Audi 80

Filters

Showing all 9 results

Departments

Price Filter

9 products

  • £1,959.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm

    , , , , ,
    Audi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.
    This is a custom made “Deep” version coilover kit made to order.
    It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mm
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • Sold out
    £225.00 inc VAT

    Wheel hub conversion kit, front or rear Audi 80 S2 with 82mm wheel bearing ( 1 Pair )

    , ,
    ( currently out of stock until August 2204 please email us to add to the list ) Wheel hub conversion kit, front or rear Audi 80 S2 with 82mm wheel bearing ( for 75mm bearing please check our other listing ) Please email us your chassis number so we can check avialbility and fitment before ordering via [email protected] Wheel hub conversion kit to a bolt circle of 5x112 for the front axle of the Audi 80 and 90 series with an 82 wheel bearing diameter. The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. The wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter 1 [mm]:43mm Outer diameter 2 [mm]:131mm Required quantity:1 Width (mm]:92.3mm Installation side:Front axle on both sides Rim hole number:5 -hole Thread size:M14x1.5 Manufacturer approval:Special parts Hole circle Ø [mm]:112mm multi-part:two parts Unit of measure:Sentence Number of teeth:38 Admission type:subject to registration Fits the following vehicles : AUDI 80 B4 Avant (8C5) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 01/1996 - 0588 573 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Avant (8C5) 2.0 quattro 107 hp 1984 cc 09/1991 - 01/1996 - Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 Avant (8C5) 2.3 E quattro 133 hp 2309 cc 09/1991 - 01/1996 - 0588 547 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) 2.6 quattro 150 hp 2598 cc 09/1991 - 01/1996 - 0588 565 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) 2.8 quattro 174 hp 2771 cc 09/1991 - 01/1996 - 0588 549 Rim size [inch]: 16 inches AUDI 80 B4 Avant (8C5) S2 quattro 230 hp 2226 cc 09/1991 - 01/1996 - 0588 575 Rim size [inch]: 16 inches AUDI 80 B4 notchback (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 notchback (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 Rim size [inch]: 16 inches Chassis number (VIN) from: 8C-S-000 001 AUDI 80 B4 notchback (8C2) 2.3 E quattro 133 hp 2309 cc 09/1991 - 07/1995 - 0588 539 Rim size [inch]: 16 inches AUDI 80 B4 notchback (8C2) 2.6 quattro 150 hp 2598 cc 09/1991 - 07/1995 - 0588 563 Rim size [inch]: 16 inches AUDI 80 B4 notchback (8C2) 2.8 quattro 174 hp 2771 cc 09/1991 - 07/1995 - 0588 521 Rim size [inch]: 16 inches AUDI 80 B4 notchback (8C2) S2 quattro 230 hp 2226 cc 09/1991 - 07/1995 - 0588 574 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.3 quattro 136 hp 2309 cc 10/1988 - 12/1996 - 0588 433 0588 446 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.3 quattro 134 hp 2309 cc 10/1988 - 12/1996 - 0588 497 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.6 quattro 150 hp 2598 cc 10/1988 - 12/1996 - 0588 566 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) 2.8 quattro 174 hp 2771 cc 10/1988 - 12/1996 - 0588 523 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) S2 quattro 220 hp 2226 cc 10/1988 - 12/1996 - 0588 503 Rim size [inch]: 16 inches AUDI COUPE B3 (89, 8B3) S2 quattro 230 hp 2226 cc 10/1988 - 12/1996 - 0588 569 Rim size [inch]: 16 inches
    £225.00 inc VAT
    £225.00 inc VAT
  • £1,899.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 Type 89 ( B3 ) 2WD Coupe Saloon

    , , , , ,
    Audi H&R DEEP Coilovers – AUDI 80 Type 89 2WD models only  To fit : Coupe, Saloon, 10/86> ( For Cabrio / Coupe models 91 / 02 > please send us an enquiry ) For 4WD 89Q models please check GFW50503-5 / GFW50503-5-14 This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] lowering of between 70mm - 120mm is possible.
    £1,899.99 inc VAT
    £1,899.99 inc VAT
  • £2,219.99 inc VAT

    H&R Deep Coilover Kit for Audi S2 (B4 – 8C) / RS2 (P1) Avant 4WD

    , , , ,
    Audi H&R DEEP Coilovers – H&R Deep Coilover Kit for Audi S2 (B4 - 8C) / RS2 (P1) Avant 4WD 09/91>94 ( reference Rotiform Blue RS2 ) 
    This is a custom made “Deep” version coilover kit made to order.
    It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 70-120mm + very low
    £2,219.99 inc VAT
    £2,219.99 inc VAT
  • £1,959.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate 4WD 50-100mm:

    , , , , ,
    Audi H&R DEEP Coilovers – Audi 80 B4 Saloon + Estate 4WD ( 4cylinder models ) for 5+6 cylinder models please check  GFW50491-2-14SC
    This is a custom made “Deep” version coilover kit made to order.
    It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mm
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • £1,899.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 B4 Lim 2WD: 60-120mm

    , , , , ,
    Audi H&R DEEP Coilovers – Audi 80 B4 2WD 09/91>94 ( for 4wd models please check GFW50491-2-12SC ) This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 60mm – 120mm.
    £1,899.99 inc VAT
    £1,899.99 inc VAT
  • £1,899.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 Coupe Urquattro 4WD ( Type 85 ) : mm lowering to required level ( VA + HA strut housings required )

    , , , , ,
    Audi H&R DEEP Coilovers - AUDI QUATTRO (85) 2.1 Turbo This is a custom made "Deep" version coilover kit made to order. we require the original front and rear strut housings from the vehicle, These are shipped to H&R's factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]
    £1,899.99 inc VAT
    £1,899.99 inc VAT
  • £2,349.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 Type 89Q S2 4WD 60-120mm:

    , , , , ,
    H&R Deep Coilover Kit for Audi 80/90 Type 89Q S2 4WD 10/86>94 Lowering Range 60-120mm This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected]
    £2,349.99 inc VAT
    £2,349.99 inc VAT
  • £1,999.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 Type 81 ( B2 ) 2WD: mm lowering to required level

    , , , , ,
    Audi H&R DEEP Coilovers – AUDI 80 Type 81 2WD models only 
    This is a custom made “Deep” version coilover kit made to order. We require the original front and rear strut housings from the vehicle, These are shipped to H&R’s factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]
    £1,999.99 inc VAT
    £1,999.99 inc VAT