H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub
£1,530.00 inc VAT
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Clamp type hub only not cylindrical strut clamp.
Contact us if your require fitting.
Recommended Products
-
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
mbDESIGN – KV4
£1,199.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Painted gray matt, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,199.00 inc VAT -
mbDESIGN – KV4
£2,099.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Glossy black lacquered front polished, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£2,099.00 inc VAT
Recommended Products
-
mbDESIGN – KV4
£1,199.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Painted gray matt, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,199.00 inc VAT -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
mbDESIGN – KV4
£2,099.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Glossy black lacquered front polished, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£2,099.00 inc VAT
MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1
MTS Suspension, Transporter MTS Coilover Suspension
Coilover Kit Volkswagen Transporter T5 / T6 / T6.1
Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion.
Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 -
Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15
Volkswagen Transporter T6.1
Series: street
Max. Axle Load FA: -1710 kg
Max. Axle Load RA: -1720 kg
Lowering FA: 30 - 70 mm
Lowering RA: 30 - 60 mm
Camber / top mount FA: no
Camber / top mount RA: no
Coilover Main Spring (Front): Spring rate (86 - 105 N/mm)
Coilover Helper Spring (Front): Spring rate (20 N/mm)
Coilover Main Spring (Rear): Spring rate (220 N/mm)
TUV Certificate: yes
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£699.00 – £729.00 inc VAT
| Installation manual: | Download installation manual |
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£699.00 – £729.00 inc VAT
StillStatic H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 / 28 / 30 Cylindrical Clamp F: 100mm R: 90mm
Transporter H&R Coilovers
Transporter Deep Coilover made by H&R for StillStatic, 100mm Lowering in the front , 90mm lowering in the rear.
The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty.
To fit Cylinder Hub type.
Example pictures shows our T32 with approx 10mm threads remaining in the front and 20mm threads remaining in the rear without load.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 90mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm ( or 130mm with hub modding ) Rear : 90mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :90mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
Example coilover image shown, delivered product may vary.
£2,030.00 inc VAT