MTS Technik Street Gold Mk2 Golf Coilover kit
MTS Technik Street Gold Mk2 Golf Coilover kit
£569.00 – £799.00 inc VAT
Coilover Kit Volkswagen Golf II
Coilover Kit MTS Technik for Volkswagen Golf II, lowering the front axle between 30 – 80 mm, and rear between 25 – 80 mm. Dedicated for the years of: 08/83 – 12/92, for the engine version: 1.0 / 1.3 / 1.6 / 1.8 / 1.8 GTI / 1.8 16V GTI / 1.8 GTI G60 / 1.6D / 1.6TD.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Sale
MTS Technik Street Coilover Kit Volkswagen Golf 5 / 6 Jetta 5
MTS Suspension, Golf Mk5 Mk6 MTS Technik CoiloversCoilover Kit Volkswagen Golf V Hatchback
Coilover Kit MTS Technik for Volkswagen Golf V Hatchback, lowering the front axle between 35 - 70 mm, and rear between 35 - 60 mm. Dedicated for the years of: 10/03 - 07/10, for the engine version: 1.4 / 1.4FSI / 1.4TSI / 1.6 / 1.6FSI / 2.0FSI / 2.0GTI / 1.9TDI / 2.0SDI / 2.0TDI.| Series: | street |
| Housing: |
gold |
 Max. Axle Load FA: |
1036 - 1170 kg |
| Max. Axle Load RA: |
-1150 kg |
| Lowering FA: |
35 - 70 mm |
| Lowering RA: |
35 - 60 mm |
| Camber / top mount FA: |
optional |
| Camber / top mount RA: |
no |
| Coilover Main Spring (Front): Comfort |
Spring rate (34 - 40 - 70 N/mm) |
| Coilover Main Spring (Rear): Comfort |
Spring rate (43,6 N/mm) |
| TUV Certificate: |
yes |
| Download information brochure: | Download information brochure |
| Download installation manual: | Download installation manual |
| Download TUV Certificate: | Download TUV Certificate |
| Series: | sport |
| Housing: |
gold |
| Max. Axle Load FA: |
1036 - 1170 kg |
| Max. Axle Load RA: |
-1150 kg |
| Lowering FA: |
35 - 70 mm |
| Lowering RA: |
35 - 60 mm |
| Camber / top mount FA: |
yes |
| Camber / top mount RA: |
no |
| Coilover Main Spring (Front): |
Spring rate (42,5 - 75 N/mm) |
| Coilover Main Spring (Rear): |
Spring rate (80 N/mm) |
| Coilover Helper Spring (Rear): |
Spring rate (20 N/mm) |
| TUV Certificate: |
no |
| Download information brochure: | Download information brochure |
| Download installation manual: | Download installation manual |
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
5 - Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
6 - If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
8 - Not for 4x4.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Fits the following models :
£539.00 – £869.00 inc VAT
MTS Technik Coilover Kit BMW 5 Series / E39 Saloon
MTS Suspension, 5 Series MTS Technik CoiloversCoilover Kit BMW 5 Series / E39 Sedan
Coilover Kit MTS Technik for BMW 5 Series / E39 Sedan, lowering only the front axle between 40-90 mm. Dedicated for the years of: 11/95 - 06/03, for the engine version: 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d.BMW 5 Series / E39 Sedan 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d
11/95 - 06/03
BMW 5 Series / E39 Kombi 520i / 523i / 525i / 528i / 530i / 540i / 520d /525d / 525tds / 530d
09/96 - 06/04
| Series: | street |
| Housing: |
gold |
 Max. Axle Load FA: |
-1105 kg |
| Max. Axle Load RA: |
-1225 kg |
| Lowering FA: |
40 - 90 mm |
| Lowering RA: |
30 - 120 mm |
| Camber / top mount FA: |
yes |
| Camber / top mount RA: |
no |
| Coilover Main Spring (Front): |
Spring rate (70 N/mm) |
| Coilover Helper Spring (Front): |
Spring rate (20 N/mm) |
| Coilover Main Spring (Rear): |
Spring rate (25 - 33,5 - 43 N/mm) |
| TUV Certificate: |
no |
| Download information brochure: | Download information brochure |
| Download installation manual: | Download installation manual |
2 - Front and rear axle height adjustable (threaded shock absorber housing).
8 - Not for 4x4.
12 - Only for vehicles without EDC.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
34 -Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).
73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
£339.00 – £819.00 inc VAT