-
MTS Coilover Suspension Anti Roll Bar Link – MTSLS08 ( Price individually )
Shop by Car, BMW, 3 Series, MTS Suspension Accessories, 3 Series MTS Coilover Suspension£35.00 inc VATStabilizer Link MTS Technik - MTSLS08
You do not have to worry about the availability of single elements of your suspension. To meet the expectations of customers, in our shop you will find all spare parts for coilover suspensions. We provide a 2-year warranty without any mileage limit for all components, and we will deliver the package for you free of charge. You will pay only for your products. If you want to return, there is no hurry, you have 100 days for it. Your satisfaction is most important to us.Fits the following with MTS Coilover suspension:
BMW Z4 Roadster / E85BMW Z4 Coupe / E86BMW 3 Series / E46 CabrioletBMW 3 Series / E46 KombiBMW 3 Series / E46 CompactBMW 3 Series / E46 CoupeBMW 3 Series / E46 Sedan£35.00 inc VAT -
MTS Technik Street Gold Coilover Kit BMW 3 SERIES / E36 COMPACT / Z3 Coupe / Z3 Roadster
MTS Suspension, 3 Series MTS Coilover Suspension£569.00 – £909.00 inc VATCoilover Kit BMW 3 Series / E36 Compact
Coilover Kit MTS Technik for BMW 3 Series / E36 Compact, lowering the front axle between 20 - 90 mm on original top mounts ( additional 20mm with camber adjustable top mounts ), and rear between 10 - 40 mm. Dedicated for the years of: 01/94 - 08/00, for the engine version: 316i / 316g / 318ti / 318tds / 323tiSeries: street 
Max. Axle Load FA:-900 kgMax. Axle Load RA:-1040 kgLowering FA: 20 - 90 mmLowering RA: 10 - 40 mmCamber / top mount FA: noCamber / top mount RA: noCoilover Main Spring (Front): Spring rate (60 N/mm)Coilover Helper Spring (Front): Spring rate (20 N/mm)Coilover Main Spring (Rear): Spring rate (46 - 90,1 N/mm)TUV Certificate: yes3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.33 - Including M-Technik.58 - For models up to 11/91 and M3 - the shortened sway bar link MTSLS08 shall be purchased separately.73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Fits the following Vehicles :
BMW Z3 Coupe / E36 2.8i / 3.0i / M3.2 04/97 - 06/03BMW Z3 Roadster / E361.8i / 1.9i / 2.0i / 2.2i / 2.8i / 3.0i / M3.2 10/95 - 01/03BMW 3 Series / E36 Compact 316i / 316g / 318ti / 318tds / 323ti 01/94 - 08/00Installation manualsDownload installation manual MTSGWBM99: Download installation manual Download installation manual MTSGWBM117: Download installation manual Download installation manual MTSGWBM02: Download installation manual £569.00 – £909.00 inc VAT -
MTS Technik Street Gold Coilover Kit VW Transporter T5 T6 T6.1 Cylindrical Clamp only
MTS Suspension, Transporter MTS Coilover SuspensionCoilover Kit Volkswagen Transporter T5 / T6 / T6.1 for models with cylindrical clamp only. Dedicated for the years of: 04/03 - 08/15, for the engine version: 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion. Volkswagen Transporter T6 2.0 TSI / 2.0 TSI 4motion / 2.0TDI / 2.0TDI 4motion Year 04/15 - Volkswagen Transporter T5 2.0 / 2.0TSI / 2.0TSI 4motion / 3.2 V6 / 3.2 V6 4motion / 1.9TDI / 2.0TDI / 2.0TDI 4motion / 2.5TDI / 2.5TDI 4motion 04/03 - 08/15 Volkswagen Transporter T6.1 Series: street Max. Axle Load FA: -1710 kg Max. Axle Load RA: -1720 kg Lowering FA: 30 - 70 mm Lowering RA: 30 - 60 mm Camber / top mount FA: no Camber / top mount RA: no Coilover Main Spring (Front): Spring rate (86 - 105 N/mm) Coilover Helper Spring (Front): Spring rate (20 N/mm) Coilover Main Spring (Rear): Spring rate (220 N/mm) TUV Certificate: yes£689.00 inc VATInstallation manual: Download installation manual 2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry. £689.00 inc VAT -
SRS-Tec Rear spoiler H-Style, VW Golf II Mk2
Shop by Product Type, Shop by Car, Volkswagen, Golf Mk1 / Mk2 / Mk3, SRS-TecHersteller SRS-Tec Article Rear spoiler H-Style Area of use Vehicle manufacturer: VW Model: Golf II Mk2 Typ: 19E Model year: 08/1983 – 12/1992 Submodel: all (besides convertible) Disclaimer This is not an original Volkswagen AG product. Details Notice Suitable without modifications for the VW Golf Mk2 tailgate. Expert’s report German TÜV report (in preperation) Material Made in Germany – GRP composite Assembly Screw and glue to the tailgate. This product is delivered unpainted.£260.00 inc VAT£260.00 inc VAT -
Brake caliper holder set, VA ( Front ), Golf 1, Plug & Play G60
Golf Mk1 / Mk2 / Mk3, Special Parts, Brake KitsBrake caliper holder set, VA, Golf 1, Plug & Play G60 Special Parts offers a complete set of brake caliper holders as plug & play for G60 brakes, front axle, suitable for VW Golf 1 models, for installing a 280 mm brake disc. The scope of delivery includes 2 pieces of brake caliper holder including mounting material. for brake disc diameter [mm]:280mm Required quantity:1 Brake type:Disc brake Installation side:Front axle Manufacturer approval:Special parts multi-part:two parts Unit of measure:Sentence£215.00 – £430.00 inc VAT£215.00 – £430.00 inc VAT -
MTS Technik Lowering Spring Set / Complete Lowering Kit 2K/2KN Caddy Mk3 + Mk4
VW Caddy MTS Coilover kits, MTS SuspensionLowering Springs Volkswagen Caddy III Lowering Springs MTS Technik for Volkswagen Caddy III, lowering the front axle by 55 mm, and rear axle by 45 - 75 mm. Dedicated for the years of: 2004 - 05/20, for the engine version: 1.2TSI / 1.4 / 1.6 / 2.0 / 2.0SDI Lowering Springs MTS Technik for Volkswagen Caddy IV, lowering the front axle by 55 mm, and rear axle by 45 - 75 mm. Dedicated for the years of: 05/15 - 05/20, for the engine version: 1.0TSI / 1.2TSI / 1.4TSI / 1.6. 2 year warranty with no mileage limit to confirm high quality. High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials. Mounting on sports shock absorbers Springs with an aggressive lowering, requiring the use of sports shock absorbers with a shorter stroke. Radical lowering 93 - Not suitable for 4x4 models. M45 - We recommend to use shortend shock absorbers for this set. M145 - We recommend to shorten the rear bumpstop 30mm from the bottom for better comfort. M148 - The rear consists of an adjustable flip kit for the leaf springs, consisting of metal plates. 109 - In case of additional, non-standard equipment (e.g. tow hook, LPG installation) the actual lowering of the car might be different from declared.£99.00 – £529.00 inc VAT£99.00 – £529.00 inc VAT -
H&R Race Coilover Kit for Porsche 924 , 944, 968 20mm Clamp
Suspension, H&R Coilover Suspension, Porsche, H&R Coilovers, H&R Deep Coilovers PorscheH&R Deep coilover kit for 924/944/968 Fixed damping deep H&R coilover based on RSS race derived coilover. Fixed damping for optimum comfort. Lowering range front : 60-90 rear : 50-80 Fits 20mm front hub clamp Fits vehicles with alluminium rear axle only, for steel axle choose :RSS-37-827-2/7 Made to order 2-3 weeks. The Product is a version with extreme lowering beyond the H&R standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,500.00 inc VAT£2,500.00 inc VAT -
Gepfeffert / KW Porsche 964 C2 C4 V3 Coilovers
KW Gepfeffert Coilover Suspension, Gepfeffert KW Coilover Suspension Porsche£3,088.00 – £4,240.00 inc VAT
Fits:
Porsche 993 C2 C4 10/1993>>
Normal version Lowers car by: F 20-40mm / R 10-30mm
Gepfeffert Version : FT 40-90mm / R 40-90mm
Gepfeffert Clubsport Version : FT 40-100mm / R 40-100mm
• Independently adjustable damping technology -rebound and compression damping
• inox-line stainless steel technology at no extra charge
• Individual height adjustment
• German TUV-tested adjustment parameters
• High-quality components for long life
• Comprehensive documentation for ease of use
• Infinitely adjustable rebound damping
• 14- level adjustable compression damping
• Unique, independently functioning damping power adjustment
Variant 3 race technology for the road with adjustable compression and rebound damping. The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. £3,088.00 – £4,240.00 inc VAT -
H&R Coilover Kit for VW Transporter T5 / T6 / T6.1 T25/28/30 Cylindrical Strut Clamp
Transporter H&R Deep Coilovers£1,530.00 inc VAT
H&R Transporter
Fits T5 03/03> Multivan, Transporter, California, LKW inc Facelift ( Type 7HK, 7HKXO,7HM,7HMA,7HC,7HCA,7JO,2WD+4WD )
Lowering T5 Models Front : 80mm Rear : 70mm
Fits T6 2015> Multivan, Transporter, California, LKW inc Facelift ( Type 7HC,7HMA,7JO, 2WD+4WD )
Lowering T6 Models Front : 80mm Rear : 70mm
Fits T6.1 2019> Multivan, Transporter, California, Beach ( Type1HC,7HMA,7LO,2WD+4WD )
Lowering T6.1 Models Front :90mm Rear :80mm
*Note For vehicles with Electronic dampers use delete kit 93071-1
Only for vehicles with strut clamp bracket.
The kit is fixed damping. Comes with 2 years manufacturers warranty.
To fit Cylindrical hub only not clamp.
Contact us if your require fitting. £1,530.00 inc VAT -
VW Caddy Mk5 Cargo / Van H&R Deep Coilovers
Volkswagen, Caddy H&R Deep Coilover KitsH&R Deep coilovers made for stillstatic by H&R Special Suspension. Lowering is approx. 75-100 mm front and 70-95 mm rear Including adjustable camber top mounts + Mpv Lowering 2020> Caddy Commerce pro, Cargo, Maxi Fixed damping monotube coilovers, Bilstein inserts H&r Linear Springs for ultimate comfort and ride quality. Delivered in approx 10-14 working days after order.£2,195.00 inc VAT
£2,195.00 inc VAT -
Gepfeffert V3 KW Coilover Audi RS3 8Y 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,450.00 – £2,920.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi RS3 8Y
- DDC Delete kit maybe required
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,450.00 – £2,920.00 inc VAT -
-
VW Caddy 2K / 2KN Koni Sport Damper 80-2879SPORT
Caddy Dampers£145.00 inc VATDimensions: 65.00 x 65.00 x 450.00 mm (H x W x L)Weight: 1.90 kgVehicle Fitment: rearConstruction: Twin Tube HydraulicFittings:Open / Closed Length: TBARebound / Compression Damping: TBACountry of Origin: NetherlandsHS Code: 87088035£145.00 inc VAT
