-
mbDESIGN – LV1
mbDESIGN WheelsThe MB Design "LV1" wheel is a one piece wheel with quality classic looking 2 piece design using real hardware, the Y spoke design is a subtle and classy look without the cost of a multi piece wheel, TUV approved and made in germany in the MB Design factory all finishes are to the highest quality. However if you want a true multi-piece wheel we also offer the "LV1.2" with a seperate outer rim. You can customise the finishes and hardware by getting in touch with us, this wheel also accepts the centre lock look cap by MB Design. Available in 17"-20" for all usual pcd fitments and in various widths. 7 x 17" 7.5 x 18" 8.5 x 19" 8.5 + 9.0 x 20" " On back order " describes the production and delivery timescale of 6 weeks from date of order ( estimated ) , please send us an enquiry if you are unsure of the lead time or the vehicle fitment you require.£1,499.00 – £2,260.00 inc VAT£1,499.00 – £2,260.00 inc VAT -
mbDESIGN – TURBO S
mbDESIGN WheelsmbDESIGN Aluminium wheel Flowform TURBO S sold as a set of 4, the one piece wheel has real hardware. Contact us via email [email protected] for custom options or if you do not see your fitment. Contact us for custom hardware and cap options.£1,820.00 – £2,200.00 inc VAT£1,820.00 – £2,200.00 inc VAT -
£1,620.00 – £2,000.00 inc VAT
-
mbDESIGN – LV1.2
mbDESIGN WheelsThe MB Design LV1.2 is a real 2 Piece wheel design with the centre and rim section as one piece and the with outer section as the second piece, Various colour options are available in addition to those listed. It is possible to have different finish hardware also. Price is for a set of 4 wheels. Available sizes 8.5 x 19" with 1.0" outer lip 8.5 x 20" with 0.5" outer lip Further outer lip sizes are available priced on enquiry. Staggered options also available. Please contact us to help with the finish selections via [email protected] These are a custom made to order in approx 8 week timescale once so special order terms and condition apply.£3,550.00 – £4,500.00 inc VAT£3,550.00 – £4,500.00 inc VAT -
mbDESIGN – SF1 Forged
mbDESIGN WheelsThe SF1 forged wheel is available from 19" to 24 inches. Bolt pcd patterns 5x100 to 5x132 as well as centre lock for Porsche vehicles and are TÜV tested.
A special feature is the application for the Porsche 992 with exactly the same dimensions and offset as the standard wheel.
Multiple colour finishes and custom finishes. Price per wheel. All wheels are made to order and built on an individual basis so please contact us for a lead time. Available for Audi , Volkswagen , BMW, Mercedes- Benz, Porsche If you are unsure of the fitment for your vehicle, or don't see a size and fitment listed for your vehicle please contact us [email protected]£630.00 – £805.00 inc VAT -
£POA
-
£POA
-
£POA
-
£POA
-
£1,149.00 – £1,949.00 inc VAT
-
£1,199.00 – £1,599.00 inc VAT
-
mbDESIGN – MF1
mbDESIGN WheelsThe mbDESIGN MF1 wheel is a forged magnesium wheel that is well known for racing.
A special forging technology of the mbDESIGN magnesium rims brings numerous advantages. Made from the high-tech material magnesium, wheels combine maximum stability with minimum weight. They are up to 30 percent lighter than conventional cast aluminum wheels. So the filigree MF1 wheel in the dimension 8.0 × 19 inches ET50 weighs just 7.15 kg - with a carrying capacity of 580 kg, this weight is record-breaking. The wheels are not suitable for extreme winter operation and should therefore only be driven in summer. When cleaning, you have to pay nothing and maintain the magnesium wheel like an aluminum rim. However, as with an aluminum wheel, acidic rim cleaners should be avoided. The low weight of the forged magnesium rims leads to a reduction of the unsprung mass, resulting in noticeably improved driving dynamics and a smoother running behavior of the entire vehicle. In addition, the fuel consumption and CO2 emissions of the vehicles are reduced, with E-cars, the range thus increases. The Forged Magnesium rims by mbDESIGN are offered cheaper than some aluminum forged wheels. The reason for this is a new type of fully automated production geared towards high-speed and mass production. The forged magnesium rim MF1 in 8.0 × 19 inches is TÜV tested and is even offered ABE. This is the case with no other manufacturer.£1,849.00 – £3,750.00 inc VAT -
£749.00 – £1,349.00 inc VAT
-
£1,299.00 – £2,049.00 inc VAT
-
£1,549.00 – £2,449.00 inc VAT
-
£899.00 – £2,880.00 inc VAT
-
£1,249.00 – £2,049.00 inc VAT
-
£2,399.00 – £3,049.00 inc VAT
-
£2,099.00 – £2,699.00 inc VAT
-
£1,399.00 – £2,949.00 inc VAT
-
£1,249.00 – £2,999.00 inc VAT