass
£1,150.00 inc VAT -
Muecke Audi TT 8N widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set of fiberglass Audi TT 8 N wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A4B6 fiberglass widened wings 3.5cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A4B6 wing GFK 3.5 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A4B6 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A4B6 wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material appraisals included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A4 B8 8K facelift widened wings 3 cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right GFK wing 3cm widened per side
- suitable from BJ 2011, matching the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Widened Audi A4B8 8K widened wing 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A4B8 to 2011 wing GFK 3 cm wider per side
- Prefacelift until BJ 2011
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi RS4 B5 Wings
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 – £1,850.00 inc VAT- Audi RS4 B5 widened wing 2.5 cm per side 1 set, left + right
- A material certificate will be delivered
- Made to an oe fitment to fit all original lines
- no modification to bumper is necessary
- Audi RS4 B5 wing stock width s1 set, left + right
- A material certificate will be delivered
- Made to an oe fitment to fit all original lines
- no modification to bumper is necessary
£519.99 – £1,850.00 inc VAT -
Muecke Rear spoiler Audi RS 4 B5
Muecke-Carbon & Bodywork Parts ( Wider Wings )£499.00 inc VATPlease contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£499.00 inc VAT -
Muecke Audi RS4 B5 wings full carbon 9 ( No fibreglass )
Muecke-Carbon & Bodywork Parts ( Wider Wings )£1,850.00 inc VAT- 1 set (left + right) mudguard made of GRP carbon for the Audi RS 4 B5
- !! not broadened !!
£1,850.00 inc VAT -
Muecke Audi A4B5 FL widened wings 3 cm per side
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A4B5 wing GFK 3 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included
- Acceptance according to § 21 (StVZO) required, please discuss this in advance with your test station!
£519.99 inc VAT -
Muecke Audi A3 S3 8V Saloon wider wings 3cm ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )When lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£519.99 inc VAT- 1 set fiberglass front wing R+L for Audi A3 8v saloon widened 3 cm per side
- also fits facelift (8V2)
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- for saloon models only
£519.99 inc VAT -
Muecke Audi A6 4B C5 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£499.99 inc VAT- 1 set left & right Audi A6 4B (C5) 3cm per side widened wings GFK Fits year 1997-2005 (except S and RS)
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£499.99 inc VAT -
Muecke Audi A7 widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right widened by 3 cm per side wings
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi A6 4G widened wings 3 cm per side
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right Audi A6 4G (C7) 3cm per side widened wing GFK Fits on from year 2010 (except RS)
- Facelift, preface lift
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Muecke Audi RS4 B8 widened wings 2cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£519.99 inc VAT- 1 set left & right by 2cm per side widened wings made of fiberglass
- unpainted, surface gelcoat gray
- Material report is delivered with
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£519.99 inc VAT -
Sold out
MQB Chassis Rear Brake Adapters
Shop by Product Type, Suspension, Shop by Car, Audi, Volkswagen, A3 / S3 / RS3, TT / TTS/ TTRS, Golf, Caddy, Scirocco / Corrado / Eos, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Brake AdaptionBrake caliper relocation adapters that allow fitment of an Vented S3/Golf R caliper to 356mm RS7 vented rear disc. A great upgrade when you already have a front 8 pot or 6 pot front wavey conversion and want the big rear disc look without the expense of a twin rear caliper set up.£220.00 – £870.00 inc VAT£220.00 – £870.00 inc VAT -
Sold out
Stillstatic Tailored Mats
Shop by Product Type, Accessories, Stillstatic MerchandiseVelour Luxury Mats for RHD vehicles starting from £119.99 inc vat 4 matts with logo on the front matts only. Nubuck edge. StillStatic Embroidered logo available in 4 varying positions. Choose contrast stitching colour. Choose logo colour. Contact us to check availability of your vehicle.£119.99 inc VAT£119.99 inc VAT -
StillStatic Define T Shirt – White
Shop by Product Type, Stillstatic MerchandiseStill static t shirt in white, red print£24.95 inc VAT£24.95 inc VAT -
StillStatic ReDefine T Shirt Black Full Colour Digital Print
Shop by Product Type, Stillstatic MerchandiseLogo designed by the immensely talented Ryan Mills (@millsnic), full colour digital print.£24.95 inc VAT£24.95 inc VAT
