-
H&R Deep Coilover Kit for Audi 80 Type 81 ( B2 ) 2WD: mm lowering to required level
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – AUDI 80 Type 81 2WD models only£1,999.99 inc VATThis is a custom made “Deep” version coilover kit made to order. We require the original front and rear strut housings from the vehicle, These are shipped to H&R’s factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£1,999.99 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: with adjustable damping + adjustable camber top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,728.49 inc VAT£2,728.49 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: Inc. adjustable damping for oe top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,207.99 inc VAT£2,207.99 inc VAT -
H&R Deep Coilover Kit for Audi TT 8N + A3 8L 50-110mm 2WD
TT / TTS/ TTRS, H&R Coilovers, A3 / S3 / RS3 H&R Deep Coilover Suspension£1,516.49 inc VAT£1,516.49 inc VAT -
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V
A3 / S3 / RS3 H&R Deep Coilover Suspension£1,469.00 – £3,399.00 inc VATH&R Deep Coilover Kit for : H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V 08/12> For A3 / S3 electronic damping models use delete kit p/n 93007-1 for RS3 use p/n 93008-1 These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThe Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,469.00 – £3,399.00 inc VAT -
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8P
A3 / S3 / RS3 H&R Deep Coilover SuspensionThis version of deep coilover uses the original top mounts and original drop links from your car. These are not included.£1,290.00 – £2,925.00 inc VAT£1,290.00 – £2,925.00 inc VAT -
H&R Deep Coilover Kit for Audi S1 8X Quattro
Suspension, H&R Coilover Suspension, Shop by Car, Audi, H&R CoiloversH&R Deep Coilover Kit for Audi S1 8X Quattro ( 170 KW ) 2014> for vehicles without electronic suspension control Lowered front axle from [mm]: 55 • Lowering front axle up to [mm]: 70 Lowered rear axle from [mm]: 40 • Lowered rear axle up to [mm]: 85 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,429.99 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,429.99 inc VAT -
H&R Deep Coilover Kit for Aston Martin Vantage: Special Low Vantage V12
Suspension, H&R Coilover Suspension, Shop by Car, Aston Martin, H&R CoiloversH&R Deep Coilover Kit for Aston Martin Vantage: Special Low Vantage V12 This Coilover System has been made with height adjustment and hardness adjustment to get the chassis lower than normal versions. The application is custom made to order so please contact us for a delivery timescale [email protected] This is a special low version coilover made by H&R Suspension in Germany.£4,159.99 inc VAT£4,159.99 inc VAT -
Muecke Audi A3 S3 8V Saloon wider wings 3cm ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )When lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£519.99 inc VAT- 1 set fiberglass front wing R+L for Audi A3 8v saloon widened 3 cm per side
- also fits facelift (8V2)
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- for saloon models only
£519.99 inc VAT -
Sold out
MQB Chassis Rear Brake Adapters
Shop by Product Type, Suspension, Shop by Car, Audi, Volkswagen, A3 / S3 / RS3, TT / TTS/ TTRS, Golf, Caddy, Scirocco / Corrado / Eos, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Brake AdaptionBrake caliper relocation adapters that allow fitment of an Vented S3/Golf R caliper to 356mm RS7 vented rear disc. A great upgrade when you already have a front 8 pot or 6 pot front wavey conversion and want the big rear disc look without the expense of a twin rear caliper set up.£220.00 – £870.00 inc VAT£220.00 – £870.00 inc VAT
