H&R

Filters

Showing 1–24 of 125 results

View 12/24/All

Departments

Price Filter

1-24 of 125 products

  • £955.00£2,290.00 inc VAT

    H&R Deep Coilover Kit for VW Caddy Mk3 / Mk4 Type 2K, 2KN inc Life + Maxi

    , , ,
    H&R Deep coilovers are made exclusively for StillStatic in the Uk and offer more lowering than normal versions. We have coilovers suited to original top mounts and kits with adjustable camber top mounts. We also have an made to order custom rear beam for those looking for the ultimate set up. All suspension kits are based on monotube bilstein technology with H&R springs resulting superb performance or comfort when low. The caddy 2K platform coilover has an improved rear damper to help overcome the leaf spring movement common on these vehicles while still being suitable for carrying load when low. We have various options so if you are unsure of what is best suited for you please feel free to call us or contact us via email [email protected]      
    £955.00£2,290.00 inc VAT
    £955.00£2,290.00 inc VAT
  • £1,360.49 inc VAT
    £1,360.49 inc VAT
  • £1,429.99£2,479.98 inc VAT
    £1,429.99£2,479.98 inc VAT
  • £1,799.99 inc VAT

    H&R Deep Coilover Kit for VW Polo 5 6R/6C1 very low 110mm

    , , , , ,
    H&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. This version is -20mm shorter than GFW50015-1 which lowers 90mm max Lowered front axle from [mm]: 80 • Lowering front axle up to [mm]: 100 Lowered rear axle from [mm]: 80 • Lowered rear axle up to [mm]: 110 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,799.99 inc VAT
    £1,799.99 inc VAT
  • £2,080.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 T28 T30 Cylindrical Clamp F: 100mm ( 130mm hub mod ) R: 130mm

    Transporter Deep Coilover made by H&R for StillStatic The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty. To fit Cylinder Hub type. Example pictures shows our T32 with approx 10mm threads remaining in the front 9 not hub modded version ) and 20mm threads remaining in the rear without load. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 130mm ( bump stop modification required ) Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm ( or 130mm with hub modding )  Rear : 130mm ( Bump stop modification required ) Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :130mm ( Bump stop modification required ) *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. Example coilover image shown, delivered product may vary.
    £2,080.00 inc VAT
    £2,080.00 inc VAT
  • £1,789.00 inc VAT
    £1,789.00 inc VAT
  • £1,249.99 inc VAT

    H&R Deep Coilover Kit for VW Polo 5 6R / 6C1 ( 90mm )

    , , , , ,
    H&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. Lowered front axle from [mm]: 60 • Lowering front axle up to [mm]: 80 Lowered rear axle from [mm]: 60 • Lowered rear axle up to [mm]: 90 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,249.99 inc VAT
    £1,249.99 inc VAT
  • £1,663.99 inc VAT
    £1,663.99 inc VAT
  • £1,513.99 inc VAT
    £1,513.99 inc VAT
  • £1,885.00 inc VAT

    H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm Fixed damping:

    , , , , ,
    H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm fixed damping Fits RS6 C6 4F C7 4G
    £1,885.00 inc VAT
    £1,885.00 inc VAT
  • £1,450.49 inc VAT
    £1,450.49 inc VAT
  • £2,029.00£2,939.99 inc VAT

    H&R Deep Coilover Kit for Audi S3 8Y / RS3 Limo 8YA

    H&R Deep Coilover Kit for : H&R Deep Coilover Kit for Audi A3 / S3 8Y / RS3 8YA Limo 2019> Lowering 40-80mm EDC cancellation kit 93068-1 These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.
    If you are unsure which coilover best suits your needs please contact us [email protected]
    Note: The picture may differ from the delivered product
    The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £2,029.00£2,939.99 inc VAT
    £2,029.00£2,939.99 inc VAT
  • £1,959.99 inc VAT

    H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm

    , , , , ,

    H&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>

    RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model  please check RSS-13-471-5/1SC For any queries please contact [email protected]
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • £1,959.99 inc VAT

    H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm

    , , , , ,
    Audi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.
    This is a custom made “Deep” version coilover kit made to order.
    It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mm
    £1,959.99 inc VAT
    £1,959.99 inc VAT
  • £2,339.00 inc VAT

    H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm With Camber adjustable top mounts ( Front Strut Clamp + Twist Beam Rear ) Lowering : 80-140mm (Copy)

    , ,
    H&R Deep Coilover to fit Beetle Type 16 with 55mm front hub diameter and twist beam rear suspension only. Lowering is 80-140mm with front adjustable camber top mounts. H&R Deep are monotube dampers with superior comfort while still be lower than " normal " versions. This level of lowering requires correct fitment wheels and potential bodywork, re-setting of headlight level sensors. Supplied suspension may differ from image shown.
    £2,339.00 inc VAT
    £2,339.00 inc VAT
  • £1,695.00 inc VAT

    H&R Deep Coilover Kit for VW Beetle Type 16 09/11> 55mm ( Front Strut Clamp + Twist Beam Rear ) Lowering : 60-90mm

    , ,
    H&R Deep Coilover to fit Beetle Type 16 with 55mm front hum diameter and twist beam rear suspension only. Lowering is 60-90mm. H&R Deep are monotube dampers with superior comfort and are supplied for use with original top mounts.
    £1,695.00 inc VAT
    £1,695.00 inc VAT
  • £1,660.00£1,930.00 inc VAT

    H&R Deep Coilover Kit for VW Golf MK8 R and 4Motion

    ,

    H&R Deep Coilover Kit for VW Golf MK8 R + 4 Motion  inc Adjustable Camber Top Mounts 

    The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R's own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
    £1,660.00£1,930.00 inc VAT
    £1,660.00£1,930.00 inc VAT
  • £1,660.00£1,930.00 inc VAT

    H&R Deep Coilover Kit for VW Golf MK8 GTD, GTI, GTI Clubsport inc Adjustable Camber Top Mounts

    H&R Deep Coilover Kit for VW Golf MK8 2WD GTD GTi Clubsport inc Adjustable Camber Top Mounts 

    The new Mk8 Golf use an evolution of the MQB platform, H&R again build a low version coilover that delivers an increase in performance and handling but also adds comfort over the original set up. The suspension is available with or without EDC delete kit. Approved lowering range 45-75mm, lowering upto 110mm possible. The suspension has camber adjustable top mounts and fixed bilstein damping with H&R’s own linear spring technology. Suspension has 2 years warranty, Unsure on the wheel fitment, or anything else? contact us [email protected]
    £1,660.00£1,930.00 inc VAT
    £1,660.00£1,930.00 inc VAT
  • £1,449.99£2,939.99 inc VAT

    H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8S

    ,
    H&R Deep Coilover Kit for : Audi TT 8S 2Wd 08/12> Audi TTS TTRS 8S 4wd 2013> For electronic damping models use delete kit p/n 93005-1 for years upto 2014 and 93008-1 after 2014. H&R Deep Coilovers are made by H&R Special Suspension for StillStatic un the UK. These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.
    If you are unsure which coilover best suits your needs please contact us [email protected]
    Note: The picture may differ from the delivered product
    This version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher.  In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
    £1,449.99£2,939.99 inc VAT
    £1,449.99£2,939.99 inc VAT
  • £2,080.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp Hub Lowering F:100mm R:130mm

    Transporter Deep Coilover made by H&R for StillStatic The kit is fixed damping. Comes with 2 years warranty. To fit Clamp type hub. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm Rear : 130mm ( bump stop modification required ) Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm Rear : 130mm ( Bump stop modification required ) Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm Rear :130mm ( Bump stop modification required ) *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. ( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load ) Example coilover image shown, delivered product may vary. Coilover image may vary from actual product.
    £2,080.00 inc VAT
    £2,080.00 inc VAT
  • £2,030.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T32 Clamp hub F:100mm R:90mm

    Transporter Deep Coilover made by H&R for StillStatic This suspension is fixed damping. Comes with 2 years warranty. To fit Clamp Hub type. Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm Rear : 90mm Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm Rear : 90mm Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm Rear :90mm *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. ( example pictures shows our T32 with approx 15mm threads remaining in the front and 20mm threads remaining in the rear without load using 130mm rear version ) Example coilover image shown, delivered product may vary.
    £2,030.00 inc VAT
    £2,030.00 inc VAT
  • £2,030.00 inc VAT

    H&R Deep Coilover Kit for VW Transporter T5 / T6 / T6.1 T25 / 28 / 30 Cylindrical Clamp F: 100mm R: 90mm

    Transporter Deep Coilover made by H&R for StillStatic, 100mm Lowering in the front , 90mm lowering in the rear. The kit is has front damping adjustment in a stainless steel strut housing and fixed rear damping rear. Comes with 2 years warranty. To fit Cylinder Hub type. Example pictures shows our T32 with approx 10mm threads remaining in the front and 20mm threads remaining in the rear without load. H&R Transporter Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD ) Lowering  T5 Models Front : 100mm ( or 130mm with Hub Modding ) Rear : 90mm Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD ) Lowering  T6 Models Front : 100mm ( or 130mm with hub modding )  Rear : 90mm Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD ) Lowering T6.1 Models Front :100mm ( or 130mm with hub modding ) Rear :90mm *Note For vehicles with Electronic dampers use delete kit 93071-1 Contact us if your require fitting. Example coilover image shown, delivered product may vary.
    £2,030.00 inc VAT
    £2,030.00 inc VAT
  • £1,260.00£1,860.00 inc VAT
    £1,260.00£1,860.00 inc VAT
  • £1,613.49 inc VAT
    £1,613.49 inc VAT