-
SRS-Tec Wide Wings GT, VW Up! ( with indicator hole )
SRS-TecSRS-Tec wide fender set GT left & right (unpainted) 2,5cm wider then the stock fenders. Ideal for Airride or deep Threaded Suspension and the Assembly Of up to 18 Inch Wheels. Gallery pictures show wings both with and without indicator holes£449.99 inc VAT£449.99 inc VAT -
SRS Rear Diffuser GT, Audi TT 8J
SRS-TecDescription
Manufacturer SRS-Tec Article Rear diffuser GT Version Exhaust cut-out on the driver’s side Area of use Make: AUDI Modell: TT Type: 8J Model Year: 04/2006 – 03/2014 Submodell: Roadster & Coupe Engine: AllDetails
Notice Only for the standart TT 8J rear bumper, not fit for RS, S-Line bumper Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM rear diffuser No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser GT (unpainted) – TÜV report – Fitting instructions£229.99 inc VAT -
SRS Rear Diffuser R20/R, VW Golf VI ( For R Bumper only )
SRS-TecDescription
Manufacturer SRS-Tec Article Rear diffuser R20/R Version cut-out for R20 exhaust Area of use Make: Volkswagen Modell: Golf Type: 1K (MK6) Model Year: from 10/2008 Submodell: 2-Door / 4-Door (not for Golf 6 Plus, Station Wagon) Engine: AllDetails
Notice Only for the standart Golf 6 R20 rear bumper, not for GTI/GTD bumper Expert’s report German TÜV report Material High quality GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Bolted to the VW Golf VI R20 rear bumper. No modifications required. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R20/R (unpainted) – TÜV report – Fitting material£249.99 inc VAT -
SRS Rear Diffuser Cup, VW Polo 9N3
Shop by Car, Polo, SRS-TecDescription
Manufacturer SRS-Tec Article Rear Diffuser Cup Area of Use Vehicle manufacturer: VW Modell: Polo IV Type: 9N3 Model Year: 03/2005 – 05/2009 Submodell: all< Notice Nur passend für die Original VW Polo 9N3 Cup Heckstoßstange.Details
Notice Only for the original VW Polo 9N3 Cup rear bumper. Expert’s report German TÜV report StVZO § 19.2, no Registration required Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the OEM rear bumper. No Modifications requiredIncluded
SRS-Tec rear diffuser Cup (unpainted) – TÜV report – Mounting material – Assembly Instructions£199.99 inc VAT -
SRS Rear Diffuser GT, VW Up!
Shop by Car, Volkswagen, Up, SRS-TecDescription
Manufacturer SRS-Tec Article Rear diffuser GT Area of use Make: Volkswagen Modell: up! Type: W120 Model Year: from 12/2011 Submodell: All Engine: AllDetails
Special feature The Rear diffuser is very easy paintable, has a excellent quality and a perfect fitment. Expert’s report TÜV report according to German §19.2 StVZO Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the OEM rear bumper, no modifications necessary. Not for rear bumper with PDC-Sensors.Included
SRS-Tec Rear diffuser GT (unpainted) – TÜV report – Mounting instructions – Mounting material made to order approx 4 weeks delivery.£159.99 inc VAT -
SRS Rear Diffuser R-Style V6, VW Bora
SRS-TecDescription
Manufacturer SRS-Tec Article Rear Diffuser R-Style Version V6 Exhaust Area of Use Vehicle manufacturer: VW Modell: Bora/Jetta Type: MK IV (1J) Model Year: 1998 – 2005 Submodell: All Engine: AllDetails
Notice The rear diffuser fit only with the SRS-Tec R-Style rear bumper or the OEM R-Line rear bumper. This version is for the V6 exhaust. Special feature The diffuser is very easy paintable, has a excellent quality and a perfect fitment. Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM bumper, no modifications necessary. Comes ready to prep, prime and paint.Included
SRS-Tec Rear diffuser R-Style V6 (unpainted) – Mounting material Notice The rear bumper is not part of the delivery£159.99 inc VAT -
mbDESIGN – TURBO S
mbDESIGN WheelsmbDESIGN Aluminium wheel Flowform TURBO S sold as a set of 4, the one piece wheel has real hardware. Contact us via email [email protected] for custom options or if you do not see your fitment. Contact us for custom hardware and cap options.£1,820.00 – £2,200.00 inc VAT£1,820.00 – £2,200.00 inc VAT -
£1,620.00 – £2,000.00 inc VAT
-
mbDESIGN – LV1.2
mbDESIGN WheelsThe MB Design LV1.2 is a real 2 Piece wheel design with the centre and rim section as one piece and the with outer section as the second piece, Various colour options are available in addition to those listed. It is possible to have different finish hardware also. Price is for a set of 4 wheels. Available sizes 8.5 x 19" with 1.0" outer lip 8.5 x 20" with 0.5" outer lip Further outer lip sizes are available priced on enquiry. Staggered options also available. Please contact us to help with the finish selections via [email protected] These are a custom made to order in approx 8 week timescale once so special order terms and condition apply.£3,150.00 – £4,450.00 inc VAT£3,150.00 – £4,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Volkswagen Transporter – T6 T6.1 (2015>) T30
Transporter, Drivetech - Air Suspension£3,079.00 inc VAT -
HP Drivetech Air Suspension Kit for Volkswagen MK5 Golf R32 – 5/1K (2003-2008)
Drivetech - Air Suspension, Golf Mk4 / Mk5 / Mk6 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for BMW 5 – F10 (2010-2017
BMW, 5 Series, Drivetech - Air Suspension£2,550.00 inc VAT -
Muecke 3cm Wider Wings Audi RS3 8V ( Inc Facelift )
Muecke-Carbon & Bodywork Parts ( Wider Wings ), A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air SuspensionWhen lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£449.00 inc VAT- 1 set fiberglass fender Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- not suitable for saloon
- fits both pre facelift and facelift
£449.00 inc VAT -
£720.00 inc VAT
-
H&R Deep Coilover Kit for VW Polo 5 6R / 6C1 ( 90mm )
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. Lowered front axle from [mm]: 60 • Lowering front axle up to [mm]: 80 Lowered rear axle from [mm]: 60 • Lowered rear axle up to [mm]: 90 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,249.99 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,249.99 inc VAT -
H&R Deep Coilover Kit for Mazda 3 MPS Typ BL Low version F: 40-70mm / R: 40-60:
Suspension, H&R Coilover Suspension, Shop by Car, Mazda, H&R Coilovers£1,761.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm Fixed damping:
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover SuspensionH&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm fixed damping Fits RS6 C6 4F C7 4G£1,885.00 inc VAT£1,885.00 inc VAT -
Muecke VW Polo 6R / 6C widened wing 2.4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set VW Polo 6R / 6C wing GFK 2.4 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke VW Jetta MK5 widened wing 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set left & right Jetta wing GFK 2,5 cm widened per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke VW MK4 Golf 4 widened wings 2.9cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set Golf 4 widened wings (2.9 cm per side) made of GRP including shipping within Germany
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke VW Corrado G60 widened wing 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set GFK VW Corado G 60 wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke VW Caddy Mk3 + VW Touran widened wing 2.5 cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set left & right widened mudguard 2.5 cm per side
- from BJ, 2010
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke VW Rallye Golf widened wings 2.3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set left & right widened wings made of fiberglass 2.3 cm per side
- suitable for Rallye Golf
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke Audi A3 8P facelift widened wings 1.5 cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- Audi A3 8P facelift wing GFK 1.5 cm wider
£469.99 inc VAT