H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T25/28/30 Cylindrical Strut Clamp
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T25/28/30 Cylindrical Strut Clamp
£1,530.00 inc VAT
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Cylindrical hub only not clamp.
Contact us if your require fitting.
Recommended Products
-
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
mbDESIGN – KV4
£999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£999.00 inc VAT
Recommended Products
-
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, Transporter£725.00 – £875.00 inc VAT
MB Design - Forged SF1 Wheels 9J x 20" 5 x 120
Concave design. Big brake friendly.
Priced per wheel.
Offset : Et 30 / 35 / 42
( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 )
PCD : 5 x 120
Load Rated 950 KG per wheel
High Quality German Made. -
mbDESIGN – KV4
£999.00 inc VAT
mbDESIGN – KV4
Wheel Finish: Lacquered light silver glossy, Wheel Size: 18", Wheel Width: 8.5, Offset (ET): ET45, Bolt Pattern (PCD): 5x120, Centre Bore: 65.1£999.00 inc VAT -
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
£318.99 inc VAT
H&R Electronic Damping Delete Kit – VW Bus T6 – 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)
Vehicle: VW Bus T6 - 7HC, 7HCA, 7HM, 7HMA, 7HK, 7J0, 7HKX0 (2015>)£318.99 inc VAT
MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1
MTS Suspension, Transporter MTS Coilover Suspension
Coilover Kit Volkswagen Transporter T5 / T6 / T6.1
Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion.
Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 -
Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15
Volkswagen Transporter T6.1
Series: street
Max. Axle Load FA: -1710 kg
Max. Axle Load RA: -1720 kg
Lowering FA: 30 - 70 mm
Lowering RA: 30 - 60 mm
Camber / top mount FA: no
Camber / top mount RA: no
Coilover Main Spring (Front): Spring rate (86 - 105 N/mm)
Coilover Helper Spring (Front): Spring rate (20 N/mm)
Coilover Main Spring (Rear): Spring rate (220 N/mm)
TUV Certificate: yes
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£699.00 – £729.00 inc VAT
| Installation manual: | Download installation manual |
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£699.00 – £729.00 inc VAT
Gepfeffert V3 KW Coilover VW Transporter T5 T6 T6.1 T25 T28 T30
Transporter, KW Gepfeffert Coilover Suspension, Transporter T5 T6 Gepfeffert KW CoiloversGepfeffert KW V3 coilover for Transporter
Fits transporter T5 T6 T6.1 2wd and 4wd models with Cylinder Clamp T25 T28 T30 For more stability or ride comfort. With adjustable compression and rebound damping. The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit. Lowering range 80-140mm. Special order item terms and conditions apply. ( These are a custom made to order item and can take 6-8 weeks for delivery please contact us before purchase ).The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
| - damping technology adjustable in rebound |
| - damping technology adjustable in compression |
| - Stainless steel technology inox-line |
| - Individual, stepless lowering |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy use |
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,790.00 inc VAT