H&R StillStatic Coilover Kit for VW Transporter T5 / T6 / T6.1
H&R StillStatic Coilover Kit for VW Transporter T5 / T6 / T6.1
£1,350.00 inc VAT
All New Coilover kit made exclusively for StillStatic by H&R Spezialfedern.
This new version offers moderate lowering ( not extreme like our popular deep kit ) while focused on superior road handling and comfort.
Combine this coilover with H&R Roll Bar kit for the best suspension set up experience!
Fixed rate damping with twin / monotube damping
Reworked uprated valved rear dampers
Fully height adjustable on both axles
H&R Transporter specific coilover springs
2 Years warranty
Lowering front 40-80mm
Lowering rear 40-70mm
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :80mm Rear :70mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Comes with 2 years manufacturers warranty.
Contact us if your require fitting.
Recommended Products
-
H&R Anti Roll Bars Transporter T5 T5.1 T6 T6.1
Shop by Car, TransporterH&R are the industry leader in high performance, quality suspension components. Be it on the street or on the track, H&R has become synonymous with consistent, proven suspension performance and quality. Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:£490.00 – £585.00 inc VAT- High-tensile steel
- Precise forged ends
- Powder coating
- Composite rubber bearing
- Over-/understeering adjustable
- Less body roll
- Higher agility
- Minimal loss of comfort
- Made in Germany
- Delivered with TÜV approval or ABE
-
mbDESIGN – KV4
£2,099.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Glossy black lacquered front polished, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£2,099.00 inc VAT -
mbDESIGN – KV4
£1,199.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Painted gray matt, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,199.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT
Recommended Products
-
mbDESIGN – KV4
£2,099.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Glossy black lacquered front polished, Wheel Size: 20", Wheel Width: 9, Offset (ET): ET42, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£2,099.00 inc VAT -
mbDESIGN – KV4
£1,199.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Painted gray matt, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£1,199.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
H&R Anti Roll Bars Transporter T5 T5.1 T6 T6.1
Shop by Car, TransporterH&R are the industry leader in high performance, quality suspension components. Be it on the street or on the track, H&R has become synonymous with consistent, proven suspension performance and quality. Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:£490.00 – £585.00 inc VAT- High-tensile steel
- Precise forged ends
- Powder coating
- Composite rubber bearing
- Over-/understeering adjustable
- Less body roll
- Higher agility
- Minimal loss of comfort
- Made in Germany
- Delivered with TÜV approval or ABE
Sold out
MQB Chassis Rear Brake Adapters
Shop by Product Type, Suspension, Shop by Car, Audi, Volkswagen, A3 / S3 / RS3, TT / TTS/ TTRS, Golf, Caddy, Scirocco / Corrado / Eos, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Brake Adaption
Brake caliper relocation adapters that allow fitment of an Vented S3/Golf R caliper to 356mm RS7 vented rear disc. A great upgrade when you already have a front 8 pot or 6 pot front wavey conversion and want the big rear disc look without the expense of a twin rear caliper set up.
£220.00 – £870.00 inc VAT
£220.00 – £870.00 inc VAT
H&R Race Coilover Kit for Audi TT 8J 60-120mm: Inc. adjustable damping for oe top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers
£2,207.99 inc VAT