-
MTS Technik Coilover Kit BMW 5 Series / E39 Saloon
MTS Suspension, 5 Series MTS Technik CoiloversCoilover Kit BMW 5 Series / E39 Sedan
Coilover Kit MTS Technik for BMW 5 Series / E39 Sedan, lowering only the front axle between 40-90 mm. Dedicated for the years of: 11/95 - 06/03, for the engine version: 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d.BMW 5 Series / E39 Sedan 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d11/95 - 06/03BMW 5 Series / E39 Kombi 520i / 523i / 525i / 528i / 530i / 540i / 520d /525d / 525tds / 530d09/96 - 06/04Series: street Housing: goldMax. Axle Load FA: -1105 kgMax. Axle Load RA: -1225 kgLowering FA: 40 - 90 mmLowering RA: 30 - 120 mmCamber / top mount FA: yesCamber / top mount RA: noCoilover Main Spring (Front): Spring rate (70 N/mm)Coilover Helper Spring (Front): Spring rate (20 N/mm)Coilover Main Spring (Rear): Spring rate (25 - 33,5 - 43 N/mm)TUV Certificate: noDownload information brochure: Download information brochure Download installation manual: Download installation manual 2 - Front and rear axle height adjustable (threaded shock absorber housing).8 - Not for 4x4.12 - Only for vehicles without EDC.21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.34 -Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry.£339.00 – £819.00 inc VAT