A3 / S3 / RS3

Filters

Showing 1–12 of 30 results

View 12/24/All

Departments

Price Filter

1-12 of 30 products

  • A3 / S3 / RS3 H&R Deep Coilover Suspension

    A3 / S3 / RS3 H&R Deep Coilover Suspension 6

    Shop now
  • A3 / S3 / RS3 HP Drivetech Air Suspension

    A3 / S3 / RS3 HP Drivetech Air Suspension 11

    Shop now
  • Audi A3 S3 RS3 KW Gepfeffert Suspension

    Audi A3 S3 RS3 KW Gepfeffert Suspension 7

    Shop now
  • Audi A3 8V widened fender 3cm widened per side
    £449.00 inc VAT
    Add to cart

    Muecke Audi A3 + S3 8V widened wing 3cm widened per side ( inc facelift )

    , , ,
    • 1 set fiberglass wing Re-Li for Audi A3 8v widened 3 cm per side
    • unpainted, surface gelcoat gray
    • Material report is included, acceptance according to §21 StVZO (individual acceptance)

    Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.

    £449.00 inc VAT
    £449.00 inc VAT
    Add to cart
  • £318.99 – £458.99 inc VAT
    Select options

    H&R Electronic Damping Delete Kit

    , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
    £318.99 – £458.99 inc VAT
    £318.99 – £458.99 inc VAT
    Select options
  • £1,663.99 inc VAT
    Add to cart

    H&R Deep Coilover Kit for Audi TT 8N, 4WD / S3 (L) / A3 (L) 50-110mm ( with shorter rear damper )

    ,
    £1,663.99 inc VAT
    £1,663.99 inc VAT
    Add to cart
  • £2,450.00 – £2,920.00 inc VAT
    Select options

    Gepfeffert V3 KW Coilover Audi RS3 8Y 4WD

    ,

    • Fits the following models:

      • Audi RS3 8Y
      • DDC Delete kit maybe rquired
     

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,450.00 – £2,920.00 inc VAT
    £2,450.00 – £2,920.00 inc VAT
    Select options
  • £2,095.00 inc VAT
    Select options

    Gepfeffert V2 KW Coilover Audi A3 S3 RS3 8V 4WD

    ,

    Fits the following models:

    • Audi A3 8v 4motion
    • Audi S3 8V
    • Audi RS3 8V
     

    Gepfeffert V2 with and without adjustable camber dome bearings

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,095.00 inc VAT
    £2,095.00 inc VAT
    Select options
  • £2,370.00 – £2,720.00 inc VAT
    Select options

    Gepfeffert V3 KW Coilover Audi A3 S3 RS3 8V 4WD

    ,

    • Fits the following models:

      • Audi A3 8v 4motion
      • Audi S3 8V
      • Audi RS3 8V
     

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,370.00 – £2,720.00 inc VAT
    £2,370.00 – £2,720.00 inc VAT
    Select options
  • £2,205.00 – £2,720.00 inc VAT
    Select options

    Gepfeffert V3 KW Coilover Audi A3 8V 2WD

    , ,

    Fits the following models:

    • VW Golf VII R
    • Audi S3 8V / RS3 8V
     

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,205.00 – £2,720.00 inc VAT
    £2,205.00 – £2,720.00 inc VAT
    Select options
  • £1,730.00 – £2,095.00 inc VAT
    Select options

    Gepfeffert V2 KW Coilover Audi A3 8V 2WD

    ,

    Fits the following models:

    • VW Golf VII
    • Audi TT 8S / A3 8V
    • Skoda Octavia 5E
    • Seat Leon 5F
     

    Gepfeffert V2 with and without adjustable camber dome bearings

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,730.00 – £2,095.00 inc VAT
    £1,730.00 – £2,095.00 inc VAT
    Select options
  • £1,730.00 inc VAT
    Select options

    Gepfeffert V1 KW Coilover Audi A3 8V with camber adjustable top mounts 2WD

    ,

    Fits the following models:

    • VW Golf VII
    • Audi TT 8S / A3 8V
    • Skoda Octavia 5E
    • Seat Leon 5F
     

    Gepfeffert V1 with adjustable camber adjustable top mounts

    The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    Balance of sportiness, comfort and safety.

    The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.  

    The gepfeffert.com® V1 coilover suspension made by KW

    Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.  

    Technical information:

    - Optimally adjusted in advance
    - sporty and harmonious damping technology
    - Stainless steel technology "inox-line"
    - individually height adjustable
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy handling
      Note: The picture may differ from the delivered product
    £1,730.00 inc VAT
    £1,730.00 inc VAT
    Select options
  • £2,926.00 inc VAT
    Add to cart

    Gepfeffert KW DDC Plug and Play Coilovers Audi S3 / RS3 8Y ( GY) 35-70mm

    ,
    Gepfeffert KW Coilover suspension for Audi S3 and RS3 8Y chassis, for use with original top mounts and retaining DDC Plug and Play function. This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,926.00 inc VAT
    £2,926.00 inc VAT
    Add to cart
  • £2,490.00 – £2,955.00 inc VAT
    Select options

    Gepfeffert KW V3 Coilovers Audi RSQ3 8U

    , , , ,
    Gepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi RSQ3 type 8U - Lowering range 45-80mm , VW Inox Stainless Steel bodies including Adjustable top mounts Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
       
    £2,490.00 – £2,955.00 inc VAT
    £2,490.00 – £2,955.00 inc VAT
    Select options
  • Wide Wings GT, Audi Rs3 8v Facelift
    £539.99 inc VAT
    Add to cart

    SRS-Tec 2.5cm Wider Wings GT, AUDI RS3 8V Facelift Saloon

    , ,

    Description

    Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Make: AUDI Modell: RS3 Type: 8V Model Year: 08/2017 – Submodell: Limousine / Saloon Notice 2,5cm wider per side then the stock wings. Wings can be mounted without any modification on the front bumper. Fit only for RS3 8V facelift Saloon only.
    £539.99 inc VAT
    £539.99 inc VAT
    Add to cart