MTS Technik Street Coilover Kit Cupra Formentor
MTS Technik Street Coilover Kit Cupra Formentor
£602.65 – £709.00 inc VAT
Coilover Kit Cupra Formentor
Coilover Kit MTS Technik for Cupra Formentor, lowering the front axle between 40 – 60 mm, and rear between 40 – 65 mm. Dedicated for the years of: 07/20 -, for the engine version: 2.0TSI 4Drive / 2.5 VZ5 4Drive / 2.0TDI 4Drive.
mm. Dedicated for the years of: 07/20 -, for the engine version: 2.0TSI 4Drive / 2.5 VZ5 4Drive / 2.0TDI 4Drive.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
35 – Rear thread adjustment block is mounted on the top.
39 -Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
52 – Only suitable for multilink suspension.
Sale
MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1 Cylindrical Clamp only
MTS Suspension, Transporter MTS Coilover Suspension
Coilover Kit Volkswagen Transporter T5 / T6 / T6.1 for models with cylindrical clamp only.
Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion.
Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 -
Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15
Volkswagen Transporter T6.1
Series: street
Max. Axle Load FA: -1710 kg
Max. Axle Load RA: -1720 kg
Lowering FA: 30 - 70 mm
Lowering RA: 30 - 60 mm
Camber / top mount FA: no
Camber / top mount RA: no
Coilover Main Spring (Front): Spring rate (86 - 105 N/mm)
Coilover Helper Spring (Front): Spring rate (20 N/mm)
Coilover Main Spring (Rear): Spring rate (220 N/mm)
TUV Certificate: yes
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£585.65 inc VAT
| Installation manual: | Download installation manual |
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£585.65 inc VAT
MTS Technik Lowering Spring Set / Complete Lowering Kit 2K/2KN Caddy Mk3 + Mk4
VW Caddy MTS Coilover kits, MTS Suspension
Lowering Springs Volkswagen Caddy III
Lowering Springs MTS Technik for Volkswagen Caddy III, lowering the front axle by 55 mm, and rear axle by 45 - 75 mm. Dedicated for the years of: 2004 - 05/20, for the engine version: 1.2TSI / 1.4 / 1.6 / 2.0 / 2.0SDI
Lowering Springs MTS Technik for Volkswagen Caddy IV, lowering the front axle by 55 mm, and rear axle by 45 - 75 mm. Dedicated for the years of: 05/15 - 05/20, for the engine version: 1.0TSI / 1.2TSI / 1.4TSI / 1.6.
2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Mounting on sports shock absorbers Springs with an aggressive lowering, requiring the use of sports shock absorbers with a shorter stroke.
Radical lowering
93 - Not suitable for 4x4 models.
M45 - We recommend to use shortend shock absorbers for this set.
M145 - We recommend to shorten the rear bumpstop 30mm from the bottom for better comfort.
M148 - The rear consists of an adjustable flip kit for the leaf springs, consisting of metal plates.
109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.
£99.00 – £529.00 inc VAT
£99.00 – £529.00 inc VAT