H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 T28 T30 Cylindrical Clamp F: 100mm ( 130mm hub mod ) R: 130mm
H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 T28 T30 Cylindrical Clamp F: 100mm ( 130mm hub mod ) R: 130mm
£2,080.00 inc VAT
Transporter Deep Coilover made by H&R for StillStatic
The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty.
To fit Cylinder Hub type.
Example pictures shows our T32 with approx 10mm threads remaining in the front 9 not hub modded version ) and 20mm threads remaining in the rear without load.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 130mm ( bump stop modification required )
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm ( or 130mm with hub modding ) Rear : 130mm ( Bump stop modification required )
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :130mm ( Bump stop modification required )
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
Example coilover image shown, delivered product may vary.
Recommended Products
-
mbDESIGN – KV4
£1,999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,999.00 inc VAT -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made.
Recommended Products
-
mbDESIGN – KV4
£1,999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,999.00 inc VAT -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made.
H&R Deep Coilover Kit for Audi 80 Type 89Q S2 4WD 60-120mm:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R Coilovers
H&R Deep Coilover Kit for Audi 80/90 Type 89Q S2 4WD 10/86>94
Lowering Range 60-120mm
This is a custom made “Deep” version coilover kit made to order.
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14.
Please contact us for your requirements of the lowering range and vehicle type at [email protected]
£2,349.99 inc VAT
£2,349.99 inc VAT
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T25 T28 T30
Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW CoiloversGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Cylinder Clamp T25 T28 T30 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
| - damping technology adjustable in rebound |
| - damping technology adjustable in compression |
| - Stainless steel technology inox-line |
| - Individual, stepless lowering |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy use |
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,790.00 inc VAT