-
Muecke Audi A3 8P > 2009 clean ( no indicator ) widened wings 4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- Audi A3 8P wing GFK 4 cm wider per side
- clean, without blinkers
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (Einzelabhnahme)
- (shown in picture carbon wing 1100, - Euro)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke Audi TT 8J widened wings 3cm
TT / TTS/ TTRS, Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set of fiberglass Audi TT 8 J wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£449.00 inc VAT -
Muecke Audi TT 8S widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set left & right widened wings 3cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke Audi RS3 8P widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set left & right widened wings made of GRP 3cm per side
- unpainted, surface gelcoat gray
- only fitting Audi RS3 8P
- Material report included Delivery according to § 21 StVZO (single acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm
Shop by Car, Audi, Polo, A1 / S1, KW Gepfeffert Coilover SuspensionAudi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover£1,790.00 – £2,290.00 inc VATFits the following models:
- Aud S1 8X 2014>
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,790.00 – £2,290.00 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,959.99 inc VATH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>
RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model please check RSS-13-471-5/1SC For any queries please contact [email protected]£1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.£1,959.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mmThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
Transporter T5 / 6 / 6.1 356mm Rear Disc Upgrade
Shop by Product Type, Shop by Car, Transporter, Brake KitsRear 356mm x 22mm Big Brake Disc kit Kit Includes New OE Redrilled 356mm Discs New Carriers and adapters New hardware Discs spacer All parts are supplied in raw OE finishes, an example of a completed installed kit is shown with the yellow powder coat finish. We also have Front Transporter brake kit options 365mm with Porsche 6 pot Cayenne caliper, or 400mm SQ7 kit with 6 pot akebono caliper.£550.00 inc VAT£550.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm With Camber adjustable top mounts ( Front Strut Clamp + Twist Beam Rear ) Lowering : 80-140mm (Copy)
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hub diameter and twist beam rear suspension only. Lowering is 80-140mm with front adjustable camber top mounts. H&R Deep are monotube dampers with superior comfort while still be lower than " normal " versions. This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors. Supplied suspension may differ from image shown.£2,339.00 inc VAT£2,339.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm ( Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hum diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.£1,695.00 inc VAT£1,695.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Moderate Low Version 40-75mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,335.00 – £2,120.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-75mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,335.00 – £2,120.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Low Version 60-120mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,685.00 – £2,590.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
Gepfeffert V1 with adjustable camber dome bearings
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with full payloads and maximum axle loads, the dampers always operate with a sporty characteristic curve. KW Variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,685.00 – £2,590.00 inc VAT -
Gepfeffert KW Coilover VW Mk4 Audi A38L TT8N Beetle Bora Seat Leon 1M – 2WD
Audi, A3 / S3 / RS3, KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,695.00 – £2,020.00 inc VATGepfeffert KW Coilover suspension 2WD (low version)
Fits the following models:
- VW Golf IV / Beetle / Bora
- Audi TT 8N / A3 8L
- Seat Leon 1M
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information: V2
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - komplette Dokumentation für einfache Anwendung £1,695.00 – £2,020.00 inc VAT -
MB Design – KV4 Wheels Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, TransporterMB Design - KV4 Wheels available fitment : 8.5" x 18" ( Load Rated : 1008 KG per wheel ) 8.5 x 19" ( Load Rated 850 KG Per Wheel ) 9" x 20" ( Load Rated : 965 KG per wheel ) Offset : ( custom offset and finish available by enquiry ) PCD : 5 x 120 Direct to Bore 65.1 fitment. Concave design. Big brake friendly. Priced per wheel. High Quality German Made. ( On Back order : Made to Order approx 6 weeks enquire via [email protected] )£395.00 – £545.00 inc VAT£395.00 – £545.00 inc VAT -
SRS-Tec Rear spoiler H-Style, VW Golf II Mk2
Shop by Product Type, Shop by Car, Volkswagen, Golf Mk1 / Mk2 / Mk3, SRS-TecHersteller SRS-Tec Article Rear spoiler H-Style Area of use Vehicle manufacturer: VW Model: Golf II Mk2 Typ: 19E Model year: 08/1983 – 12/1992 Submodel: all (besides convertible) Disclaimer This is not an original Volkswagen AG product. Details Notice Suitable without modifications for the VW Golf Mk2 tailgate. Expert’s report German TÜV report (in preperation) Material Made in Germany – GRP composite Assembly Screw and glue to the tailgate. This product is delivered unpainted.£260.00 inc VAT£260.00 inc VAT -
Sale
Wheel hub conversion kit, front + rear, Audi 80 to 5×112, front = 75mm, rear = 75mm, with wheel bearing, front, rear
Shop by Product Type, Special Parts, HubsWheel hub conversion kit, front + rear, Audi 80 to 5x112, front = 75mm, rear = 75mm, with wheel bearing, front, rear Wheel hub conversion kit from Special Parts to a bolt circle of 5x112 for the front and rear axle of Audi 80. Special Parts wheel hubs were produced to fit precisely and can be installed with the original wheel bolts. They are also completely galvanized and therefore very durable. Special Parts wheel hubs can be installed plug & play - without adapters etc. The perfect solution for driving rims with a bolt circle of 5x112. The use of these wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Outer diameter [mm]:75mm Required quantity:1 Installation side:Front axle, rear axle multi-part:multi-part Unit of measure:Sentence Fits the following vehciles : AUDI 80 B3 notchback (893, 894, 8A2) 1.4 65 hp 1400cc 06/1986 - 10/1991 - 0588 380 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 75 hp 1595 cc 06/1986 - 10/1991 - 0588 382 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 70 hp 1595 cc 06/1986 - 10/1991 - 0588 415 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 102 hp 1595 cc 06/1986 - 10/1991 - AUDI 80 B3 notchback (893, 894, 8A2) 1.6D 54 hp 1588 cc 06/1986 - 10/1991 - 0588 379 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.6 TD 80 hp 1588 cc 06/1986 - 10/1991 - 0588 384 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 75 hp 1781 cc 06/1986 - 10/1991 - 0588 381 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 113 hp 1847 cc 06/1986 - 10/1991 - 0588 388 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E 112 hp 1781 cc 06/1986 - 10/1991 - 0588 387 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 E quattro 112 hp 1781 cc 06/1986 - 10/1991 - 0588 404 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 quattro 113 hp 1847 cc 06/1986 - 10/1991 - 0588 405 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 88 hp 1781 cc 06/1986 - 10/1991 - 0588 385 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 p 90 hp 1781 cc 06/1986 - 10/1991 - 0588 511 0588 386 Chassis number (VIN) from: 89J373599 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 88 hp 1781 cc 06/1986 - 10/1991 - 0588 402 Chassis number (VIN) from: 89-J-351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.8 S quattro 90 hp 1781 cc 06/1986 - 10/1991 - 0588 403 Chassis number (VIN) from: 89J351001 Year of manufacture from: 05.88 AUDI 80 B3 notchback (893, 894, 8A2) 1.9 D 68 hp 1896 cc 06/1986 - 10/1991 - 0588 471 AUDI 80 B3 notchback (893, 894, 8A2) 2.0112 hp1984 cc 06/1986 - 10/1991 -0588 488 0588 407 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 113 hp 1984 cc 06/1986 - 10/1991 - 0588 426 AUDI 80 B3 notchback (893, 894, 8A2) 2.0E 16V 137 hp 1984 cc 06/1986 - 10/1991 - 0588 492 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E 16V quattro 137 hp 1984 cc 06/1986 - 10/1991 - 0588 498 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 E quattro 113 hp 1984 cc 06/1986 - 10/1991 - 0588 424 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 112 hp 1984 cc 06/1986 - 10/1991 - 0588 495 AUDI 80 B3 notchback (893, 894, 8A2) 2.0 quattro 115 hp 1984 cc 06/1986 - 10/1991 - 0588 502 AUDI 80 B3 notchback (893, 894, 8A2) 2.3 quattro 133 hp 2309 cc 06/1986 - 10/1991 - AUDI 80 B4 Avant (8C5) 1.6 E 101 hp 1595 cc 09/1991 - 01/1996 - 0588 580 AUDI 80 B4 Avant (8C5) 1.9 TD 75 hp 1896 cc 09/1991 - 01/1996 - AUDI 80 B4 Avant (8C5) 1.9 TDI 90 hp 1896 cc 09/1991 - 01/1996 - 0588 543 AUDI 80 B4 Avant (8C5) 2.0 90 hp 1984 cc 09/1991 - 01/1996 - 0588 544 AUDI 80 B4 Avant (8C5) 2.0 E 115 hp 1984 cc 09/1991 - 01/1996 - 0588 545 AUDI 80 B4 Avant (8C5) 2.0E 16V 140 hp 1984 cc 09/1991 - 01/1996 - 0588 572 AUDI 80 B4 Avant (8C5) 2.3 E 133 hp 2309 cc 09/1991 - 01/1996 - 0588 546 AUDI 80 B4 Avant (8C5) 2.3 E quattro 133 hp 2309 cc 09/1991 - 01/1996 -0588 547 Rim size [inch]: 15 inches AUDI 80 B4 notchback (8C2) 1.6 71 hp 1595 cc 09/1991 - 07/1995 - 0588 542 AUDI 80 B4 notchback (8C2) 1.6 E 101 hp 1595 cc 09/1991 - 07/1995 - 0588 579 AUDI 80 B4 notchback (8C2) 1.9 TD 75 hp 1896 cc 09/1991 - 07/1995 - 0588 534 AUDI 80 B4 notchback (8C2) 1.9 TDI 90 hp 1896 cc 09/1991 - 07/1995 - 0588 535 AUDI 80 B4 notchback (8C2) 2.0 90 hp 1984 cc 09/1991 - 07/1995 - 0588 519 AUDI 80 B4 notchback (8C2) 2.0 E 115 hp 1984 cc 09/1991 - 07/1995 - 0588 536 AUDI 80 B4 notchback (8C2) 2.0E 16V 140 hp 1984 cc 09/1991 - 07/1995 - 0588 560 AUDI 80 B4 notchback (8C2) 2.0 E 16V quattro 140 hp 1984 cc 09/1991 - 07/1995 - 0588 561 AUDI 80 B4 notchback (8C2) 2.0 E quattro 115 hp 1984 cc 09/1991 - 07/1995 - 0588 537 AUDI 80 B4 notchback (8C2) 2.3 E 133 hp 2309 cc 09/1991 - 07/1995 - 0588 538 AUDI 80 B4 notchback (8C2) 2.3 E quattro 133 hp 2309 cc 09/1991 - 07/1995 - 0588 539 AUDI 80 B4 notchback (8C2) 2.6 quattro 150 hp 2598 cc 09/1991 - 07/1995 - 0588 563 AUDI 80 B4 notchback (8C2) 2.8 quattro 174 hp 2771 cc 09/1991 - 07/1995 - 0588 521£350.00 inc VAT£350.00 inc VAT -
Brake caliper conversion kit, VA ( Front ), VW Golf 2, Corrado, G60 brake, incl. brake caliper holder + brake pads
Shop by Product Type, Special Parts, Brake KitsBrake caliper conversion kit, VA, VW Golf, Corrado, G60 brake, incl. brake caliper holder + brake pads The perfect repair solution for converting the front axle of the VW Golf, Corrado G60. Individual parts also available. The scope of delivery includes 2 brake calipers and brake caliper holders including mounting accessories as well as the matching brake pads (4 pieces). Supplementary article/additional information:with Holder Supplementary article/Supplementary information 2:with brake pads Required quantity:1 Brake caliper version:Fist saddle Braking system:Lucas / TRW Diameter [mm]:54mm Installation side:Front axle Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence£120.00 – £556.00 inc VAT£120.00 – £556.00 inc VAT -
Sale
2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right
Shop by Product Type, Special Parts, Brake Kits2x brake caliper, stainless steel, for VW Golf 7 GTI Performance, 340 mm, calipers + holder, left right In our range: Due to high demand from our customers, Special Parts now also offers this complete brake caliper set for VW Golf 7 GTI Performance, 340 mm, calipers + holder, rear axle left right in our range. Scope of delivery: 2x brake caliper 2x brake caliper holder Required quantity:1 Caliper color:red Braking system:TRW Installation side: Front axle left, front axle right Piston diameter [mm]:60mm Material:Gray cast iron multi-part:multi-part Unit of measure:Sentence£200.00 inc VAT£200.00 inc VAT -
Brake caliper holder set, VA ( Front ), Golf 1, Plug & Play G60
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake KitsBrake caliper holder set, VA, Golf 1, Plug & Play G60 Special Parts offers a complete set of brake caliper holders as plug & play for G60 brakes, front axle, suitable for VW Golf 1 models, for installing a 280 mm brake disc. The scope of delivery includes 2 pieces of brake caliper holder including mounting material. for brake disc diameter [mm]:280mm Required quantity:1 Brake type:Disc brake Installation side:Front axle Manufacturer approval:Special parts multi-part:two parts Unit of measure:Sentence£160.00 inc VAT£160.00 inc VAT -
Rear Set Brake Disc + Pads + Rear wheel bearing 5 x 100 VW Golf II/III Corrado Passat Vento
Shop by Product Type, Special Parts, Brake KitsBrake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]:226mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Brake disc type:Full Brake disc thickness [mm]:10.0mm Braking system:LUCAS Installation side:rear axle Manufacturer approval:Frenix Number of holes:5 Hole circle Ø [mm]:100mm multi-part:multi-part Unit of measure:Sentence VW CORRADO (53I) 2.9 VR6 190 hp 2861 cc 08/1987 - 12/1995 - 0600 905 VW GOLF III (1H1) 1.9 TDI 110 hp 1896 cc 10/1989 - 07/1998 - 0603 387 0600 279 VW GOLF III (1H1) 2.0 115 hp 1984 cc 10/1989 - 07/1998 - 0603 388 0600 893 VWGOLF III (1H1)2.0 GTI 16V 150 hp1984 cc10/1989 - 07/1998 -0603 3900600 908 VWGOLF III (1H1)2.8 VR6 174 hp 2792 cc 10/1989 - 07/1998 -0600 8940603 391 VWGOLF III Variant (1H5) 1.9 TDI 110 hp 1896 cc 07/1993 - 04/1999 -0603 4020600 281 VWGOLF III Variant (1H5) 2.0 115 hp1984 cc07/1993 - 04/1999 -0600 9400603 403 VWPASSAT B3/B4 (3A2, 35I) 1.9 TDI 110 hp 1896 cc 02/1988 - 12/1997 -0600 297 Brake type: drum brake VWPASSAT B3/B4 (3A2, 35I) 2.0 16V 150 hp 1984 cc 02/1988 - 12/1997 -0600 949 VWPASSAT B3/B4 (3A2, 35I) 2.8 VR6 174 hp 2792 cc 02/1988 - 12/1997 -0600 835 VWPASSAT B3/B4 Variant (3A5, 35I) 1.9 TDI 110 hp1896 cc02/1988 - 06/1997 -0600 298Year ofmanufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.0 16V 150 hp1984 cc02/1988 - 06/1997 -0600 950Year of manufacture until: 12.96 VWPASSAT B3/B4 Variant (3A5, 35I)2.8 VR6 174 hp2792 cc02/1988 - 06/1997 -0600 836 SEATTOLEDO I (1L2)2.0 i 16V 150 hp1984 cc 01/1991 - 10/1999 -7593 374 Year of manufacture until: 09.98 for combined PR number: 1KD+1KKYear of manufacture from: 09.96 VWVENTO (1H2) 2.0 115 hp 1984 cc11/1991 - 09/1998 - 0600 9000603 414 VWVENTO (1H2) 2.8 VR6 174 hp2792 cc11/1991 - 09/1998 - 0603 4150600 901£120.00 inc VAT£120.00 inc VAT -
Sale
Brake disc conversion kit, VA ( Front ), VW Passat 35i without plus axle 280mm G60 conversion bolt circle 5×100
Shop by Product Type, Special Parts, Brake KitsBrake set brake discs + brake pads + rear wheel bearing 5 holes Complete Frenix brake set for the rear axle. Consisting of: 2x brake discs 4x brake pads 2x wheel bearing sets 2x ABS sensor rings Frenix is a brake brand that offers the best quality at fair prices. Supplementary article/Supplementary information 2: with wheel bearing set, with ABS sensor ring Outer diameter [mm]: 226mm Required quantity: 1 Braking/driving dynamics: for vehicles with ABS Brake disc type: Full Brake disc thickness [mm]: 10.0mm Braking system: LUCAS Installation side: rear axle Manufacturer approval: Frenix Number of holes: 5 Hole circle Ø [mm]: 100mm multi-part: multi-part Unit of measure: Sentence£95.00 inc VAT£95.00 inc VAT -
Pre-assembled steering knuckle, VA Front left + Right, VW GOLF II / III with ABS 4x 100
Shop by Product Type, Special Parts, HubsPre-assembled steering knuckle, VA left + Right, VW GOLF II / III with ABS 4x 100 Pre-assembled steering knuckle for standard bolt circle of 4x100 for Seat Ibiza II, VW Caddy II, VW Golf II, with ABS, front axle left, consisting of 1x steering knuckle 1x wheel bearing set 1x wheel hub mounting accessories suitable pre-assembled steering knuckle right: 107764/5 Supplementary article/Supplementary information 2: with wheel bearing, with wheel hub, with sensor, wheel speed Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle left Manufacturer approval:assembled/assembled, special parts multi-part:multi-part Unit of measure:Sentence paired article number: 107764/5£295.00 inc VAT£295.00 inc VAT -
Pre-assembled steering knuckle, VA Front left + VW Right, VW GOLF II / III with ABS 5×100
Shop by Product Type, Special Parts, HubsPre-assembled steering knuckle, VA right + Left , VW GOLF II / III with ABS 5x100 This pre-assembled steering knuckle is supplied with a 5x100 bolt circle for the narrow axle of the VW Golf 2 and 3 for the left and right front axle and creates completely new possibilities for you than just driving the standard rim. Pre-assembled steering knuckle consisting of: 2x steering knuckle 2x wheel bearing set 2x wheel hub 2x ABS sensor mounting accessories suitable pre-assembled steering knuckle left: 107763/100 The use of these pre-assembled wheel hubs on public roads usually requires individual acceptance in accordance with Section 21 StVZO by an officially recognized expert. We therefore provide the required material certificate in the scope of delivery for individual acceptance. Supplementary article/Supplementary information 2: with wheel hub, with wheel bearing for hole circle diameter of [mm]:100mm Required quantity:1 Braking/driving dynamics:for vehicles with ABS Installation side:Front axle right Manufacturer approval:Special parts multi-part:multi-part Unit of measure:Sentence paired article number:107763/100 Admission type:Requires registration, not permitted in the area of the StVZO£295.00 inc VAT£295.00 inc VAT
