MTS Technik Street Coilover Kit Volkswagen Golf 8 Hatchback 2WD + 4WD
MTS Technik Street Coilover Kit Volkswagen Golf 8 Hatchback 2WD + 4WD
£569.00 – £829.00 inc VAT
Coilover Kit Volkswagen Golf VIII Hatchback
Coilover Kit MTS Technik for Volkswagen Golf VIII Hatchback, lowering both axles between 35 – 70 mm. Dedicated for the years of: 11/12 -, for the engine version: 1.0 TSI / 1.0 eTSI / 1.5 TSI / 1.5 TGI / 1.5 eTSI / 2.0 GTI / 2.0 GTI Clubsport / 2.0 TSI R 4motion / 2.0 TDI / 2.0 TDI 4motion / 2.0 TDI GTD.
| Series: | street |
 Max. Axle Load FA: |
1081 – 1180 kg
|
| Max. Axle Load RA: |
-1110 kg
|
| Lowering FA: |
35 – 70 mm
|
| Lowering RA: |
35 – 70 mm
|
| Camber / top mount FA: |
no
|
| Camber / top mount RA: |
no
|
| Coilover Main Spring (Front): |
Spring rate (30 – 55 N/mm)
|
| Coilover Main Spring (Rear): |
Spring rate (80 N/mm)
|
| Coilover Helper Spring (Rear): |
Spring rate (20 N/mm)
|
| Info: |
multilink rear suspension
|
| TUV Certificate: |
yes
|
| Download information brochure: | Download information brochure |
| Download installation manual: | Download installation manual |
| Download TUV Certificate: | Download TUV Certificate |
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
MTS Technik Coilover kit BMW 5 Series / E34 Saloon
MTS Suspension, 5 Series MTS Technik CoiloversCoilover Kit BMW 5 Series / E34 Sedan
Coilover Kit MTS Technik for BMW 5 Series / E34 Sedan, lowering the front axle between 20 - 95 mm, and rear between 20 - 85 mm. Dedicated for the years of: 01/88 - 12/95, for the engine version: 518i / 520i / 525i / 530i / 535i / 540i / 524td / 525tds / M5.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.2 - Front and rear axle height adjustable (threaded shock absorber housing).
8 - Not for 4x4.
9 - Only for vehicles without NIVO / OEM pneumatic suspension.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
26 - Independent height adjustment at the lower brackets on the front dampers.
28 - Set includes 2x upper "camber plates" on the front axle.
29 - The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
33 - Including M-Technik.
£839.00 inc VAT
MTS Technik Coilover Kit BMW 5 Series / E39 Saloon
MTS Suspension, 5 Series MTS Technik CoiloversCoilover Kit BMW 5 Series / E39 Sedan
Coilover Kit MTS Technik for BMW 5 Series / E39 Sedan, lowering only the front axle between 40-90 mm. Dedicated for the years of: 11/95 - 06/03, for the engine version: 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d.BMW 5 Series / E39 Sedan 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d
11/95 - 06/03
BMW 5 Series / E39 Kombi 520i / 523i / 525i / 528i / 530i / 540i / 520d /525d / 525tds / 530d
09/96 - 06/04
| Series: | street |
| Housing: |
gold |
 Max. Axle Load FA: |
-1105 kg |
| Max. Axle Load RA: |
-1225 kg |
| Lowering FA: |
40 - 90 mm |
| Lowering RA: |
30 - 120 mm |
| Camber / top mount FA: |
yes |
| Camber / top mount RA: |
no |
| Coilover Main Spring (Front): |
Spring rate (70 N/mm) |
| Coilover Helper Spring (Front): |
Spring rate (20 N/mm) |
| Coilover Main Spring (Rear): |
Spring rate (25 - 33,5 - 43 N/mm) |
| TUV Certificate: |
no |
| Download information brochure: | Download information brochure |
| Download installation manual: | Download installation manual |
2 - Front and rear axle height adjustable (threaded shock absorber housing).
8 - Not for 4x4.
12 - Only for vehicles without EDC.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
34 -Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£339.00 – £819.00 inc VAT