5 Series MTS Technik Coilovers

Filters

Showing all 2 results

Departments

Price Filter

2 products

  • £839.00 inc VAT
    Select options

    MTS Technik Coilover kit BMW 5 Series / E34 Saloon

    ,

    Coilover Kit BMW 5 Series / E34 Sedan

    Coilover Kit MTS Technik for BMW 5 Series / E34 Sedan, lowering the front axle between 20 - 95 mm, and rear between 20 - 85 mm. Dedicated for the years of: 01/88 - 12/95, for the engine version: 518i / 520i / 525i / 530i / 535i / 540i / 524td / 525tds / M5.  
    2 years warranty 2 year warranty with no mileage limit to confirm high quality.
    High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
    Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
    Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
    Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
    Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving.
    hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
    Independent height adjustment at the bottom mounting Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
    Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
    Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
    2 - Front and rear axle height adjustable (threaded shock absorber housing).
    8 - Not for 4x4.
    9 - Only for vehicles without NIVO / OEM pneumatic suspension.
    21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
    24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
    26 - Independent height adjustment at the lower brackets on the front dampers.
    28 - Set includes 2x upper "camber plates" on the front axle.
    29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
    33 - Including M-Technik.
    £839.00 inc VAT
    £839.00 inc VAT
    Select options
  • £339.00 – £819.00 inc VAT
    Select options

    MTS Technik Coilover Kit BMW 5 Series / E39 Saloon

    ,

    Coilover Kit BMW 5 Series / E39 Sedan

    Coilover Kit MTS Technik for BMW 5 Series / E39 Sedan, lowering only the front axle between 40-90 mm. Dedicated for the years of: 11/95 - 06/03, for the engine version: 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d.
    BMW 5 Series / E39 Sedan 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d
    11/95 - 06/03
    BMW 5 Series / E39 Kombi 520i / 523i / 525i / 528i / 530i / 540i / 520d /525d / 525tds / 530d
    09/96 - 06/04
    Series: street
    Housing:
    gold
    Max. Axle Load FA:
    -1105 kg
    Max. Axle Load RA:
    -1225 kg
    Lowering FA:
    40 - 90 mm
    Lowering RA:
    30 - 120 mm
    Camber / top mount FA:
    yes
    Camber / top mount RA:
    no
    Coilover Main Spring (Front):
    Spring rate (70 N/mm)
    Coilover Helper Spring (Front):
    Spring rate (20 N/mm)
    Coilover Main Spring (Rear):
    Spring rate (25 - 33,5 - 43 N/mm)
    TUV Certificate:
    no
    Download information brochure: Download information brochure
    Download installation manual: Download installation manual
     
    2 - Front and rear axle height adjustable (threaded shock absorber housing).
    8 - Not for 4x4.
    12 - Only for vehicles without EDC.
    21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
    24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
    34 -Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).
    73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
      2 year warranty with no mileage limit to confirm high quality. Suspension components characterized by increased corrosion resistance and made of the highest quality materials. The use of twin-tube technology guarantees stable shock absorber performance. Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. Coilover springs made by Eibach, the world leader in the sport springs industry.
    £339.00 – £819.00 inc VAT
    £339.00 – £819.00 inc VAT
    Select options