Suspension

Filters

Showing 37–48 of 277 results

Departments

Price Filter

37-48 of 277 products

  • £1,685.00 – £2,590.00 inc VAT
    Select options

    Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Low Version 60-120mm )

    ,
     

    Fits the following models:

    • VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
    • Audi TT 8J / A3 8P
    • Skoda Octavia 1Z
    • incl. 4motion / quattro
     

    Gepfeffert V1 with adjustable camber dome bearings

    The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:
    • Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
    • GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
    • GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
    Chassis of the brand gepfeffert KW "small depth version" (without camber dome bearing) can of course also be found here in the online store.  

    Balance of sportiness, comfort and safety.

    The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.  

    The gepfeffert.com® V1 coilover suspension made by KW

    Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with full payloads and maximum axle loads, the dampers always operate with a sporty characteristic curve. KW Variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.  

    Technical information: V1

    - Optimally adjusted in advance
    - sporty and harmonious damping technology
    - Stainless steel technology "inox-line"
    - individually height adjustable
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy handling

    Technical information: V2

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use

    Technical information: V3

    - damping technology adjustable in the rebound stage in 16 exact clicks
    - damping technology adjustable in the compression stage in 12 exact clicks
    - Stainless steel technology inox-line
    - Individual, stepless lowering
    - tested adjustment range
    - ready-to-install complete solution
    - High quality components for long service life
    - complete documentation for easy use
      Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,685.00 – £2,590.00 inc VAT
    £1,685.00 – £2,590.00 inc VAT
    Select options
  • £519.00 – £819.00 inc VAT
    Select options

    MTS Technik Street Coilover Kit Volkswagen Golf Mk4 + Bora ( Audi TT 8N, A3 8L, Seat Leon Mk1, Skoda Octavia ) 2WD

    ,

    Coilover Kit Volkswagen Golf IV

    Coilover Kit MTS Technik for Volkswagen Golf IV and Similar ( Check List ), lowering the front axle between 30 - 60 mm, and rear between 25 - 50 mm. Dedicated for the years of: 08/97 - 12/07, for the engine version: 1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 1.8T GTI / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI.
    Series: comfort
    Max. Axle Load FA:
    -1020 kg
    Max. Axle Load RA:
    -1020 kg
    Lowering FA:
    30 - 60 mm
    Lowering RA:
    25 - 50 mm
    Camber / top mount FA:
    yes
    Camber / top mount RA:
    no
    Coilover Main Spring (Front):
    Spring rate (50 N/mm)
    Coilover Helper Spring (Front):
    Spring rate (20 N/mm)
    Coilover Main Spring (Rear):
    Spring rate (28 - 55 N/mm)
    TUV Certificate:
    no
    Download information brochure: Download information brochure
    Download installation manual: Download installation manual
      2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry.  
    3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
    5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
    6 - If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
    8 - Not for 4x4.
    21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
    24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
    73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
    Audi TT 8N Roadster1.8T10/99 - 06/06
    Skoda Octavia I Kombi1.4 / 1.4 16V / 1.6 / 1.8 / 1.8T / 2.0 / 1.9SDI / 1.9TDI07/98 - 12/10
    Volkswagen Bora Kombi1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 1.8T / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI05/99 - 05/05
    Volkswagen Golf IV1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 1.8T GTI / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI08/97 - 12/07
    Seat Leon I (1M1)1.4 16V / 1.6 / 1.6 16V / 1.8 20V / 1.8T / 1.9SDI / 1.9TDI11/99 - 06/06
    Seat Toledo II (1M2)1.4 16V / 1.6 / 1.6 16V / 1.8 20V / 2.3 V5 / 2.3 V5 20V / 1.9TDI10/98 - 05/06
    Skoda Octavia I Sedan1.4 / 1.4 16V / 1.6 / 1.8 / 1.8T / 2.0 / 1.9SDI / 1.9TDI09/96 - 12/10
    Volkswagen Golf IV Kombi1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI05/99 - 06/06
    Volkswagen New Beetle1.4 / 1.6 / 1.8T / 2.0 / 2.3 V5 / 2.5 / 1.9TDI01/98 - 11/10
    VolkswagenNew Beetle Cabriolet1.4 / 1.6 / 1.8T / 2.0 / 2.5 / 1.9TDI09/02 - 12/11
    Volkswagen Bora1.4 16V / 1.6 / 1.6 16V / 1.6FSI / 1.8 / 1.8T / 2.0 / 2.3 V5 / 1.9SDI / 1.9TDI10/98 - 12/13
    Audi TT 8N Coupe1.8T10/98 - 06/06
    AudiA3 8L1.6 / 1.8 / 1.8T / 1.9TDI09/96 - 09/06
    £519.00 – £819.00 inc VAT
    £519.00 – £819.00 inc VAT
    Select options
  • £569.00 – £909.00 inc VAT
    Select options

    MTS Technik Street Gold Coilover Kit BMW 3 SERIES / E36 COMPACT / Z3 Coupe / Z3 Roadster

    ,

    Coilover Kit BMW 3 Series / E36 Compact

    Coilover Kit MTS Technik for BMW 3 Series / E36 Compact, lowering the front axle between 20 - 90 mm on original top mounts ( additional 20mm with camber adjustable top mounts ), and rear between 10 - 40 mm. Dedicated for the years of: 01/94 - 08/00, for the engine version: 316i / 316g / 318ti / 318tds / 323ti
    Series: street
    Max. Axle Load FA:
    -900 kg
    Max. Axle Load RA:
    -1040 kg
    Lowering FA:
    20 - 90 mm
    Lowering RA:
    10 - 40 mm
    Camber / top mount FA:
    no
    Camber / top mount RA:
    no
    Coilover Main Spring (Front):
    Spring rate (60 N/mm)
    Coilover Helper Spring (Front):
    Spring rate (20 N/mm)
    Coilover Main Spring (Rear):
    Spring rate (46 - 90,1 N/mm)
    TUV Certificate:
    yes
    3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
    21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
    24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
    33 - Including M-Technik.
    58 - For models up to 11/91 and M3 - the shortened sway bar link MTSLS08 shall be purchased separately.
    73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
      2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry. Fits the following Vehicles :
    BMW Z3 Coupe / E36 2.8i / 3.0i / M3.2 04/97 - 06/03
    BMW Z3 Roadster / E361.8i / 1.9i / 2.0i / 2.2i / 2.8i / 3.0i / M3.2 10/95 - 01/03
    BMW 3 Series / E36 Compact 316i / 316g / 318ti / 318tds / 323ti 01/94 - 08/00
    Installation manuals
    Download installation manual MTSGWBM99: Download installation manual
    Download installation manual MTSGWBM117: Download installation manual
    Download installation manual MTSGWBM02: Download installation manual
    £569.00 – £909.00 inc VAT
    £569.00 – £909.00 inc VAT
    Select options
  • £689.00 inc VAT
    Add to cart

    MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1 Cylindrical Clamp only

    ,
    Coilover Kit Volkswagen Transporter T5 / T6 / T6.1 for models with cylindrical clamp only. Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion. Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 - Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15 Volkswagen Transporter T6.1 Series: street Max. Axle Load FA: -1710 kg Max. Axle Load RA: -1720 kg Lowering FA: 30 - 70 mm Lowering RA: 30 - 60 mm Camber / top mount FA: no Camber / top mount RA: no Coilover Main Spring (Front): Spring rate (86 - 105 N/mm) Coilover Helper Spring (Front): Spring rate (20 N/mm) Coilover Main Spring (Rear): Spring rate (220 N/mm) TUV Certificate: yes
    Installation manual: Download installation manual
    2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry.
    £689.00 inc VAT
    £689.00 inc VAT
    Add to cart
  • £530.00 inc VAT
    Add to cart

    Wheel hub conversion kit, front + rear, Audi 80 to 5×112, front = 75mm, rear = 75mm, with wheel bearing, front, rear

    , ,
    Available in 10-14 working days from order, Special order terms apply. Wheel hub conversion kit, front + rear, Audi 80 to 5x112, front = 75mm, rear = 75mm, with wheel bearing, front, rear Wheel hub conversion kit from Special Parts to a bolt circle of 5x112 for the front and rear axle of Audi 80. Special Parts wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. Special Parts wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter [mm]:75mm Required quantity:1 Installation side:Front axle, rear axle multi-part:multi-part Unit of measure:Sentence Fits the following vehciles : AUDI 80 B3 notchback (893, 894, 8A2) 1.4 65 hp 1400cc 06/1986 - 10/1991 - 0588 380 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 75 hp 1595 cc 06/1986 - 10/1991 - 0588 382 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 70 hp 1595 cc 06/1986 - 10/1991 - 0588 415 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 102 hp 1595 cc 06/1986 - 10/1991 - AUDI 80 B3 notchback (893, 894, 8A2) 1.6D 54 hp 1588 cc 06/1986 - 10/1991 - 0588 379 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 TD 80 hp 1588 cc 06/1986 - 10/1991 - 0588 384 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 75 hp 1781 cc 06/1986 - 10/1991 - 0588 381 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 113 hp 1847 cc 06/1986 - 10/1991 - 0588 388 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E 112 hp 1781 cc 06/1986 - 10/1991 - 0588 387 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E quattro 112 hp 1781 cc 06/1986 - 10/1991 - 0588 404 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 quattro 113 hp 1847 cc 06/1986 - 10/1991 - 0588 405 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 88 hp 1781 cc 06/1986 - 10/1991 - 0588 385 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 90 hp 1781 cc 06/1986 - 10/1991 - 0588 511 0588 386 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 88 hp 1781 cc 06/1986 - 10/1991 - 0588 402 Chassis number (VIN) from: 89-J-351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 90 hp 1781 cc 06/1986 - 10/1991 - 0588 403 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.9 D 68 hp 1896 cc 06/1986 - 10/1991 - 0588 471 AUDI 80 B3 notchback (893, 894, 8A2) 2.0112 hp1984 cc 06/1986 - 10/1991 -0588 488 0588 407 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 113 hp 1984 cc 06/1986 - 10/1991 - 0588 426 AUDI 80 B3 notchback (893, 894, 8A2) 2.0E 16V 137 hp 1984 cc 06/1986 - 10/1991 - 0588 492 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 16V quattro 137 hp 1984 cc 06/1986 - 10/1991 - 0588 498 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E quattro 113 hp 1984 cc 06/1986 - 10/1991 - 0588 424 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 112 hp 1984 cc 06/1986 - 10/1991 - 0588 495 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 115 hp 1984 cc 06/1986 - 10/1991 - 0588 502 AUDI 80 B3 notchback (893, 894, 8A2) 2.3 quattro 133 hp 2309 cc 06/1986 - 10/1991 - AUDI 80 B4 Avant (8C5) 1.6 E 101 hp 1595 cc 09/1991 - 01/1996 - 0588 580 AUDI 80 B4 Avant (8C5) 1.9 TD 75 hp 1896 cc 09/1991 - 01/1996 - AUDI 80 B4 Avant (8C5) 1.9 TDI 90 hp 1896 cc 09/1991 - 01/1996 - 0588 543 AUDI 80 B4 Avant (8C5) 2.0 90 hp 1984 cc 09/1991 - 01/1996 - 0588 544 AUDI 80 B4 Avant (8C5) 2.0 E 115 hp 1984 cc 09/1991 - 01/1996 - 0588 545 AUDI 80 B4 Avant (8C5) 2.0E 16V 140 hp 1984 cc 09/1991 - 01/1996 - 0588 572 AUDI 80 B4 Avant (8C5) 2.3 E 133 hp 2309 cc 09/1991 - 01/1996 - 0588 546 AUDI 80 B4 Avant (8C5) 2.3 E quattro 133 hp 2309 cc 09/1991 - 01/1996 -0588 547 Rim size [inch]: 15 inches AUDI 80 B4 notchback (8C2) 1.6 71 hp 1595 cc 09/1991 - 07/1995 - 0588 542 AUDI 80 B4 notchback (8C2) 1.6 E 101 hp 1595 cc 09/1991 - 07/1995 - 0588 579 AUDI 80 B4 notchback (8C2) 1.9 TD 75 hp 1896 cc 09/1991 - 07/1995 - 0588 534 AUDI 80 B4 notchback (8C2) 1.9 TDI 90 hp 1896 cc 09/1991 - 07/1995 - 0588 535 AUDI 80 B4 notchback (8C2) 2.0 90 hp 1984 cc 09/1991 - 07/1995 - 0588 519 AUDI 80 B4 notchback (8C2) 2.0 E 115 hp 1984 cc 09/1991 - 07/1995 - 0588 536 AUDI 80 B4 notchback (8C2) 2.0E 16V 140 hp 1984 cc 09/1991 - 07/1995 - 0588 560 AUDI 80 B4 notchback (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 AUDI 80 B4 notchback (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 AUDI 80 B4 notchback (8C2) 2.3 E 133 hp 2309 cc 09/1991 - 07/1995 - 0588 538 AUDI 80 B4 notchback (8C2) 2.3 E quattro 133 hp 2309 cc 09/1991 - 07/1995 - 0588 539 AUDI 80 B4 notchback (8C2) 2.6 quattro 150 hp 2598 cc 09/1991 - 07/1995 - 0588 563 AUDI 80 B4 notchback (8C2) 2.8 quattro 174 hp 2771 cc 09/1991 - 07/1995 - 0588 521
    £530.00 inc VAT
    £530.00 inc VAT
    Add to cart
  • £289.00 – £550.00 inc VAT
    Select options

    Wheel hub conversion kit Audi 80 S2 with 82mm wheel bearing

    , ,
    Available in 10-14 working days from order. Special order terms apply. Wheel hub conversion kit, front or rear Audi 80 S2 with 82mm wheel bearing ( for 75mm bearing please check our other listing ) Please email us your chassis number so we can check fitment before ordering via [email protected] Wheel hub conversion kit to a bolt circle of 5x112 for the front axle of the Audi 80 and 90 series with an 82 wheel bearing diameter. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter 1 [mm]:43mm Outer diameter 2 [mm]:131mm Required quantity:1 Width (mm]:92.3mm Installation side:Front axle on both sides Rim hole number:5 -hole Thread size:M14x1.5 Manufacturer approval:Special parts Hole circle Ø [mm]:112mm multi-part:two parts Unit of measure:Sentence Number of teeth:38 Admission type:subject to registration P/N 46859 to fit : Wheel Hub conversion kit front and rear  : 895 407 615A
    £289.00 – £550.00 inc VAT
    £289.00 – £550.00 inc VAT
    Select options
  • Sale
    £200.00 inc VAT
    Add to cart

    2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right

    , ,
    2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right In our range: Due to high demand from our customers, Special Parts now also offers this complete brake caliper set for VW Golf 7 GTI Performance, 340 mm, calipers + holder, rear axle left right in our range. Scope of delivery: 2x brake caliper 2x brake caliper holder Required quantity:1 Caliper color:red Braking system:TRW Installation side: Front axle left, front axle right Piston diameter [mm]:60mm Material:Gray cast iron multi-part:multi-part Unit of measure:Sentence
    £200.00 inc VAT
    £200.00 inc VAT
    Add to cart
  • £215.00 – £430.00 inc VAT
    Select options

    Brake caliper holder set, VA ( Front ), Golf 1, Plug & Play G60

    , ,
    Brake caliper holder set, VA, Golf 1, Plug & Play G60 Special Parts offers a complete set of brake caliper holders as plug & play for G60 brakes, front axle, suitable for VW Golf 1 models, for installing a 280 mm brake disc. The scope of delivery includes 2 pieces of brake caliper holder including mounting material. for brake disc diameter [mm]:280mm Required quantity:1 Brake type:Disc brake Installation side:Front axle Manufacturer approval:Special parts multi-part:two parts Unit of measure:Sentence
    £215.00 – £430.00 inc VAT
    £215.00 – £430.00 inc VAT
    Select options
  • £120.00 inc VAT
    Add to cart

    Rear Set Brake Disc + Pads + Rear wheel bearing 5 x 100 VW Golf II/III Corrado Passat Vento

    , ,
    Brake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is ​​a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]:226mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Brake disc type:Full Brake disc thickness [mm]:10.0mm Braking system:LUCAS Installation side:rear axle Manufacturer approval:Frenix Number of holes:5 Hole circle Ø [mm]:100mm multi-part:multi-part Unit of measure:Sentence VW CORRADO (53I) 2.9 VR6 190 hp 2861 cc 08/1987 - 12/1995 - 0600 905 VW GOLF III (1H1) 1.9 TDI 110 hp 1896 cc 10/1989 - 07/1998 - 0603 387 0600 279 VW GOLF III (1H1) 2.0 115 hp 1984 cc 10/1989 - 07/1998 - 0603 388 0600 893 VWGOLF III (1H1)2.0 GTI 16V 150 hp1984 cc10/1989 - 07/1998 -0603 3900600 908 VWGOLF III (1H1)2.8 VR6 174 hp 2792 cc 10/1989 - 07/1998 -0600 8940603 391 VWGOLF III Variant (1H5) 1.9 TDI 110 hp 1896 cc 07/1993 - 04/1999 -0603 4020600 281 VWGOLF III Variant (1H5) 2.0 115 hp1984 cc07/1993 - 04/1999 -0600 9400603 403 VWPASSAT B3/B4 (3A2, 35I) 1.9 TDI 110 hp 1896 cc 02/1988 - 12/1997 -0600 297 Brake type: drum brake VWPASSAT B3/B4 (3A2, 35I) 2.0 16V 150 hp 1984 cc 02/1988 - 12/1997 -0600 949 VWPASSAT B3/B4 (3A2, 35I) 2.8 VR6 174 hp 2792 cc 02/1988 - 12/1997 -0600 835 VWPASSAT B3/B4 Variant (3A5, 35I) 1.9 TDI 110 hp1896 cc02/1988 - 06/1997 -0600 298Year ofmanufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.0 16V 150 hp1984 cc02/1988 - 06/1997 -0600 950Year of manufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.8 VR6 174 hp2792 cc02/1988 - 06/1997 -0600 836 SEATTOLEDO I (1L2)2.0 i 16V 150 hp1984 cc 01/1991 - 10/1999 -7593 374 Year of manufacture until: 09.98 for combined PR number: 1KD+1KKYear of manufacture from: 09.96 VWVENTO (1H2) 2.0 115 hp 1984 cc11/1991 - 09/1998 - 0600 9000603 414 VWVENTO (1H2) 2.8 VR6 174 hp2792 cc11/1991 - 09/1998 - 0603 4150600 901
    £120.00 inc VAT
    £120.00 inc VAT
    Add to cart
  • Sale
    £95.00 inc VAT
    Add to cart

    Brake disc conversion kit, VA ( Front ), VW Passat 35i without plus axle 280mm G60 conversion bolt circle 5×100

    , ,
    Brake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is ​​a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]: 226mm Required quantity: 1 Braking/driving dynamics: for vehicles with ABS Brake disc type: Full Brake disc thickness [mm]: 10.0mm Braking system: LUCAS Installation side: rear axle Manufacturer approval: Frenix Number of holes: 5 Hole circle Ø [mm]: 100mm multi-part: multi-part Unit of measure: Sentence
    £95.00 inc VAT
    £95.00 inc VAT
    Add to cart
  • £295.00 inc VAT
    Add to cart

    Pre-assembled steering knuckle, VA Front left + Right, VW GOLF II / III with ABS 4x 100

    , ,
    Pre-assembled steering knuckle, VA left + Right, VW GOLF II / III with ABS 4x 100 Pre-assembled steering knuckle for standard bolt circle of 4x100 for Seat Ibiza II, VW Caddy II, VW Golf II, with ABS, front axle left, consisting of 1x steering knuckle 1x wheel bearing set 1x wheel hub mounting accessories suitable pre-assembled steering knuckle right: 107764/5 Supplementary article/Supplementary information 2: with wheel bearing, with wheel hub, with sensor, wheel speed Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle left Manufacturer approval:assembled/assembled, special parts multi-part:multi-part Unit of measure:Sentence paired article number: 107764/5
    £295.00 inc VAT
    £295.00 inc VAT
    Add to cart
  • £295.00 inc VAT
    Add to cart

    Pre-assembled steering knuckle, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

    , ,
    Pre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of ​​the StVZO
    £295.00 inc VAT
    £295.00 inc VAT
    Add to cart
Essen Motorshow Promotional Sale Live until 15th Jan 2025 -15% on all H&R Deep Coilovers -10% on all Gepfeffert KW ultralow coilovers