Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm
  • Screenshot 2025-02-13 at 08.00.56
  • Screenshot 2025-02-13 at 08.00.56

Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm

£840.00 inc VAT

Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm

Available in 7-10 working days from order.

You want to drive 5×100 rims, but don’t want to change your original brakes?
Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the front and rear axles on the VW Golf 2, 3, Polo 6N (brakes: front axle Ø 312 mm, rear axle Ø 280 mm) is the answer to drive rims with a bolt circle of 5×100.
No adapter! No wheel spacers!

Scope of delivery:
2x brake disc, front axle
4x set of
brake pads, front axle 2x
brake callipers, front axle 2x brake calliper bracket, front axle 2x brake hose, front axle 2x brake disc,
rear axle 4x brake pads, rear axle 2x brake callipers, rear axle 2x brake calliper carrier, conversion, rear axle 2x wheel hub, rear axle 2x axle journal, rear axle 1x master brake cylinder including installation accessories. The use of this brake conversion kit on public roads generally requires individual approval in accordance with Section 21 of the Road Traffic Licensing Regulations by an officially recognized expert. For individual approval, we therefore provide the required material certificate in the scope of delivery and here under the “Documents” tab.

Installation side:front axle, rear axle
Brake type:disc brake
Brake caliper design:fist saddle
Brake disc type:ventilated
braking system:ATE, LUCAS
Wear warning contact:not prepared for wear warning indicator
Number of holes:5
Bolt circle diameter [mm]:100.0 mm
Centering diameter [mm]:65.0 mm
Supplementary Article/Supplementary Info 2:with wheel hub, with integrated magnetic sensor ring
Number of connections:4
Outer diameter [mm]:312 mm
Bore diameter [mm]:15.6 mm
Width [mm]:156.3 mm
Brake disc thickness [mm]:25.0 mm, 10 mm
Thickness [mm]:19.8 mm
Diameter [mm]:25.4 mm, 25.4 mm
Rim width of [inches]:16 inches
thread size:M10x1
Height [mm]:34.5 mm, 74.0 mm
Inner diameter [mm]:135.0 mm, 28 mm
Piston diameter [mm]:57 mm, 38 mm
Length 1 [mm]:31.5 mm
Length 2 [mm]:120.8 mm
Length [mm]:375.0 mm
Minimum thickness [mm]:22.0 mm
multi-part:multi-part
Unit of measure:Sentence
required quantity:1
Manufacturer approval:Special Parts
for brake disc diameter [mm]:280 mm
SKU: 111.047.031S Categories: , , Tags: , ,
000

    Recommended Products

    • £295.00 inc VAT
      Add to cart

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      £295.00 inc VAT

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      Pre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of ​​the StVZO
      £295.00 inc VAT

    Recommended Products

    • £295.00 inc VAT
      Add to cart

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      £295.00 inc VAT

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      Pre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of ​​the StVZO
      £295.00 inc VAT

    You might also like