-
Gepfeffert KW V3 Coilovers Audi RSQ3 8U
Shop by Car, Audi, A3 / S3 / RS3, KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi RSQ3 type 8U - Lowering range 45-80mm , VW Inox Stainless Steel bodies including Adjustable top mounts Example Golf 7 GTI:£2,490.00 – £2,955.00 inc VAT- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,490.00 – £2,955.00 inc VAT -
H&R Deep Coilover Toyota GR Yaris 4WD 2020>
Toyota£1,830.00 – £3,600.00 inc VATStillStatic H&R Deep Coilover Toyota GR Yaris Type XPA1G 4WDLower version of the normal H&R coilover to allow more extreme lowering.Important wheel and tyre fitment must be checked, Choose from either fixed damping monotube or clubsport RSS damping adjsutable.Gallery pictures show normal H&R clubsport version and Yaris with GR with normal version coilover.£1,830.00 – £3,600.00 inc VAT -
H&R Deep Coilover Ford Escort RS Cosworth 4WD 1992>1996
FordStillStatic Deep H&R Race derived low version coilover in both front and rear for the ultimate in performance, road use and ride height. Fixed damping with modular race springs. Front lowering 50-110mm Rear lowering 40-90mm Example picture running 19" BBS Motorsport wheels. In stock 2 weeks from order.£2,100.00 inc VAT£2,100.00 inc VAT -
Gepfeffert GFW V3 Audi RSQ3 Typ 8U/F3 With camber adjustable top mount (60-110mm)
Shop by Car, Audi, Q3 / RSQ3, KW Gepfeffert Coilover Suspension£2,420.00 – £2,878.99 inc VATKW low Coilover suspension with hardness adjustment and support bearings from gepfeffert.com (by KW).
Adjustment range: 60-110mm lowering
V3: adjustable compression and rebound
Clamp diameter: 55mm
Suitable for the following models:
Audi RSQ3 (8U) 2013-2016 *
Audi RSQ3 (F3) from 2019
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.
Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,420.00 – £2,878.99 inc VAT -
H&R Deep Coilover Kit for VW Golf MK8 GTD, GTI, GTI Clubsport inc Adjustable Camber Top Mounts
Golf 7 / 7.5 / Mk8 H&R Deep Coilover Suspension£1,660.00 – £1,930.00 inc VATH&R Deep Coilover Kit for VW Golf MK8 2WD GTD GTi Clubsport inc Adjustable Camber Top Mounts
The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R’s own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
£1,660.00 – £1,930.00 inc VAT -
H&R Deep Coilover Hyundai i30N inc. Performance, Typ PDE Lowering F: 30-60mm / R: 25-65mm
Shop by Product Type, Suspension, Shop by Car, Hyundai, H&R CoiloversH&R Deep suspension are a performance low version of the monotube coilover enabling more lowering than normal versions for that ultra low stance, without sacrificing ride quality, handling or performance, the height adjustable coilovers can be set to you desired height for the perfect wheel fitment.£1,616.79 – £1,884.99 inc VAT£1,616.79 – £1,884.99 inc VAT -
H&R Deep Coilover Kit for Porsche 911 Typ 997 Turbo 4WD deep : incl. drop links
Suspension, H&R Coilover Suspension, Shop by Car, Porsche, H&R Coilovers, H&R Deep Coilovers Porsche£2,830.00 – £3,590.00 inc VAT£2,830.00 – £3,590.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F: Multilink rear ( 55mm strut clamp ) 50-110mm Uses OE top mount
Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F: Fixed Beam ( 50mm strut clamp ) 50-110mm Uses OE Top Mount
Golf Mk7 / Mk7.5 / Mk8, Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F: Multilink rear ( 50mm strut clamp ) 50-110mm Uses OE Top Mount
Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F with modular top mounts for fixed rear beam 50mm front hub 50-110mm
Leon£1,950.00 inc VAT£1,950.00 inc VAT -
H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8S
H&R Coilovers, Audi TT TTS TTRS H&R Deep Suspension£1,449.99 – £2,939.99 inc VATH&R Deep Coilover Kit for : Audi TT 8S 2Wd 08/12> Audi TTS TTRS 8S 4wd 2013> For electronic damping models use delete kit p/n 93005-1 for years upto 2014 and 93008-1 after 2014. H&R Deep Coilovers are made by H&R Special Suspension for StillStatic un the UK. These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,449.99 – £2,939.99 inc VAT
