H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub Lowering F:100mm R:130mm
H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub Lowering F:100mm R:130mm
£2,080.00 inc VAT
Transporter Deep Coilover made by H&R for StillStatic
The kit is fixed damping. Comes with 2 years warranty.
To fit Clamp type hub.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm Rear : 130mm ( bump stop modification required )
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm Rear : 130mm ( Bump stop modification required )
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm Rear :130mm ( Bump stop modification required )
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load )
Example coilover image shown, delivered product may vary.
Coilover image may vary from actual product.
Made to Order (contact us for lead time)
Recommended Products
-
mbDESIGN – KV4
£1,999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,999.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT
Recommended Products
-
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
mbDESIGN – KV4
£1,999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,999.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made.
H&R Deep Coilover Kit for Audi 80 Type 81 ( B2 ) 2WD: mm lowering to required level
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R Coilovers
Audi H&R DEEP Coilovers – AUDI 80 Type 81 2WD models only
£1,999.99 inc VAT
This is a custom made “Deep” version coilover kit made to order. We require the original front and rear strut housings from the vehicle, These are shipped to H&R’s factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings.
Additional costs for shipping of the struts vary depending on your location.
Please contact us for your requirements of the lowering range and vehicle type at [email protected]
£1,999.99 inc VAT
H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 T28 T30 Cylindrical Clamp F: 100mm ( 130mm hub mod ) R: 130mm
Transporter H&R Deep Coilovers
Transporter Deep Coilover made by H&R for StillStatic
The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty.
To fit Cylinder Hub type.
Example pictures shows our T32 with approx 10mm threads remaining in the front 9 not hub modded version ) and 20mm threads remaining in the rear without load.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 130mm ( bump stop modification required )
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm ( or 130mm with hub modding ) Rear : 130mm ( Bump stop modification required )
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :130mm ( Bump stop modification required )
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
Example coilover image shown, delivered product may vary.
£2,080.00 inc VAT