GotTheDrop Sticker
GotTheDrop Sticker
£3.50 inc VAT
Have you #GotTheDrop on Air or Coils by StillStatic ? Then represent and let the world know !
Size 12cm x 9cm sticker perfect for front or rear window corner.
Pictured: Oil Slick and Satin black
Gepfeffert V3 KW Coilover Suspension Audi RS6 RS7 C7 4G
Shop by Product Type, Suspension, A6 / S6 / RS6, A7 / S7 / RS7, KW Gepfeffert Coilover SuspensionGepfeffert KW coilover suspension V3 Audi RS6 / RS7 (4G/C7) with MR/DRC decommissioning kit
Lowering range 40-95mm.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
| – damping technology adjustable in rebound |
| – damping technology adjustable in compression |
| – Stainless steel technology inox-line |
| – Individual, stepless lowering |
| – tested adjustment range |
| – ready-to-install complete solution |
| – High quality components for long service life |
| – complete documentation for easy use |
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£3,610.00 inc VAT
Gepfeffert V1 KW Coilover VW Mk7 / 7.5 Golf with camber adjustable top mounts 2WD
Shop by Product Type, Suspension, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert CoiloverFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
| - Optimally adjusted in advance |
| - sporty and harmonious damping technology |
| - Stainless steel technology "inox-line" |
| - individually height adjustable |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy handling |
£1,730.00 inc VAT