-
ID.Buzz Cargo H&R Deep Coilover
ID. BuzzNew developed H&R deep coilover for the ID.Buzz giving additional lowering range 40-80mm. Important to note is this is a special low version made for us by H&R Special Suspension Germany. Modifications and clearances maybe needed depending on the wheel and tyre combination used. Its possible to mount upto 22" wheels on this platform. Please contact us if you would like to know more on mounting this suspension kit , the first UK Buzz has now been dropped on this kit as shown in the gallery images. More products such as H&R Lowering springs, Adjustable Spring kits and Normal Version Coilovers are available [email protected] Suspension is made to order and delivered in approx 2 weeks.£1,630.00 – £2,020.00 inc VATNote: The picture may differ from the delivered productThe Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by H&R GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). Neither H&R GmbH or StillStatic Limited accepts liability for any damage that may occur as a result of non-compliance with the above points.£1,630.00 – £2,020.00 inc VAT -
MB Design – Forged SF1 Wheels 9J x 20″ 5 x 120 Transporter T5 T6 T6.1 LOAD RATED
mbDESIGN Wheels, TransporterMB Design - Forged SF1 Wheels 9J x 20" 5 x 120 Concave design. Big brake friendly. Priced per wheel. Offset : Et 30 / 35 / 42 ( recommended fitments static or air front and rear et42 / front et 42 rear et30/35 ) PCD : 5 x 120 Load Rated 950 KG per wheel High Quality German Made.£725.00 – £875.00 inc VAT£725.00 – £875.00 inc VAT -
Caddy 2K / 2KN H&R Deep shorter harder rear damper ( only for cars without headlight leveling )
Volkswagen, Caddy Dampers, Caddy H&R Deep Coilover KitsH&R Special Suspension Shortened Bilstein damper made for StillStatic , for use with deep suspension , or air suspension. The damper is fixed rate but harder than stock dampers helping to overcome wheel wobble common with leaf spring and beam set ups on caddys. Suitable for carrying weight. Priced per damper.£250.00 inc VAT£250.00 inc VAT -
VW Caddy Mk5 Van + Mpv Lowering 2020> Caddy Commerce pro, Cargo, Maxi
Shop by Car, Volkswagen, Caddy£290.00 – £2,250.00 inc VAT -
H&R Deep Coilover Kit for Mk1 Caddy
Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover Suspension, Caddy H&R Deep Coilover Kits£1,005.99 – £1,662.99 inc VAT -
H&R Deep Coilover Kit for VW Golf MK8 GTD, GTI, GTI Clubsport inc Adjustable Camber Top Mounts
Golf 7 / 7.5 / Mk8 H&R Deep Coilover SuspensionH&R Deep Coilover Kit for VW Golf MK8 2WD GTD GTi Clubsport inc Adjustable Camber Top Mounts
The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R’s own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]£1,799.99 – £2,099.99 inc VAT -
SRS-Tec Wide Front Wing GT Clean, VW Golf IV
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-TecSRS-Tec Article Wide fender set GT (left & right) Version Clean, without cut outs for the indicators Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2006 Submodell: All£449.99 inc VATDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fendersIncluded
SRS-Tec front Fender GT Clean left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£449.99 inc VAT -
VW/Audi/Seat MQB + PQ35 4 + 6 pot Front Brake Kits
Shop by Product Type, Suspension, Shop by Car, Audi, Seat, Skoda, Volkswagen, A3 / S3 / RS3, TT / TTS/ TTRS, Golf, Caddy, Scirocco / Corrado / Eos, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Brake Adaption, T Roc, Tiguan, Touran, Passat CC, Octavia, Superb, LeonWe offer a number of brake kits for the the following platforms. Golf 5 R32 , Golf 5 Gti ( fitted with R32 rear calliper ) , Golf 6 R , Golf 7 GTI , Golf 7 R , Audi S3 8V , Audi S3 8V , Audi RS3 8P , Audi RS3 8V, Audi TTS 8J , Audi TTRS 8J, Audi TTS 8S, Caddy 2K 2KN Example : Macan 345mm / Porsche 18Z 350mm / Akebono 380mm ,390mm, 400mm. The kit inlcudes reconditioned calipers finsished in the colour of your choice, decals, brake lines, feroddo pads or ebc pads, fitting hardware and brackets where required, disc centre rings where required. -
H&R Deep Coilover Kit for Seat Leon 5F: Fixed Beam ( 50mm strut clamp ) 50-110mm Uses OE Top Mount
Golf Mk7 / Mk7.5 / Mk8, Leon£1,460.00 inc VAT -
HP Drivetech Air Suspension Kit for Volkswagen Vento Jetta – 1H (1992-1998)
Shop by Car, Volkswagen, Jetta / Vento / Bora, Drivetech - Air Suspension, Golf Mk1 / Mk2 / Mk3 HP Drivetech Air Suspension£2,799.00 inc VAT -
HP Drivetech Air Suspension Kit for Volkswagen T-Roc – (2017- )
Drivetech - Air Suspension, T RocThe " Drivetech Suspensions Airride Kit - VW MQB " fits all VAG vehicles on the MQB platform, with 2WD & 4WD drive, a strut clamp diameter of 55mm on the front axle and multi-link rear axle: Audi A3 8V, Audi TT FV, VW Golf VII, VW Passat B8, VW Lamando, VW Tiguan II, VW Tayron, VW Tharu, VW Touran II, VW Atlas, Seat Leon III, Seat Ateca, Škoda Superb III, Škoda Octavia III , Skoda Kodiaq Important: Measure the shock absorber in advance! The kit includes: 2x Drivetech Suspensions shock absorbers for the front axle 2x Drivetech Suspensions single-fold air bellows for the front axle 2x Drivetech Suspensions shock absorbers for the rear axle 2x Drivetech Suspensions Continental air bellows for the rear axle 2x steel braided line - fastening material for the rear air bellows - TÜV certificate£2,599.00 – £2,849.00 inc VAT£2,599.00 – £2,849.00 inc VAT