-
£590.00 inc VAT
Brake conversion kit, HA Rear VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake KitsBrake conversion kit, HA, VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100
Do you want to drive 5x100 rims but don't want to change your original brakes? Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the rear axle of the VW Golf 1/2/3, Polo 6N (compact bearing 256 mm) is the answer to drive rims with a bolt circle of 5x100. No adapter! No wheel spacers! Scope of delivery: 2x brake disc 4x brake pad 2x axle pin 2x brake calliper 2x brake calliper bracket 2x wheel hub 2x conversion sleeve and accessories The use of this brake conversion kit on public roads usually requires an individual inspection in accordance with § 21 StVZO by an officially recognized expert. For the individual inspection, we therefore provide the required material certificate in the scope of delivery and here under the "Documents" tab.Brake type:disc brakeBrake caliper design:brake caliper (1-piston)Brake disc type:ventilatedbraking system:LUCASManufacturer restriction:TRWQuality:cross-cutNumber of holes:5Bolt circle diameter [mm]:100 mmOuter diameter [mm]:120 mm, 256 mmWidth [mm]:62 mmBrake disc thickness [mm]:22 mmInner diameter [mm]:30 mmPiston diameter [mm]:38 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:256 mm£590.00 inc VAT -
£590.00 inc VAT
Brake conversion kit, VA Front, G60 brake for VW Golf 1 Cabrio, calipers, brackets, discs, Brembo, without adapter, 280 mm
Shop by Product Type, Golf Mk1 / Mk2 / Mk3, Special Parts, Brake KitsBrake conversion kit, front axle, G60 brake, double piston, VW Golf 2/3, Corrado, 280 mm, Girling, 4 x 100
The perfect repair solution for the front axle of the VW Golf 2/3, Corrado, brake system: Girling, G-60 brake with double piston (280 mm, 4 x 100): Complete brake set including calipers, brackets, discs, pads. Scope of delivery: 2x brake disc 4x brake pad including accessories 2x brake caliper 2x brake caliper holderInstallation side:front axleBrake caliper design:brake caliper (2-piston)Brake disc type:ventilatedMaterial:cast ironQuality:cross-cutWear warning contact:including wear warning contactNumber of holes:4Bolt circle diameter [mm]:100 mmCentering diameter [mm]:60 mmSupplementary Article/Supplementary Info 2:with anti-squeak plateOuter diameter [mm]:280 mmBore diameter [mm]:14.5 mmWidth [mm]:145.0 mmBrake disc thickness [mm]:25 mmThickness [mm]:19.5 mmHeight [mm]:42 mm, 71.0 mmInner diameter 1 [mm]:139 mmMinimum thickness [mm]:22 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special PartsPiston diameter 1 [mm]:40 mmPiston diameter 2 [mm]:45 mm£590.00 inc VAT -
£250.00 inc VAT
Pre-assembled hub, 4 x 100, front left + right, VW Golf 1, Caddy, Scirocco for 16V / G60 brake
Shop by Product Type, Special Parts, HubsDue to the high demand from our customers, Special Parts now also offers the pre-assembled steering knuckle repair solution (standard bolt circle 4x100) for the VW Golf 1, Caddy, Scirocco for 16V or G60 brakes on the front axle in the range. Scope of delivery: 2x pre-assembled steering knuckles including wheel hub and wheel bearingInstallation side:front axle on both sidesDrive shaft:without ABS ringMounting type:pre-assembledRim Hole Number:4.0 holeBolt circle diameter [mm]:100 mmOuter diameter [mm]:64 mm, 34 mmWidth [mm]:37 mmInner diameter [mm]:34 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Parts£250.00 inc VAT -
£1,050.00 inc VAT
Brake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm
Special Parts, Golf Mk1 / Mk2 / Mk3, Brake KitsBrake conversion kit, front + rear, VW Golf 2 + 3, Polo 6N, bolt circle: 5 x 100, large brake: front Ø 312 mm, rear Ø 280 mm
You want to drive 5x100 rims, but don't want to change your original brakes? Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the front and rear axles on the VW Golf 2, 3, Polo 6N (brakes: front axle Ø 312 mm, rear axle Ø 280 mm) is the answer to drive rims with a bolt circle of 5x100. No adapter! No wheel spacers!Scope of delivery: 2x brake disc, front axle 4x set of brake pads, front axle 2x brake callipers, front axle 2x brake calliper bracket, front axle 2x brake hose, front axle 2x brake disc, rear axle 4x brake pads, rear axle 2x brake callipers, rear axle 2x brake calliper carrier, conversion, rear axle 2x wheel hub, rear axle 2x axle journal, rear axle 1x master brake cylinder including installation accessories. The use of this brake conversion kit on public roads generally requires individual approval in accordance with Section 21 of the Road Traffic Licensing Regulations by an officially recognized expert. For individual approval, we therefore provide the required material certificate in the scope of delivery and here under the "Documents" tab.Installation side:front axle, rear axleBrake type:disc brakeBrake caliper design:fist saddleBrake disc type:ventilatedbraking system:ATE, LUCASWear warning contact:not prepared for wear warning indicatorNumber of holes:5Bolt circle diameter [mm]:100.0 mmCentering diameter [mm]:65.0 mmSupplementary Article/Supplementary Info 2:with wheel hub, with integrated magnetic sensor ringNumber of connections:4Outer diameter [mm]:312 mmBore diameter [mm]:15.6 mmWidth [mm]:156.3 mmBrake disc thickness [mm]:25.0 mm, 10 mmThickness [mm]:19.8 mmDiameter [mm]:25.4 mm, 25.4 mmRim width of [inches]:16 inchesthread size:M10x1Height [mm]:34.5 mm, 74.0 mmInner diameter [mm]:135.0 mm, 28 mmPiston diameter [mm]:57 mm, 38 mmLength 1 [mm]:31.5 mmLength 2 [mm]:120.8 mmLength [mm]:375.0 mmMinimum thickness [mm]:22.0 mmmulti-part:multi-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:280 mm£1,050.00 inc VAT -
£329.00 inc VAT
SRS-Tec Rear Inner Arch Liners, Wheel arch liners, Land Rover Defender 110
SRS-TecSRS-Tec Rear Inner Arch Liners, Wheel arch liners, Land Rover Defender 110 ( not suitable for 90 ) Article Wheel liners rear axle Area of use Vehicle manufacturer: Land Rover Vehicle model: Defender Model year: 1990 – 2016 Version: 110 (not suitable for 90)£329.00 inc VATproduct details
Note: Inner wheel house liners for the rear axle on the Defender 110. Prevents dirt from getting into the wheel house. Not suitable for the Defender 90. Material High-quality, glass fiber reinforced composite material Product protection Our products and our design are protected by patent law worldwide!assembly
Screwing to original mounting points, no modifications requiredscope of delivery
– SRS-Tec wheel house liners rear axle left / right (unpainted) – Installation instructions£329.00 inc VAT -
£39.00 inc VAT
2x anchor plate, splash guard, front axle, VW Golf 1/2/3, conversion G60 280 mm brake
Shop by Product Type, Special Parts, Brake Kits2x anchor plate, splash guard, front axle, VW Golf 1/2/3, conversion G60 280 mm brake
In our program: Due to the high demand from our customers, Special Parts also offers the anchor plates or splash guards for the front axle of the VW Golf 1/2/3, conversion G60 280 mm brake in the range.Installation side:front axleSurface:phosphated, painted, KTL-coated (cathod dip painting)multi-part:two-partUnit of measure:Sentencerequired quantity:1Manufacturer approval:Special Partsfor brake disc diameter [mm]:312 mm, 280 mm£39.00 inc VAT
Speak to the Experts
We’ve got extensive experience on many platforms on many solutions! Static? Air? Something in between? Talk to the experts.
Secure Checkout
Shop safely and quickly with a choice of payment options