MTS Technik Street Gold Coilover Kit BMW 3 SERIES / E36 COMPACT / Z3 Coupe / Z3 Roadster

Sale

MTS Technik Street Gold Coilover Kit BMW 3 SERIES / E36 COMPACT / Z3 Coupe / Z3 Roadster

Name: MTS Technik Street Gold Coilover Kit BMW 3 SERIES / E36 COMPACT / Z3 Coupe / Z3 Roadster
SKU: MTSGWBM02
Availability: InStock

£483.65 – £909.00 inc VAT

Coilover Kit BMW 3 Series / E36 Compact

Coilover Kit MTS Technik for BMW 3 Series / E36 Compact, lowering the front axle between 20 – 90 mm on original top mounts ( additional 20mm with camber adjustable top mounts ), and rear between 10 – 40 mm. Dedicated for the years of: 01/94 – 08/00, for the engine version: 316i / 316g / 318ti / 318tds / 323ti

Series:	street
Max. Axle Load FA:	-900 kg
Max. Axle Load RA:	-1040 kg
Lowering FA:	20 – 90 mm
Lowering RA:	10 – 40 mm
Camber / top mount FA:	no
Camber / top mount RA:	no
Coilover Main Spring (Front):	Spring rate (60 N/mm)
Coilover Helper Spring (Front):	Spring rate (20 N/mm)
Coilover Main Spring (Rear):	Spring rate (46 – 90,1 N/mm)
TUV Certificate:	yes

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).

21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.

24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

33 – Including M-Technik.

58 – For models up to 11/91 and M3 – the shortened sway bar link MTSLS08 shall be purchased separately.

73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.

2 year warranty with no mileage limit to confirm high quality.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

The use of twin-tube technology guarantees stable shock absorber performance.

Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.