Transporter

Filters

Showing 1–12 of 22 results

View 12/24/All

Departments

Price Filter

1-12 of 22 products

  • T7 Transporter
  • Transporter T5 T6 Gepfeffert KW Coilovers
  • Transporter MTS Coilover Suspension
  • £318.99£458.99 inc VAT
    £318.99£458.99 inc VAT
  • £3,079.00 inc VAT
    £3,079.00 inc VAT
  • £2,080.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 T28 T30 Cylindrical Clamp F: 100mm ( 130mm hub mod ) R: 130mm

    Transporter Deep Coilover made by H&R for StillStatic The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty. To fit Cylinder Hub type. Example pictures shows our T32 with approx 10mm threads remaining in the front 9 not hub modded version ) and 20mm threads remaining in the rear without load. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 130mm ( bump stop modification required ) Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm ( or 130mm with hub modding )  Rear : 130mm ( Bump stop modification required ) Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :130mm ( Bump stop modification required ) *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. Example coilover image shown, delivered product may vary.
    £2,080.00 inc VAT
    £2,080.00 inc VAT
  • £70.00 inc VAT

    MTS Technik Performance Damper for Transporter T5 T6 T6.1

    , , ,
    Performance Shock Absorber (rear) Volkswagen Transporter T5 T6 T6.1 Volkswagen Transporter T5 / T6 / T6.1 Engine 2.0 / 2.0TSI / 2.0TSI 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion Year 2003 - 01/15 > 2023 2 years warranty 2 year warranty with no mileage limit to confirm high quality. High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials. Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance. Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Measurement from centre of bushing : 440mm fully open , 300mm closed.
    £70.00 inc VAT
    £70.00 inc VAT
  • £550.00 inc VAT

    Transporter T5 / 6 / 6.1 356mm Rear Disc Upgrade

    , , ,
    Rear 356mm x 22mm Big Brake Disc kit Kit Includes New OE Redrilled 356mm Discs New Carriers and adapters New hardware Discs spacer All parts are supplied in raw OE finishes, an example of a completed installed kit is shown with the yellow powder coat finish. We also have Front Transporter brake kit options 365mm with Porsche 6 pot Cayenne caliper, or 400mm SQ7 kit with 6 pot akebono caliper.  
    £550.00 inc VAT
    £550.00 inc VAT
  • £395.00£545.00 inc VAT

    MB Design – KV4 Wheels Transporter T5 T6 T6.1 LOAD RATED

    ,
      MB Design - KV4 Wheels available fitment : 8.5" x 18"  ( Load Rated : 1008 KG per wheel ) 9" x 20" ( Load Rated : 965 KG per wheel ) Offset : ( custom offset and finish available by enquiry ) PCD : 5 x 120 Concave design. Big brake friendly. Priced per wheel. Load Rated 18" x 8.5" : 1008 KG per wheel Load Rated 9" x 20" : 965 KG per wheel High Quality German Made.
    £395.00£545.00 inc VAT
    £395.00£545.00 inc VAT
  • £680.00 inc VAT

    MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1 Cylindrical Clamp only

    ,
    Coilover Kit Volkswagen Transporter T5 / T6 / T6.1 for models with cylindrical clamp only. Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion. Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 - Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15 Volkswagen Transporter T6.1 Series: street Max. Axle Load FA: -1710 kg Max. Axle Load RA: -1720 kg Lowering FA: 30 - 70 mm Lowering RA: 30 - 60 mm Camber / top mount FA: no Camber / top mount RA: no Coilover Main Spring (Front): Spring rate (86 - 105 N/mm) Coilover Helper Spring (Front): Spring rate (20 N/mm) Coilover Main Spring (Rear): Spring rate (220 N/mm) TUV Certificate: yes
    Installation manual: Download installation manual
    2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry.
    £680.00 inc VAT
    £680.00 inc VAT
  • £1,530.00 inc VAT

    H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T25/28/30 Cylindrical Strut Clamp

    H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 80mm Rear : 70mm Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 80mm Rear : 70mm Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :90mm Rear :80mm *Note For vehicles with Electronic dampers use delete kit 93071-1 Only for vehicles with strut clamp bracket. The kit is fixed damping. Comes with 2 years manufacturers warranty. To fit Cylindrical hub only not clamp. Contact us if your require fitting.
    £1,530.00 inc VAT
    £1,530.00 inc VAT
  • £2,790.00 inc VAT

    Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T25 T28 T30

    , ,

    Gepfeffert KW V3 coilover for Transporter

    Fits transporter T5 T6 T6.1 2wd and 4wd models with Cylinder Clamp T25 T28 T30 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product  
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,790.00 inc VAT
    £2,790.00 inc VAT
  • £2,790.00 inc VAT

    Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32

    , , , ,

    Gepfeffert KW V3 coilover for Transporter

    Fits transporter T5 T6 T6.1 2wd and 4wd models with Clamp brackett T32 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product  
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,790.00 inc VAT
    £2,790.00 inc VAT
  • £2,980.00 inc VAT

    Gepfeffert V3 KW Coilover VW Transporter T7 2WD

    , , , ,

    Gepfeffert KW V3 coilover for Transporter T7

    For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 50-100mm.

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product  
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,980.00 inc VAT
    £2,980.00 inc VAT
  • £490.00£585.00 inc VAT

    H&R Anti Roll Bars Transporter T5 T5.1 T6 T6.1

    ,
    H&R are the industry leader in high performance, quality suspension components. Be it on the street or on the track, H&R has become synonymous with consistent, proven suspension performance and quality.  Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.   Product characteristics:
    • High-tensile steel
    • Precise forged ends
    • Powder coating
    • Composite rubber bearing
    • Over-/understeering adjustable
    • Less body roll
    • Higher agility
    • Minimal loss of comfort
    • Made in Germany
    • Delivered with TÜV approval or ABE
    ***Delivered item may vary from example image shown***
    £490.00£585.00 inc VAT
    £490.00£585.00 inc VAT