KW Gepfeffert Coilover Suspension

Filters

Showing 1–12 of 46 results

View 12/24/All

Departments

Price Filter

1-12 of 46 products

10% Off Gepfeffert Suspension from 15th November to 15th January 2025

  • Gepfeffert KW Spare Parts
  • £1,780.00£2,200.00 inc VAT

    Polo 6R/6C / Audi A1 Coilover Suspension Gepfeffert KW V2 Suspension 40-80mm

    , ,
    VW Polo 5 (6R/6C) 2008-2017 Gepfeffert V2 Coilover

    Fits the following models:

    • VW Polo 6R/6C
    • Audi A1
     

    Gepfeffert V2 with / without adjustable camber adjustable top mounts

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver.   Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,780.00£2,200.00 inc VAT
    £1,780.00£2,200.00 inc VAT
  • £1,810.00£2,490.00 inc VAT

    Gepfeffert KW V3 Coilover Suspension Audi B5 S4 RS4

    ,
    Gepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi B5 S4 + RS4 - Lowering range 50-120mm , VW Inox Stainless Steel bodies.

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
       
    £1,810.00£2,490.00 inc VAT
    £1,810.00£2,490.00 inc VAT
  • £1,790.00£2,290.00 inc VAT

    Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm

    , , , ,
    Audi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover

    Fits the following models:

    • Aud S1 8X 2014>

    Gepfeffert V2 with / without adjustable camber adjustable top mounts

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver.   Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,790.00£2,290.00 inc VAT
    £1,790.00£2,290.00 inc VAT
  • £1,335.00£2,120.00 inc VAT

    Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Moderate Low Version 40-75mm )

    ,
     

    Fits the following models:

    • VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
    • Audi TT 8J / A3 8P
    • Skoda Octavia 1Z
    • incl. 4motion / quattro
      Definition "small depth version / moderate low version ": We distinguish here coilovers of the brand gepfeffert.com made by KW, with or without adjustable camber dome bearings (model & platform dependent). The suspensions without adjustable top mounts have up to 35mm more lowering, compared to a standard KW coilover suspension. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm
    • GEPFEFFERT KW coilover suspension: adjustment range 35-75mm
    These suspensions were built specifically for our customers, who have put the focus on a maximum of 15-35mm more lowering compared to a series KW coilover suspension, without using a gepfeffert version with camber dome bearing (Uniballlager). The chassis with adjustable camber dome bearings, on the other hand, have even greater "leeway" for even more lowering and even more upgrade options, in order to be able to tailor the vehicle even more individually to the requirements of the respective driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm
    • GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.

    Technical information: V1

    - Optimally adjusted in advance
    - sporty and harmonious damping technology
    - Stainless steel technology "inox-line"
    - individually height adjustable
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy handling

    Technical information: V2

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use

    Technical information: V3

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,335.00£2,120.00 inc VAT
    £1,335.00£2,120.00 inc VAT
  • £1,685.00£2,590.00 inc VAT

    Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Low Version 60-120mm )

    ,
     

    Fits the following models:

    • VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
    • Audi TT 8J / A3 8P
    • Skoda Octavia 1Z
    • incl. 4motion / quattro
     

    Gepfeffert V1 with adjustable camber dome bearings

    The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    Balance of sportiness, comfort and safety.

    The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.  

    The gepfeffert.com® V1 coilover suspension made by KW

    Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with full payloads and maximum axle loads, the dampers always operate with a sporty characteristic curve. KW Variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.  

    Technical information: V1

    - Optimally adjusted in advance
    - sporty and harmonious damping technology
    - Stainless steel technology "inox-line"
    - individually height adjustable
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy handling

    Technical information: V2

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use

    Technical information: V3

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,685.00£2,590.00 inc VAT
    £1,685.00£2,590.00 inc VAT
  • £1,695.00£2,020.00 inc VAT

    Gepfeffert KW Coilover VW Mk4 Audi A38L TT8N Beetle Bora Seat Leon 1M – 2WD

    , , , , ,

    Gepfeffert KW Coilover suspension 2WD (low version)

    Fits the following models:

    • VW Golf IV / Beetle / Bora
    • Audi TT 8N / A3 8L
    • Seat Leon 1M

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information: V2

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use

    Technical information: V3

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - komplette Dokumentation für einfache Anwendung
      Note: The picture may differ from the delivered product
    KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,695.00£2,020.00 inc VAT
    £1,695.00£2,020.00 inc VAT
  • £3,088.00£4,240.00 inc VAT

    Gepfeffert / KW Porsche 964 C2 C4 V3 Coilovers

    ,
    Fits: Porsche 993 C2 C4 10/1993>> Normal version Lowers car by: F 20-40mm / R 10-30mm Gepfeffert Version : FT 40-90mm / R 40-90mm Gepfeffert Clubsport Version : FT 40-100mm / R 40-100mm • Independently adjustable damping technology -rebound and compression damping • inox-line stainless steel technology at no extra charge • Individual height adjustment • German TUV-tested adjustment parameters • High-quality components for long life • Comprehensive documentation for ease of use • Infinitely adjustable rebound damping • 14- level adjustable compression damping • Unique, independently functioning damping power adjustment Variant 3 race technology for the road with adjustable compression and rebound damping. The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.   The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £3,088.00£4,240.00 inc VAT
    £3,088.00£4,240.00 inc VAT
  • £2,450.00£2,920.00 inc VAT

    Gepfeffert V3 KW Coilover Audi RS3 8Y 4WD

    ,
    • Fits the following models:

      • Audi RS3 8Y
      • DDC Delete kit maybe required
     

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,450.00£2,920.00 inc VAT
    £2,450.00£2,920.00 inc VAT
  • £2,095.00£2,455.00 inc VAT

    Gepfeffert V2 KW Coilover BMW 1 Series (F20, F21) / 3 Series (F30) / 4 Series (F32) (with adjustable camber top mount)

    , , , ,

    Fits the following models:

    • 1er (F20, F21) Typ 1K2, 1K4
    • 3er (F30) + X Drive
    • 4er (F32) Typ 3C
     

    Gepfeffert V2 with and without adjustable camber dome bearings

    The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    For more stability or ride comfort. With adjustable rebound damping.

    The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.  

    The gepfeffert.com® V2 coilover suspension made by KW

    With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.  

    Technical information:

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,095.00£2,455.00 inc VAT
    £2,095.00£2,455.00 inc VAT
  • £45.00 inc VAT

    Gepfeffert KW Coilover MQB + PQ35 Anti Roll Bar links 310mm

    Gepfeffert KW Coilover MQB + PQ35 Anti Roll Bar links 310mm priced individually.   Fits Mk5 Mk6 Mk7 and similar Audi Platfoms A3 8P 8V TT   Please contact us if you have any questions.
    £45.00 inc VAT
    £45.00 inc VAT
  • £2,180.00 inc VAT

    Gepfeffert V3 Coilover suspension Golf 1 / Jetta 1 / Scirocco 1

    ,

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product   The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,180.00 inc VAT
    £2,180.00 inc VAT
  • £2,180.00 inc VAT

    Gepfeffert V3 Coilover VW Golf 2 / 3 / Corrado / Jetta 2 / Vento 3

    ,

    For more stability or ride comfort. With adjustable compression and rebound damping.

    The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.  

    The gepfeffert.com® V3 coilover suspension made by KW

    Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.  

    Technical information:

    - damping technology adjustable in rebound
    - damping technology adjustable in compression
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product   The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,180.00 inc VAT
    £2,180.00 inc VAT