-
-
-
-
-
-
-
-
Still Static Camber Castor Top Mounts Mk1-Mk3 Golf
Shop by Product Type, Suspension, Scirocco / Corrado / Eos, Golf Mk1 / Mk2 / Mk3, Coilover Suspension Accessories, Air Suspension Accessories, Coilover Suspension Parts, Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover Suspension£290.00 – £320.00 inc VATWhat Do I Get?
All Still Static top mounts are constructed from high-grade 7075 aluminium. Anodised black finishes are the most popular option although a huge selection of colours are available to order, making for great personalisation. A key feature of the Still Static top mounts is the spherical, high-impact, PTFE-lined bearing that’s present on each mount. Not only is this exceptionally hard wearing, but it’s also replaceable. So, if on the extremely rare occasion the bearing is damaged from a heavy impact, you don’t need to replace the entire top mount.Are They Available for My Car?
At present, Still Static Top Mounts are available for the Mk1, Mk2 and Mk3 VW platforms: Mk1 Top Mounts – Both camber (up to 2.5° negative) and caster (1.5° positive to 1.5° negative) are individually adjustable Mk2 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly Mk3 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly£290.00 – £320.00 inc VAT -
Leader Line 1/4″ – 1/8″
HP Drivetech Air Suspension SparesHP Drivetech Suspension Leader lines used on all front strut applications. Priced individually.£29.99 inc VAT£29.99 inc VAT -
H&R Electronic Damping Delete Kit
Shop by Product Type, Suspension, Shop by Car, Audi, BMW, Seat, Skoda, Volkswagen, Ford, Honda, Mercedes, Porsche, Vauxhall, A3 / S3 / RS3, A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A8 / S8 / RS8, TT / TTS/ TTRS, Polo, Golf, Passat, Transporter, R8, Scirocco / Corrado / Eos, 3 Series, 5 Series, 1 Series, Mini, Mini, M Series, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Lamborghini, 6 Series, T Roc, Tiguan, Touran, Passat CC, Octavia, Superb, Ibitha, Leon, 4 Series, 2 Series, Ateca, Kodiak, X Series, Suspension Electronics Delete Kits£318.99 – £458.99 inc VAT£318.99 – £458.99 inc VAT -
Sold out
HPDT Transporter T5/6/6.1 Replacement Rear Airbag
HP Drivetech Air Suspension Spares£360.00 inc VAT£360.00 inc VAT -
Polo 6R/6C / Audi A1 8X Coilover Suspension Gepfeffert KW V2 Suspension 40-80mm
Shop by Car, Polo, KW Gepfeffert Coilover SuspensionVW Polo 5 (6R/6C) 2008-2017 Gepfeffert V2 Coilover£1,780.00 – £2,200.00 inc VATFits the following models:
- VW Polo 6R/6C
- Audi A1
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,780.00 – £2,200.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S8 – D2 (1994-2002)
A8 / S8 / RS8, Drivetech - Air Suspension£2,890.00 inc VAT£2,890.00 inc VAT -
Sold out
HYBRIDair Coilover Lift Kit
Shop by Product Type, Suspension, HYBRIDair - Coilover Lift System£1,080.00 inc VAT£1,080.00 inc VAT -
H&R Deep Coilover Kit for VW Polo 5 6R/6C1 Audi A1 8X 2WD Very Low 80-110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > AUDI A1 (8X1, 8XK) | 05/2010-10/2018 Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. This version is -20mm shorter than GFW50015-1 which lowers 90mm max Lowered front axle from [mm]: 80 • Lowering front axle up to [mm]: 100 Lowered rear axle from [mm]: 80 • Lowered rear axle up to [mm]: 110 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,759.00 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,759.00 inc VAT -
H&R Deep Coilover Kit for VW Polo 5 6R / 6C1 / Audi A1 8X 2WD 60-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Volkswagen, Polo, A1 / S1, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > AUDI A1 (8X1, 8XK) | 05/2010-10/2018 Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. Lowered front axle from [mm]: 60 • Lowering front axle up to [mm]: 80 Lowered rear axle from [mm]: 60 • Lowered rear axle up to [mm]: 90 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,229.00 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,229.00 inc VAT -
Gepfeffert KW V3 Coilover Suspension Audi B5 S4 RS4
A4 / S4 / RS4, KW Gepfeffert Coilover SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi B5 S4 + RS4 - Lowering range 50-120mm , VW Inox Stainless Steel bodies.£1,810.00 – £2,490.00 inc VATFor more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,810.00 – £2,490.00 inc VAT -
Sold out
HYBRIDair The NEW Hideaway Air Management System (MK3-HA)
HYBRIDair - Coilover Lift System[video width="1280" height="720" mp4="https://still-static.com/wp-content/uploads/2022/05/MK3-HA-Removal.mp4"][/video] MK3-HA Product Description MK3-HA Installation Guide v1.0£750.00 inc VAT£750.00 inc VAT -
Drivetech Air Suspension Kit for Volkswagen Transporter – T6 T6.1 (2015>) T30
Transporter, Drivetech - Air Suspension£3,185.00 inc VAT
£3,185.00 inc VAT
