Deep Coilover Kit

Filters

Showing 13–24 of 106 results

Departments

Price Filter

13-24 of 106 products

  • £1,695.00 inc VAT

    H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm ( Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm

    , ,
    H&R Deep Coilover to fit Beetle Type 16 with 55mm front hum diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.
    £1,695.00 inc VAT
    £1,695.00 inc VAT
  • £1,660.00£1,930.00 inc VAT

    H&R Deep Coilover Kit for VW Golf MK8 R and 4Motion

    ,

    H&R Deep Coilover Kit for VW Golf MK8 R + 4 Motion  inc Adjustable Camber Top Mounts 

    The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R's own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
    £1,660.00£1,930.00 inc VAT
    £1,660.00£1,930.00 inc VAT
  • £1,660.00£1,930.00 inc VAT

    H&R Deep Coilover Kit for VW Golf MK8 GTD, GTI, GTI Clubsport inc Adjustable Camber Top Mounts

    H&R Deep Coilover Kit for VW Golf MK8 2WD GTD GTi Clubsport inc Adjustable Camber Top Mounts 

    The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R’s own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
    £1,660.00£1,930.00 inc VAT
    £1,660.00£1,930.00 inc VAT
  • £1,449.99£2,939.99 inc VAT

    H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8S

    ,
    H&R Deep Coilover Kit for : Audi TT 8S 2Wd 08/12> Audi TTS TTRS 8S 4wd 2013> For electronic damping models use delete kit p/n 93005-1 for years upto 2014 and 93008-1 after 2014. H&R Deep Coilovers are made by H&R Special Suspension for StillStatic un the UK. These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.
    If you are unsure which coilover best suits your needs please contact us [email protected]
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,449.99£2,939.99 inc VAT
    £1,449.99£2,939.99 inc VAT
  • £2,080.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub Lowering F:100mm R:130mm

    Transporter Deep Coilover made by H&R for StillStatic The kit is fixed damping. Comes with 2 years warranty. To fit Clamp type hub. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm Rear : 130mm ( bump stop modification required ) Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm Rear : 130mm ( Bump stop modification required ) Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm Rear :130mm ( Bump stop modification required ) *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. ( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load ) Example coilover image shown, delivered product may vary. Coilover image may vary from actual product.
    £2,080.00 inc VAT
    £2,080.00 inc VAT
  • £2,030.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp hub F:100mm R:90mm

    Transporter Deep Coilover made by H&R for StillStatic This suspension is fixed damping. Comes with 2 years warranty. To fit Clamp Hub type. Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm Rear : 90mm Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm Rear : 90mm Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm Rear :90mm *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. ( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load using 130mm rear version ) Example coilover image shown, delivered product may vary.
    £2,030.00 inc VAT
    £2,030.00 inc VAT
  • £2,030.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 / 28 / 30 Cylindrical Clamp F: 100mm R: 90mm

    Transporter Deep Coilover made by H&R for StillStatic, 100mm Lowering in the front , 90mm lowering in the rear. The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty. To fit Cylinder Hub type. Example pictures shows our T32 with approx 10mm threads remaining in the front and 20mm threads remaining in the rear without load. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 90mm Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm ( or 130mm with hub modding )  Rear : 90mm Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :90mm *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. Example coilover image shown, delivered product may vary.
    £2,030.00 inc VAT
    £2,030.00 inc VAT
  • £1,260.00£1,860.00 inc VAT
    £1,260.00£1,860.00 inc VAT
  • £1,402.49 inc VAT
    £1,402.49 inc VAT
  • £1,449.99£1,649.99 inc VAT

    H&R Deep Coilover Kit for VW MK7/7.5 Golf Gtd Gti ClubSport GTE TCR Golf R ( With or Without camber adjustment )

    , ,
    H&R Deep Coilover Kit for : Golf Mk7 + 7.5 facelift models ,  Chassis Type AU MQB 11/12> inc. GTD,  Gti,  Clubsport,  TCR,  R For electronic damping models use delete kit p/n 93068-1 These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.
    If you are unsure which coilover best suits your needs please contact us [email protected]
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,449.99£1,649.99 inc VAT
    £1,449.99£1,649.99 inc VAT
  • £1,689.00 inc VAT
    £1,689.00 inc VAT
  • £1,689.00 inc VAT
    £1,689.00 inc VAT