-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Still Static Camber Castor Top Mounts Mk1-Mk3 Golf
Shop by Product Type, Suspension, Scirocco / Corrado / Eos, Golf Mk1 / Mk2 / Mk3, Coilover Suspension Accessories, Air Suspension Accessories, Coilover Suspension Parts, Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover Suspension£265.00 – £310.00 inc VATWhat Do I Get?
All Still Static top mounts are constructed from high-grade 7075 aluminium. Anodised black finishes are the most popular option although a huge selection of colours are available to order, making for great personalisation. A key feature of the Still Static top mounts is the spherical, high-impact, PTFE-lined bearing that’s present on each mount. Not only is this exceptionally hard wearing, but it’s also replaceable. So, if on the extremely rare occasion the bearing is damaged from a heavy impact, you don’t need to replace the entire top mount.Are They Available for My Car?
At present, Still Static Top Mounts are available for the Mk1, Mk2 and Mk3 VW platforms: Mk1 Top Mounts – Both camber (up to 2.5° negative) and caster (1.5° positive to 1.5° negative) are individually adjustable Mk2 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly Mk3 Top Mounts – Camber adjustable (up to 2.5° negative) with caster automatically adjusting accordingly£265.00 – £310.00 inc VAT -
SRS-Tec Wide Wings GT, VW Golf V 2.5cm Wider
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-Tec£489.99 inc VATDescription
Manufacturer SRS-Tec Article Wide front fenders GT (left & right) Area of Use Vehicle manufacturer: VW Model: Golf Type: 1K (MK5) Model Year: 08/2003 – 05/2009 Submodell: AllDetails
Notice The fenders are 2,5cm wider and have the original look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount up to 235/30/20 Tyres on 9×20 ET46 wheels. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required. Trimming of the original arch liner is required to fit to the original arch line to the new wing.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£489.99 inc VAT -
Muecke VW MK7 Golf 7 widened wings 3cm
Golf Mk7 / Mk7.5 / Mk8, Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set left & right 3cm per side widened wings made of fiberglass, suitable for the original bumper
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£449.00 inc VAT -
SRS-Tec Wide Front Wing GT, VW Golf IV with indicator hole.
Shop by Car, Volkswagen, Golf Mk4 / Mk5 / Mk6, SRS-TecSRS-Tec Article Wide fender set GT (left & right) Version With cut outs for the oem indicators Area of Use Vehicle manufacturer: VW Modell: Golf Type: MK IV (1J) Model Year: 1997 – 2006 Submodell: All£449.99 inc VATDetails
Notice The fender are 2,5cm wider and have the OEM look. They can be mounted without any modification on the front bumper. With the fender it is possible to mount large wheels in combination with airride or deep Coilovers. Expert’s report German TÜV report Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the OEM fendersIncluded
SRS-Tec front Fender GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£449.99 inc VAT -
H&R Deep Coilover Kit for VW Caddy Mk3 / Mk4 Type 2K, 2KN inc Life + Maxi
Shop by Car, Volkswagen, Caddy, Caddy H&R Deep Coilover KitsH&R Deep coilovers are made exclusively for StillStatic in the Uk and offer more lowering than normal versions. We have coilovers suited to original top mounts and kits with adjustable camber top mounts. We also have an made to order custom rear beam for those looking for the ultimate set up. All suspension kits are based on monotube bilstein technology with H&R springs resulting superb performance or comfort when low. The caddy 2K platform coilover has an improved rear damper to help overcome the leaf spring movement common on these vehicles while still being suitable for carrying load when low. We have various options so if you are unsure of what is best suited for you please feel free to call us or contact us via email [email protected]£955.00 – £2,290.00 inc VAT£955.00 – £2,290.00 inc VAT -
SRS Rear Diffuser Cup, VW Polo 9N3
Shop by Car, Polo, SRS-Tec£199.99 inc VATDescription
Manufacturer SRS-Tec Article Rear Diffuser Cup Area of Use Vehicle manufacturer: VW Modell: Polo IV Type: 9N3 Model Year: 03/2005 – 05/2009 Submodell: all< Notice Nur passend für die Original VW Polo 9N3 Cup Heckstoßstange.Details
Notice Only for the original VW Polo 9N3 Cup rear bumper. Expert’s report German TÜV report StVZO § 19.2, no Registration required Material High quality german glass fibre reinforced plastic (GRP) Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Glued to the OEM rear bumper. No Modifications requiredIncluded
SRS-Tec rear diffuser Cup (unpainted) – TÜV report – Mounting material – Assembly Instructions£199.99 inc VAT -
MTS Technik Street Coilover for 2K/2KN Caddy Mk3 + Mk4
VW Caddy MTS Coilover kits, MTS SuspensionThe Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness. Coilover Kit Volkswagen Caddy III Coilover Kit MTS Technik for Volkswagen Caddy III, lowering both axles between 35 - 90 mm. Dedicated for the years of: 03/04 - 05/15, for the engine version: 1.2TSI / 1.4 / 1.6 / 2.0 / 1.6TDI / 1.9TDI / 2.0SDI / 2.0TDI. 2 years warranty 2 year warranty with no mileage limit to confirm high quality. High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials in either Zinc " Gold " or Stainless Steel " Inox ". Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance. Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work. Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height. Top mounts with camber adjustment The camber plates allow the wheel angle adjustment and increase the precision of driving. hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment. Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance. NEW Optional Stainless Steel "INOX" struts. Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry. Make Volkswagen Model Caddy III Type 2K/2C Engine 1.2TSI / 1.4 / 1.6 / 2.0 / 1.6TDI / 1.9TDI / 2.0SDI / 2.0TDI Year 03/04 - 05/15 Series: street Check Vehicle Data Max. Axle Load FA: -1075 kg Max. Axle Load RA: -1300 kg Check Vehicle Data Max. Axle Load FA : - 1075 kg to 1235kg Max. Axle Load RA: -1300 kg Lowering FA: 35 - 90 mm Lowering RA: 35 - 90 mm Camber / top mount FA: yes Camber / top mount RA: no Coilover Main Spring (Front): Spring rate (32 N/mm) TUV Certificate: no v3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear). 8 - Not for 4x4. 19 - Only for vehicles equipped with a one-piece leaf spring on the rear axle. If the vehicle is equipped with a two-part leaf spring on the rear axle a one-piece leaf spring has to be purchased seperately (while used in a Caddy - use VW part no. for leaf spring spring 2K0 511 151 N, while used in a Caddy Maxi use VW part no. for leaf spring spring 2K3 511 151 E). 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower. 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers. 44 - Installation of the rear axle adjustment must be carried out in accordance with the instruction. 45 - Front and rear axle height adjustable (threaded shock absorber housing on the front, provided adjustment plates + shock absorbers on the rear axle).£569.00 – £1,059.00 inc VAT£569.00 – £1,059.00 inc VAT -
H&R Electronic Damping Delete Kit
Shop by Product Type, Suspension, Shop by Car, Audi, BMW, Seat, Skoda, Volkswagen, Ford, Honda, Mercedes, Porsche, Vauxhall, A3 / S3 / RS3, A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A8 / S8 / RS8, TT / TTS/ TTRS, Polo, Golf, Passat, Transporter, R8, Scirocco / Corrado / Eos, 3 Series, 5 Series, 1 Series, Mini, Mini, M Series, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Lamborghini, 6 Series, T Roc, Tiguan, Touran, Passat CC, Octavia, Superb, Ibitha, Leon, 4 Series, 2 Series, Ateca, Kodiak, X Series, Suspension Electronics Delete Kits£318.99 – £458.99 inc VAT£318.99 – £458.99 inc VAT -
£469.99 inc VAT -
Muecke Audi A3 + S3 8V widened wing 3cm widened per side ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set fiberglass wing Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
MTS Technik Street Gold Mk2 Golf Coilover kit
VW Mk2 Golf MTS Coilover kits, MTS Suspension£569.00 – £799.00 inc VATCoilover Kit Volkswagen Golf II
Coilover Kit MTS Technik for Volkswagen Golf II, lowering the front axle between 30 - 80 mm, and rear between 25 - 80 mm. Dedicated for the years of: 08/83 - 12/92, for the engine version: 1.0 / 1.3 / 1.6 / 1.8 / 1.8 GTI / 1.8 16V GTI / 1.8 GTI G60 / 1.6D / 1.6TD.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.£569.00 – £799.00 inc VAT -
ID.Buzz Cargo H&R Deep Coilover
ID. BuzzNew developed H&R deep coilover for the ID.Buzz giving additional lowering range 40-80mm. Important to note is this is a special low version made for us by H&R Special Suspension Germany. Modifications and clearances maybe needed depending on the wheel and tyre combination used. Its possible to mount upto 22" wheels on this platform. Please contact us if you would like to know more on mounting this suspension kit , the first UK Buzz has now been dropped on this kit as shown in the gallery images. More products such as H&R Lowering springs, Adjustable Spring kits and Normal Version Coilovers are available [email protected] Suspension is made to order and delivered in approx 2 weeks.£1,630.00 – £1,940.00 inc VATNote: The picture may differ from the delivered productThe Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by H&R GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). Neither H&R GmbH or StillStatic Limited accepts liability for any damage that may occur as a result of non-compliance with the above points.£1,630.00 – £1,940.00 inc VAT -
Polo 6R/6C / Audi A1 Coilover Suspension Gepfeffert KW V2 Suspension 40-80mm
Shop by Car, Polo, KW Gepfeffert Coilover SuspensionVW Polo 5 (6R/6C) 2008-2017 Gepfeffert V2 Coilover£1,780.00 – £2,200.00 inc VATFits the following models:
- VW Polo 6R/6C
- Audi A1
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,780.00 – £2,200.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S8 – D2 (1994-2002)
A8 / S8 / RS8, Drivetech - Air Suspension£2,890.00 inc VAT£2,890.00 inc VAT -
H&R -130mm Rear Springs for Vehicles on Deep Coilovers ( Price Individually, Adjuster Not inc. )for VW Transporter T5/6 T25-30/32
Transporter H&R Deep CoiloversH&R Transporter replacement Rear Springs for Vehicles on Normal and Deep Coilovers ( Price Individually, Adjuster Not inc. ) for VW Transporter T5/6 T25-30/32, 130mm Version pictured.£120.00 – £190.00 inc VAT£120.00 – £190.00 inc VAT -
H&R Deep Coilover Kit for VW Scirocco III Type 13 = R ( 55mm Strut Clamp ) 50-110mm Stock Top Mount
Scirocco / Corrado / Eos, H&R Coilovers£1,360.49 inc VAT£1,360.49 inc VAT -
H&R Deep Coilover Kit for VW Golf Mk1 / Scirocco Mk1
Scirocco / Corrado / Eos, H&R Coilovers, Golf Mk1 / Mk2 / Mk3 H&R Deep Coilover Suspension£1,349.00 – £2,279.00 inc VAT
£1,349.00 – £2,279.00 inc VAT -
H&R Deep Coilover Kit for VW Polo 5 6R/6C1 very low 110mm
Suspension, H&R Coilover Suspension, Shop by Car, Volkswagen, Polo, H&R CoiloversH&R Deep Coilover Kit for VW POLO 5 (6R1, 6C1) | 03/2009 > Note: Prior to ordering check: Front top shock absorber fixation to the body with one nut, NOT for fixations with three bolts. This version is -20mm shorter than GFW50015-1 which lowers 90mm max Lowered front axle from [mm]: 80 • Lowering front axle up to [mm]: 100 Lowered rear axle from [mm]: 80 • Lowered rear axle up to [mm]: 110 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,799.99 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,799.99 inc VAT -
MTS Technik Coilover Kit BMW 5 Series / E39 Saloon
MTS Suspension, 5 Series MTS Technik Coilovers£339.00 – £819.00 inc VATCoilover Kit BMW 5 Series / E39 Sedan
Coilover Kit MTS Technik for BMW 5 Series / E39 Sedan, lowering only the front axle between 40-90 mm. Dedicated for the years of: 11/95 - 06/03, for the engine version: 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d.BMW 5 Series / E39 Sedan 520i / 523i / 525i / 528i / 530i / 535i / 540i / 520d / 525td / 525d / 525tds / 530d11/95 - 06/03BMW 5 Series / E39 Kombi 520i / 523i / 525i / 528i / 530i / 540i / 520d /525d / 525tds / 530d09/96 - 06/04Series: street Housing: gold
Max. Axle Load FA:-1105 kgMax. Axle Load RA:-1225 kgLowering FA: 40 - 90 mmLowering RA: 30 - 120 mmCamber / top mount FA: yesCamber / top mount RA: noCoilover Main Spring (Front): Spring rate (70 N/mm)Coilover Helper Spring (Front): Spring rate (20 N/mm)Coilover Main Spring (Rear): Spring rate (25 - 33,5 - 43 N/mm)TUV Certificate: noDownload information brochure: Download information brochure Download installation manual: Download installation manual 2 - Front and rear axle height adjustable (threaded shock absorber housing).8 - Not for 4x4.12 - Only for vehicles without EDC.21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.34 -Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: 2x dome bearing (BMW part: 31336752735), 2x washer (BMW part: 31336776760), 2x sealing washer (BMW part: 31331110196). REAR AXLE: 2x supporting bearing (BMW part: 33521091710), 2x supporting pot (BMW part: 33521090282), 2x washer (BMW part: 33521092986).73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the “foaming” effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry. £339.00 – £819.00 inc VAT -
MTS Technik Street Coilover Kit Mercedes-Benz 190 (W201 ) + W124 , A125, C124
Shop by Car, Mercedes, MTS Suspension, Mercedes MTS Coilover KitsCoilover Kit Mercedes-Benz 190 (W201) Coilover Kit MTS Technik for Mercedes-Benz 190 (W201), lowering the front axle between 30 - 75 mm, and rear between 20 - 65 mm. Dedicated for the years of: 10/82 - 08/93, for the engine version: 190 / 190E / 190E 1.8 / 190E 2.0 / 190E 2.3 / 190E 2.3 16V / 190E 2.5 16V / 190E 2.6 / 190D / 190D 2.0 / 190D 2.5 / 190D 2.5 Turbo. Series: street Max. Axle Load FA: -1050 kg Max. Axle Load RA: -1150 kg Lowering FA: 30 - 75 mm Lowering RA: 20 - 65 mm Camber / top mount FA: no Camber / top mount RA: no Coilover Main Spring (Front): Spring rate (163,5 N/mm) Coilover Main Spring (Rear): Spring rate (100,5 N/mm) TUV Certificate: yes 8 - Not for 4x4. 9 - Only for vehicles without NIVO / OEM pneumatic suspension. 16 - Front and rear height adjustable axle (front and rear springs with height adjustment element + shock absorbers). 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower. 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers. 36 - Rear thread adjustment block is mounted on the bottom. 37 - Front thread adjustment block is mounted on the top. 41 - Excl. AMG. 73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.£659.00 inc VAT2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Fits the following Vehicles :
Mercedes-Benz Sedan (W124) 12/84 - 08/93
Mercedes-Benz 190 (W201) 190 / 190E / 190E 1.8 / 190E 2.0 / 190E 2.3 / 190E 2.3 16V / 190E 2.5 16V / 190E 2.6 / 190D / 190D 2.0 / 190D 2.5 / 190D 2.5 TURBO 10/82 - 08/93
Mercedes-Benz Cabriolet (A124) 300E / 300E-24 09/91 - 06/93
Mercedes-Benz Coupe (C124) 220E / 230E / 260E / 280E / 250D / 250TD / 300D 03/87 - 05/93
Mercedes-Benz E-Class Cabriolet (A124) E200 / E220 / E320 05/93 - 03/98
Mercedes-Benz E-Class Coupe (C124) E200 / E220 / E320 06/93 - 06/97
Mercedes-Benz E-Class Sedan (W124)E200 / E220 / E280 / E320 / E200D / E230D / E250D / E250TD / E300D / E300TD02/93 - 06/96 £659.00 inc VAT -
Gepfeffert KW V3 Coilover Suspension Audi B5 S4 RS4
A4 / S4 / RS4, KW Gepfeffert Coilover SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi B5 S4 + RS4 - Lowering range 50-120mm , VW Inox Stainless Steel bodies.£1,810.00 – £2,490.00 inc VATFor more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,810.00 – £2,490.00 inc VAT -
Mk2 Golf SRS-tec 2.2cm Wider Wings ( Pair )
Volkswagen, Golf Mk1 / Mk2 / Mk3, SRS-TecNote The fenders in the original design are widened by 2.2 cm on each side. Optimally suited for extreme lowering. Supplied unpainted, in GRP. primer. Supplied as a pair, made to order.£479.99 inc VAT£479.99 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, AUDI RS3 8V Facelift Saloon
SRS-Tec, A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£539.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Make: AUDI Modell: RS3 Type: 8V Model Year: 08/2017 – Submodell: Limousine / Saloon Notice 2,5cm wider per side then the stock wings. Wings can be mounted without any modification on the front bumper. Fit only for RS3 8V facelift Saloon only.£539.99 inc VAT -
SRS-Tec Wide Wings GT, VW Up! ( Clean – No Indicator Hole )
UpSRS-Tec wide fender set GT Clean left & right (unpainted) 2,5cm wider then the stock fenders. Ideal for Airride or deep Threaded Suspension and the Assembly Of up to 18 Inch Wheels. Gallery poictures show wings both with and without indicator holes.£449.99 inc VAT£449.99 inc VAT
