Wheel hub conversion kit, VA or RA, VW T5, T6 Bus from to 5×112 (2 wheel hubs)
£149.99 inc VAT
Wheel hub conversion kit, VA or RA, VW T5, T6 Bus from to 5×112 (2 wheel hubs)
Wheel hub conversion kit to a bolt circle of 5 x 112, suitable for the front or rear axle of the VW T5 and T6 series.
The wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable.
The wheel hubs can be installed plug & play – without adapters etc.
The perfect solution for driving rims with a bolt circle of 5×112.
Scope of delivery:
2x wheel hub
The use of these wheel hubs on public roads usually requires
individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance.
Outer diameter [mm]:85mm
Required quantity:1
Installation side:Front axle, rear axle
Rim hole number:5 -hole
Flange Ø [mm]:149mm
Manufacturer approval:Special parts
Hole circle Ø [mm]:112mm
multi-part:two parts
Unit of measure:Sentence
Admission type:subject to registration
){kind=link}
StillStatic Define T Shirt – White
Shop by Product Type, Stillstatic Merchandise
Gepfeffert V1 KW Coilover VW Mk7 / 7.5 Golf with camber adjustable top mounts 2WD
Shop by Product Type, Suspension, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert CoiloverFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
| - Optimally adjusted in advance |
| - sporty and harmonious damping technology |
| - Stainless steel technology "inox-line" |
| - individually height adjustable |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy handling |
