Gepfeffert V3 KW Coilover Suspension Audi RS6 RS7 C7 4G
£3,610.00 inc VAT
Gepfeffert KW coilover suspension V3 Audi RS6 / RS7 (4G/C7) with MR/DRC decommissioning kit
Lowering range 40-95mm.
The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.
|– damping technology adjustable in rebound|
|– damping technology adjustable in compression|
|– Stainless steel technology inox-line|
|– Individual, stepless lowering|
|– tested adjustment range|
|– ready-to-install complete solution|
|– High quality components for long service life|
|– complete documentation for easy use|
Note: The picture may differ from the delivered product
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.