H&R -130mm Rear Springs for Vehicles on Deep Coilovers ( Price Individually, Adjuster Not inc. )for VW Transporter T5/6 T25-30/32
H&R -130mm Rear Springs for Vehicles on Deep Coilovers ( Price Individually, Adjuster Not inc. )for VW Transporter T5/6 T25-30/32
£120.00 – £190.00 inc VAT
H&R Transporter replacement Rear Springs for Vehicles on Normal and Deep Coilovers
( Price Individually, Adjuster Not inc. )
for VW Transporter T5/6 T25-30/32, 130mm Version pictured.
SKU: 29267-1 HA
Category: Transporter
Tags: transporter deep rear spring, 130mm spring, 100mm spring, 90mm spring, t5 spring, t6 spring, t6.1 spring
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32
Shop by Car, Volkswagen, Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW CoiloversGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Clamp brackett T32 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
- damping technology adjustable in rebound |
- damping technology adjustable in compression |
- Stainless steel technology inox-line |
- Individual, stepless lowering |
- tested adjustment range |
- ready-to-install complete solution |
- High quality components for long service life |
- complete documentation for easy use |
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,790.00 inc VAT
H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 / 28 / 30 Cylindrical Clamp F: 100mm R: 90mm
Transporter
Transporter Deep Coilover made by H&R for StillStatic, 100mm Lowering in the front , 90mm lowering in the rear.
The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty.
To fit Cylinder Hub type.
Example pictures shows our T32 with approx 10mm threads remaining in the front and 20mm threads remaining in the rear without load.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 90mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm ( or 130mm with hub modding ) Rear : 90mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :90mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
Example coilover image shown, delivered product may vary.
£2,030.00 inc VAT
£2,030.00 inc VAT
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub
Transporter
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Clamp type hub only not cylindrical strut clamp.
Contact us if your require fitting.
£1,530.00 inc VAT
£1,530.00 inc VAT