-
H&R Deep Coilover Kit for Seat Leon 5F: Multilink rear ( 55mm strut clamp ) 50-110mm Uses OE top mount
Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F: Fixed Beam ( 50mm strut clamp ) 50-110mm Uses OE Top Mount
Golf Mk7 / Mk7.5 / Mk8, Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F: Multilink rear ( 50mm strut clamp ) 50-110mm Uses OE Top Mount
Leon£1,460.00 inc VAT£1,460.00 inc VAT -
H&R Deep Coilover Kit for Seat Leon 5F with modular top mounts for fixed rear beam 50mm front hub 50-110mm
Leon£1,950.00 inc VAT£1,950.00 inc VAT -
H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8S
Audi TT TTS TTRS H&R Deep Suspension, H&R Coilovers£1,449.99 – £2,939.99 inc VATH&R Deep Coilover Kit for : Audi TT 8S 2Wd 08/12> Audi TTS TTRS 8S 4wd 2013> For electronic damping models use delete kit p/n 93005-1 for years upto 2014 and 93008-1 after 2014. H&R Deep Coilovers are made by H&R Special Suspension for StillStatic un the UK. These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,449.99 – £2,939.99 inc VAT -
Sold out
B5 S4/RS4 Twin Rear caliper adapters for fitting R8 4 pot caliper , R8 handbrake caliper with 356mm disc ( not inc ).
Brake Adaption, Shop by Car, Suspension, Shop by Product TypeThe kit includes steel brackets for main brake caliper and handbrake caliper, fitting bolts, handbrake caliper relocation adapter for brake line, new brake lines. You will need R8 4 pot caliper and R8 handbrake caliper with R8 disc these are not included. These items are made to order Please contact us for a manufacturing timescale at [email protected]£620.00 inc VAT£620.00 inc VAT -
H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8J
Audi TT TTS TTRS H&R Deep Suspension, H&R Coilovers£1,290.00 – £2,925.00 inc VAT
£1,290.00 – £2,925.00 inc VAT -
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub
Transporter H&R Coilovers£1,530.00 inc VAT
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Clamp type hub only not cylindrical strut clamp.
Contact us if your require fitting. £1,530.00 inc VAT -
H&R RSS Clubsport Coilover Kit adjustable damping for BMW 3 Series E30 M3, Customers Original Struts Required to build this kit. Please contact us.
RSS Race Coilover Suspension, M Series, 3 Series, BMW, Shop by Car, H&R Coilover Suspension, Suspension[embed]https://youtu.be/wMG5GhVIR5M[/embed]£2,335.00 inc VAT£2,335.00 inc VAT -
H&R RSS Clubsport Coilover Kit fixed damping for BMW 3 Series E30 M3, Customers Original Struts Required to build this kit. Please contact us.
M Series, 3 Series, BMW, Shop by Car, H&R Coilover Suspension, Suspension, RSS Race Coilover Suspension[embed]https://youtu.be/wMG5GhVIR5M[/embed]£1,635.00 inc VAT£1,635.00 inc VAT -
H&R Transporter Deep Harder Rear Damper for Heavier Load ( Price Individually )T5/6 T25-30/32
Transporter H&R CoiloversH&R uprated Deep rear damper made for StillStatic. Early version of deep coilovers had a softer rear damper setting which when carrying load could feel too soft, this uprated damper is now supplied with all new deep kits and can be purchased separately. Replacement dampers of the original version are still available p/n 4868500-R1 / 1 This uprated damper is built for vehicles that carry weight such as work vans and heavy campers, the damping rate is firmer than the oe setting of normal Coilovers. We run this damper on our own T6.1 Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )£240.00 inc VAT£240.00 inc VAT -
StillStatic H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub Lowering F:100mm R:130mm
Transporter H&R Coilovers£2,080.00 inc VAT
Transporter Deep Coilover made by H&R for StillStatic
The kit is fixed damping. Comes with 2 years warranty.
To fit Clamp type hub.
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 100mm Rear : 130mm ( bump stop modification required )
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 100mm Rear : 130mm ( Bump stop modification required )
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :100mm Rear :130mm ( Bump stop modification required )
*Note For vehicles with Electronic dampers use delete kit 93071-1
Contact us if your require fitting.
( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load )
Example coilover image shown, delivered product may vary.
Coilover image may vary from actual product. £2,080.00 inc VAT
