Gepfeffert VW ID.Buzz Cargo KW V3 Coilover 45-100mm
£3,089.00 inc VAT
New developed KW V3 Gepfeffert coilover for the ID.Buzz giving additional lowering range 45-100mm.
Special order item terms and conditions apply.
*On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .
Gepfeffert KW Coilover suspension for VW ID.Buzz, for use with original top mounts.
This version offers more lowering range than the normal KW version.
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Made to Order (contact us for lead time)
Gepfeffert V1 KW Coilover VW Mk7 / 7.5 Golf with camber adjustable top mounts 2WD
Shop by Product Type, Suspension, KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert CoiloverFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
| - Optimally adjusted in advance |
| - sporty and harmonious damping technology |
| - Stainless steel technology "inox-line" |
| - individually height adjustable |
| - tested adjustment range |
| - ready-to-install complete solution |
| - High quality components for long service life |
| - complete documentation for easy handling |
Still Static Camber Castor Top Mounts Mk1-Mk3 Golf
Shop by Product Type, Suspension, Scirocco / Corrado / Eos, Golf Mk1 / Mk2 / Mk3, Coilover Suspension Accessories, Air Suspension Accessories, Coilover Suspension Parts, Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover SuspensionWhat Do I Get?
All Still Static top mounts are constructed from high-grade 7075 aluminium. Anodised black finishes are the most popular option although a huge selection of colours are available to order, making for great personalisation. A key feature of the Still Static top mounts is the spherical, high-impact, PTFE-lined bearing that’s present on each mount. Not only is this exceptionally hard wearing, but it’s also replaceable. So, if on the extremely rare occasion the bearing is damaged from a heavy impact, you don’t need to replace the entire top mount.Are They Available for My Car?
At present, Still Static Top Mounts are available for the Mk1, Mk2 and Mk3 VW platforms: Mk1 Top Mounts – Both camber (up to 2.5° negative) and caster (1.5° positive to 1.5° negative) are individually adjustable Mk2 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly Mk3 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly