Brake conversion kit, HA Rear VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100
New
  • 111.047.014SP!
  • 111.047.014SP!

Brake conversion kit, HA Rear VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100

£549.00 inc VAT

Brake conversion kit, HA, VW Golf 1/2/3, Polo 6N, compact bearing 256 mm, rear, conversion, bolt circle 5 x 100

Do you want to drive 5×100 rims but don’t want to change your original brakes?
Here is the perfect solution for you! This complete brake conversion kit from Special Parts for the rear axle of the VW Golf 1/2/3, Polo 6N (compact bearing 256 mm) is the answer to drive rims with a bolt circle of 5×100.
No adapter! No wheel spacers!

Scope of delivery:
2x brake disc
4x brake pad
2x axle pin
2x brake calliper
2x brake calliper bracket
2x wheel hub
2x conversion sleeve and accessories

The use of this brake conversion kit on public roads usually
requires an individual inspection in accordance with § 21 StVZO by an officially recognized expert. For the individual inspection, we therefore provide the required material certificate in the scope of delivery and here under the “Documents” tab.

Brake type:disc brake
Brake caliper design:brake caliper (1-piston)
Brake disc type:ventilated
braking system:LUCAS
Manufacturer restriction:TRW
Quality:cross-cut
Number of holes:5
Bolt circle diameter [mm]:100 mm
Outer diameter [mm]:120 mm, 256 mm
Width [mm]:62 mm
Brake disc thickness [mm]:22 mm
Inner diameter [mm]:30 mm
Piston diameter [mm]:38 mm
multi-part:multi-part
Unit of measure:Sentence
required quantity:1
Manufacturer approval:Special Parts
for brake disc diameter [mm]:256 mm
SKU: 111.047.014SP Categories: , , Tags: , , , ,
000

    Recommended Products

    • £295.00 inc VAT
      Add to cart

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      £295.00 inc VAT

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      Pre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of ​​the StVZO
      £295.00 inc VAT

    Recommended Products

    • £295.00 inc VAT
      Add to cart

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      £295.00 inc VAT

      Pre-assembled steering Hub, VA Front left + VW Right, VW GOLF II / III with ABS 5×100

      , ,
      Pre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of ​​the StVZO
      £295.00 inc VAT

    You might also like