H&R Deep 140mm Coilover Kit for Skoda Octavia Typ 1Z 50mm hub diameter 2WD
H&R Deep 140mm Coilover Kit for Skoda Octavia Typ 1Z 50mm hub diameter 2WD
£1,749.99 inc VAT
H&R Deep Coilover for Skoda Octavia Type 1Z with 55mm front hub 2WD + 4WD for models from 04/04>
Lowering is 70-140mm and uses original top mounts and supplied shorter drop links p/n PS28851VAA01-K
H&R Deep are monotube dampers with superior comfort while still be lower than ” normal ” versions.
This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors.
Supplied suspension may differ from image shown, for queries please email [email protected]
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V
A3 / S3 / RS3 H&R Deep Coilover Suspension
H&R Deep Coilover Kit for :
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V 08/12>
For A3 / S3 electronic damping models use delete kit p/n 93007-1 for RS3 use p/n 93008-1
These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts.
H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic.
This is reflected in the 2 year warranty proving the quality in the product and on the road.
If you are unsure which coilover best suits your needs please contact us [email protected]
Note: The picture may differ from the delivered product
The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited.
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£1,449.99 – £2,939.99 inc VAT
Gepfeffert V3 KW Coilover Skoda Octavia 5E 2WD
Shop by Car, KW Gepfeffert Coilover Suspension, Skoda Octavia KW Gepfeffert SuspensionFits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
| - damping technology adjustable in the rebound stage in 16 exact clicks |
| - damping technology adjustable in the compression stage in 12 exact clicks |
| - Stainless steel technology inox-line |
| - Individual, stepless lowering |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy use |
£2,205.00 – £2,720.00 inc VAT