-
HP Drivetech Air Suspension Kit for Volkswagen Transporter – T6 T6.1 (2015>) T30
Transporter, Drivetech - Air Suspension£3,079.00 inc VAT
£3,079.00 inc VAT -
Sold out
Transporter T5 / 6 / 6.1 356mm Rear Disc Upgrade
Shop by Product Type, Shop by Car, Transporter, Brake KitsRear 356mm x 22mm Big Brake Disc kit Kit Includes New OE Redrilled 356mm Discs New Carriers and adapters New hardware Discs spacer All parts are supplied in raw OE finishes, an example of a completed installed kit is shown with the yellow powder coat finish. We also have Front Transporter brake kit options 365mm with Porsche 6 pot Cayenne caliper, or 400mm SQ7 kit with 6 pot akebono caliper.£750.00 inc VAT£750.00 inc VAT -
MB Design – KV4 Wheels Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, TransporterMB Design - KV4 Wheels available fitment : 8.5" x 18" ( Load Rated : 1008 KG per wheel ) 8.5 x 19" ( Load Rated 850 KG Per Wheel ) 9" x 20" ( Load Rated : 965 KG per wheel ) Offset : ( custom offset and finish available by enquiry ) PCD : 5 x 120 Direct to Bore 65.1 fitment. Concave design. Big brake friendly. Priced per wheel. High Quality German Made. ( On Back order : Made to Order approx 6 weeks enquire via [email protected] )£395.00 – £545.00 inc VAT£395.00 – £545.00 inc VAT -
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T25/28/30 Cylindrical Strut Clamp
Transporter H&R Deep Coilovers£1,530.00 inc VAT
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Cylindrical hub only not clamp.
Contact us if your require fitting. £1,530.00 inc VAT -
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T25 T28 T30
Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW Coilovers£2,790.00 inc VATGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Cylinder Clamp T25 T28 T30 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,790.00 inc VAT -
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T32
Shop by Car, Volkswagen, Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW Coilovers£2,790.00 inc VATGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Clamp brackett T32 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,790.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. £725.00 – £875.00 inc VAT -
HP Drivetech Air Suspension Kit for Volkswagen Transporter – T6 T6.1 (2015> ) T32
Transporter, Drivetech - Air Suspension£3,079.00 inc VAT £3,079.00 inc VAT -
Sold out
HP Drivetech Air Suspension Kit for Volkswagen Transporter – T5 (2003-2015) T32
Transporter, Drivetech - Air Suspension£3,079.00 inc VAT £3,079.00 inc VAT
