Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32

Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32

£2,790.00 inc VAT

Gepfeffert KW V3 coilover for Transporter

Fits transporter T5 T6 T6.1 2wd and 4wd models with Clamp brackett T32

For more stability or ride comfort. With adjustable compression and rebound damping.

The KW coilover suspension variant 3 “inox-line” is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their “TVR-A” and “TVC-A” technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.

Lowering range 80-140mm.

Special order item terms and conditions apply.

( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).

The® V3 coilover suspension made by KW

Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.


Technical information:

– damping technology adjustable in rebound
– damping technology adjustable in compression
– Stainless steel technology inox-line
– Individual, stepless lowering
– tested adjustment range
– ready-to-install complete solution
– High quality components for long service life
– complete documentation for easy use


Note: The picture may differ from the delivered product


This version offers more lowering range than the normal KW version.

The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited

After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.

If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).

KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.

Made to Order (contact us for lead time)