-
Muecke Audi A3 8P > 2009 clean ( no indicator ) widened wings 4cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- Audi A3 8P wing GFK 4 cm wider per side
- clean, without blinkers
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (Einzelabhnahme)
- (shown in picture carbon wing 1100, - Euro)
- Free shipping!
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke Audi TT 8J widened wings 3cm
TT / TTS/ TTRS, Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set of fiberglass Audi TT 8 J wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£449.00 inc VAT -
Muecke Audi TT 8S widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set left & right widened wings 3cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Muecke Audi RS3 8P widened wings 3cm
Muecke-Carbon & Bodywork Parts ( Wider Wings )- 1 set left & right widened wings made of GRP 3cm per side
- unpainted, surface gelcoat gray
- only fitting Audi RS3 8P
- Material report included Delivery according to § 21 StVZO (single acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm
Shop by Car, Audi, Polo, A1 / S1, KW Gepfeffert Coilover SuspensionAudi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover£1,790.00 – £2,290.00 inc VATFits the following models:
- Aud S1 8X 2014>
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,790.00 – £2,290.00 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R CoiloversH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>
RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model please check RSS-13-471-5/1SC For any queries please contact [email protected]£1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.£1,959.99 inc VATThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
Transporter T5 / 6 / 6.1 356mm Rear Disc Upgrade
Shop by Product Type, Shop by Car, Transporter, Brake KitsRear 356mm x 22mm Big Brake Disc kit Kit Includes New OE Redrilled 356mm Discs New Carriers and adapters New hardware Discs spacer All parts are supplied in raw OE finishes, an example of a completed installed kit is shown with the yellow powder coat finish. We also have Front Transporter brake kit options 365mm with Porsche 6 pot Cayenne caliper, or 400mm SQ7 kit with 6 pot akebono caliper.£550.00 inc VAT£550.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm With Camber adjustable top mounts ( Front Strut Clamp + Twist Beam Rear ) Lowering : 80-140mm (Copy)
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hub diameter and twist beam rear suspension only. Lowering is 80-140mm with front adjustable camber top mounts. H&R Deep are monotube dampers with superior comfort while still be lower than " normal " versions. This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors. Supplied suspension may differ from image shown.£2,339.00 inc VAT£2,339.00 inc VAT -
H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm ( Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm
H&R Coilover Suspension, Beetle, H&R CoiloversH&R Deep Coilover to fit Beetle Type 16 with 55mm front hum diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.£1,695.00 inc VAT£1,695.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Moderate Low Version 40-75mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert CoiloversFits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-75mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,335.00 – £2,120.00 inc VAT -
Gepfeffert KW Coilover VW Golf 5 / 6 2wd + 4wd ( Low Version 60-120mm )
KW Gepfeffert Coilover Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert CoiloversFits the following models:
- VW Golf V, VI / Passat 3C, CC / EOS / Beetle / Touran / Scirocco
- Audi TT 8J / A3 8P
- Skoda Octavia 1Z
- incl. 4motion / quattro
Gepfeffert V1 with adjustable camber dome bearings
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with full payloads and maximum axle loads, the dampers always operate with a sporty characteristic curve. KW Variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information: V1
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling Technical information: V2
- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,685.00 – £2,590.00 inc VAT