-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
H&R Electronic Damping Delete Kit
Shop by Product Type, Suspension, Shop by Car, Audi, BMW, Seat, Skoda, Volkswagen, Ford, Honda, Mercedes, Porsche, Vauxhall, A3 / S3 / RS3, A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A8 / S8 / RS8, TT / TTS/ TTRS, Polo, Golf, Passat, Transporter, R8, Scirocco / Corrado / Eos, 3 Series, 5 Series, 1 Series, Mini, Mini, M Series, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Lamborghini, 6 Series, T Roc, Tiguan, Touran, Passat CC, Octavia, Superb, Ibitha, Leon, 4 Series, 2 Series, Ateca, Kodiak, X Series, Suspension Electronics Delete Kits£318.99 – £458.99 inc VAT£318.99 – £458.99 inc VAT -
Muecke Audi A3 + S3 8V widened wing 3cm widened per side ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set fiberglass wing Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
Please contact us about Muecke wings, as Brexit changes are changing how these can be shipped. They can be ordered, but please contact us to do so.
£449.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S8 – D2 (1994-2002)
A8 / S8 / RS8, Drivetech - Air Suspension£2,890.00 inc VAT£2,890.00 inc VAT -
Gepfeffert KW V3 Coilover Suspension Audi B5 S4 RS4
A4 / S4 / RS4, KW Gepfeffert Coilover SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi B5 S4 + RS4 - Lowering range 50-120mm , VW Inox Stainless Steel bodies.£1,810.00 – £2,490.00 inc VATFor more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in rebound - damping technology adjustable in compression - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,810.00 – £2,490.00 inc VAT -
SRS-Tec 2.5cm Wider Wings GT, AUDI RS3 8V Facelift Saloon
SRS-Tec, A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£539.99 inc VATDescription
Manufacturer SRS-Tec Article Wider front fenders GT (left & right) Make: AUDI Modell: RS3 Type: 8V Model Year: 08/2017 – Submodell: Limousine / Saloon Notice 2,5cm wider per side then the stock wings. Wings can be mounted without any modification on the front bumper. Fit only for RS3 8V facelift Saloon only.£539.99 inc VAT -
Muecke 3cm Wider Wings Audi RS3 8V ( Inc Facelift )
Muecke-Carbon & Bodywork Parts ( Wider Wings ), A3 / S3 / RS3 H&R Deep Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air SuspensionWhen lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£449.00 inc VAT- 1 set fiberglass fender Re-Li for Audi A3 8v widened 3 cm per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- not suitable for saloon
- fits both pre facelift and facelift
£449.00 inc VAT -
H&R Deep Coilover Kit for Audi TT 8N, 4WD / S3 (L) / A3 (L) 50-110mm ( with shorter rear damper )
A3 / S3 / RS3 H&R Deep Coilover Suspension, Audi TT TTS TTRS H&R Deep Suspension£1,663.99 inc VAT
£1,663.99 inc VAT -
£1,513.99 inc VAT
-
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm Fixed damping:
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover SuspensionH&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm fixed damping Fits RS6 C6 4F C7 4G£1,885.00 inc VAT£1,885.00 inc VAT -
H&R Deep Coilover Kit for Audi TT 8N 50-110mm Quattro S3 + A3 Quattro:
TT / TTS/ TTRS£1,450.49 inc VAT£1,450.49 inc VAT -
Muecke Audi TT 8J widened wings 3cm
TT / TTS/ TTRS, Muecke-Carbon & Bodywork Parts ( Wider Wings )£449.00 inc VAT- 1 set of fiberglass Audi TT 8 J wing GFK 3 cm wider per side
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
£449.00 inc VAT -
H&R Deep Coilover Kit for Audi S3 8Y / RS3 Limo 8YA
A3 / S3 / RS3 H&R Deep Coilover Suspension£2,029.00 – £2,939.99 inc VATH&R Deep Coilover Kit for : H&R Deep Coilover Kit for Audi A3 / S3 8Y / RS3 8YA Limo 2019> Lowering 40-80mm EDC cancellation kit 93068-1 These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThe Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,029.00 – £2,939.99 inc VAT -
Audi A1 S1 8X Coilover Suspension Gepfeffert KW V2 Suspension 45-90mm
Shop by Car, Audi, Polo, A1 / S1, KW Gepfeffert Coilover SuspensionAudi S1 8X Quattro ( 170 KW ) 2014> Gepfeffert V2 Coilover£1,790.00 – £2,290.00 inc VATFits the following models:
- Aud S1 8X 2014>
Gepfeffert V2 with / without adjustable camber adjustable top mounts
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,790.00 – £2,290.00 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Saloon 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,959.99 inc VATH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Saloon Low Version 50-120mm 09/98>
RSS-13-471-5/2SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Avant model please check RSS-13-471-5/1SC For any queries please contact [email protected]£1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate S2 Lim. – Avant 4WD 50-100mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 (8C ) Saloon + Estate 4WD S2 Lim. - Avant 09/91>94 5+6 cylinder This suspension is made with modular race springs.£1,959.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mmThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
Gepfeffert KW Coilover VW Mk4 Audi A38L TT8N Beetle Bora Seat Leon 1M – 2WD
Audi, A3 / S3 / RS3, KW Gepfeffert Coilover Suspension, Seat Leon KW Gepfeffert Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension, Golf Mk4 / Mk5 / Mk6 Gepfeffert Coilovers£1,695.00 – £2,020.00 inc VATGepfeffert KW Coilover suspension 2WD (low version)
Fits the following models:
- VW Golf IV / Beetle / Bora
- Audi TT 8N / A3 8L
- Seat Leon 1M
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information: V2
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use Technical information: V3
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - komplette Dokumentation für einfache Anwendung £1,695.00 – £2,020.00 inc VAT -
Gepfeffert V3 KW Coilover Audi RS3 8Y 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,450.00 – £2,920.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi RS3 8Y
- DDC Delete kit maybe required
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,450.00 – £2,920.00 inc VAT -
-
Gepfeffert V3 KW Coilover Suspension Audi RS6 RS7 C7 4G
Shop by Product Type, Suspension, A6 / S6 / RS6, A7 / S7 / RS7, KW Gepfeffert Coilover Suspension£3,610.00 inc VATGepfeffert KW coilover suspension V3 Audi RS6 / RS7 (4G/C7) with MR/DRC decommissioning kit
Lowering range 40-95mm.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product– damping technology adjustable in rebound – damping technology adjustable in compression – Stainless steel technology inox-line – Individual, stepless lowering – tested adjustment range – ready-to-install complete solution – High quality components for long service life – complete documentation for easy use This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£3,610.00 inc VAT -
Gepfeffert V3 KW Coilover Audi TT TTS TTRS 8S 4WD
KW Gepfeffert Coilover Suspension, Mk7 / 7.5 / Mk8 KW Gepfeffert Coilover, Audi TT TTS TTRS KW Gepfeffert Suspension£2,370.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi TT 4 motion
- Audi TTS
- Audi TTRS
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,370.00 – £2,720.00 inc VAT -
-
Gepfeffert V2 KW Coilover Audi TT TTS TTRS 8S 4WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,095.00 inc VATFits the following models:
- Audi TT 4 motion
- Audi TTS
- Audi TTRS
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Audi A3 S3 RS3 8V 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,095.00 inc VATFits the following models:
- Audi A3 8v 4motion
- Audi S3 8V
- Audi RS3 8V
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,095.00 inc VAT -
Gepfeffert V3 KW Coilover Audi A3 S3 RS3 8V 4WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£2,370.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.-
Fits the following models:
- Audi A3 8v 4motion
- Audi S3 8V
- Audi RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,370.00 – £2,720.00 inc VAT -
-
Gepfeffert KW DDC Plug and Play Coilovers Audi TT TTS TTRS 8S 2WD + 4WD 35-70mm
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,980.00 inc VATFits the following models:
- Audi TTS 8S
- Audi TTRS 8S
- Audi TT 8S
Gepfeffert DDC without adjustable camber dome bearings
The gepfeffert DDC without adjustable camber dome bearings is mounted with the standard support bearings. We refer to the gepfeffert chassis without camber dome bearings as the "small depth version". Definition "small depth version": We distinguish here coilovers of the brand gepfeffert.com made by KW, with or without adjustable camber dome bearings (model & platform dependent). The suspensions without camber dome bearings have up to 35mm more lowering, compared to a standard KW coilover suspension. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW coilover suspension: adjustment range 35-70mm
- Series KW coilover suspension: adjustment range 20-45mm
- GEPFEFFERT KW "small depth version" without camber dome bearing: adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Individual or maximum lowering
KW DDC coilovers are the intelligent suspension solution for retrofitting from the KW iSuspension product range. They combine the advantages of an adaptive damping system with a stylish and sporty lowering according to your individual ideas. The adaptive KW coilovers are available as KW DDC Plug & Play variants for vehicle models with electronically controlled standard suspension.More comfort or more sport - you decide
More and more premium vehicles today are equipped with an adaptive suspension system. Until the market launch of KW DDC Plug & Play, you often had to compromise on an individual desired lowering and often even do without your extra paid active control systems and comfort features. In contrast, with the adaptive KW DDC Plug & Play coilovers, you are free of compromises and can combine the control of your standard damper system with a stepless lowering and the driving dynamics of a KW coilover suspension.The gepfeffert.com® DDC Plug & Play coilover suspension made by KW
During installation, the standard struts are simply replaced with the KW struts manufactured in stainless steel technology "inox-line" and the adaptive KW dampers are connected to the standard on-board electronics using the original connectors from your car manufacturer. No further assembly steps are necessary with the KW DDC Plug & Play coilovers. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover suspension. The existing control system and the switch installed in the interior for operating the damper control are retained.Technical information:
The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .
Note: The picture may differ from the delivered product- Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,980.00 inc VAT -
Gepfeffert V3 KW Coilover Audi TT 8S 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V3 KW Coilover Audi A3 8V 2WD
Shop by Car, KW Gepfeffert Coilover Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,205.00 – £2,720.00 inc VATThis version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.Fits the following models:
- VW Golf VII R
- Audi S3 8V / RS3 8V
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £2,205.00 – £2,720.00 inc VAT -
Gepfeffert V2 KW Coilover Audi TT 8S 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V2 KW Coilover Audi A3 8V 2WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£1,730.00 – £2,095.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V2 with and without adjustable camber dome bearings
The gepfeffert V2 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to tune the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable rebound damping.
The KW coilover suspension variant 2 "inox-line" is the suspension for the experienced sports driver who wants to make adjustments to the setup in addition to lowering the vehicle individually. The individually adjustable rebound damping ensures better connection on fast road sections and easier vehicle control. In addition, rolling comfort on bad roads can be significantly influenced with adjusted rebound damping.The gepfeffert.com® V2 coilover suspension made by KW
With the KW coilover suspension variant 2 "inox-line", you can influence the handling and comfort yourself as an experienced sports driver through the individually adjustable rebound tuning. The 16 exact clicks allow you to tune the KW dampers tighter or more comfortable without affecting the bottom valve of the compression stage.Technical information:
This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
Note: The picture may differ from the delivered product- damping technology adjustable in the rebound stage in 16 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use £1,730.00 – £2,095.00 inc VAT -
Gepfeffert V1 KW Coilover Audi TT 8S with camber adjustable top mounts 2WD
KW Gepfeffert Coilover Suspension, Audi TT TTS TTRS KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert V1 KW Coilover Audi A3 8V with camber adjustable top mounts 2WD
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert Suspension£1,730.00 inc VATFits the following models:
- VW Golf VII
- Audi TT 8S / A3 8V
- Skoda Octavia 5E
- Seat Leon 5F
Gepfeffert V1 with adjustable camber adjustable top mounts
The gepfeffert V1 with adjustable camber dome bearings is mounted plug and play in the vehicle, without using original installed suspension components with. The chassis with adjustable camber dome bearings have compared to our gepfeffert KW "small depth versions" (without camber dome bearings) an even greater "scope" for even more lowering and even more upgrade options to be able to adjust the vehicle even more individually to the requirements of each driver. Example Golf 7 GTI:- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
Balance of sportiness, comfort and safety.
The KW coilover suspension variant 1 "inox-line" is the ideal entry-level system for customers who want to determine a technically maximum possible or an individual lowering themselves. In elaborate driving tests, our experienced engineers have developed a setup that is suitable for the target group by determining an optimum balance of sportiness, comfort and safety and have implemented it directly in the series.The gepfeffert.com® V1 coilover suspension made by KW
Variant 1 "inox-line" has a vehicle-specific, permanently configured damper setup with a sporty, harmonious set-up so that you experience an optimum balance of sportiness and everyday usability when driving. Even with a full payload and maximum axle loads, the dampers always operate with a sporty characteristic curve. The KW variant 1 allows maximum or individual lowering in the tested adjustment range. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even after years.Technical information:
Note: The picture may differ from the delivered product- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - individually height adjustable - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy handling £1,730.00 inc VAT -
Gepfeffert KW DDC Plug and Play Coilovers Audi S3 / RS3 8Y ( GY) 35-70mm
KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert SuspensionGepfeffert KW Coilover suspension for Audi S3 and RS3 8Y chassis, for use with original top mounts and retaining DDC Plug and Play function. This version offers more lowering range than the normal KW version. The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. Special order item terms and conditions apply. *On back order items : These are a custom made to order items and can take 6-8 weeks for delivery please contact us before purchase .£2,980.00 inc VAT£2,980.00 inc VAT -
Gepfeffert KW V3 Coilovers Audi RSQ3 8U
Shop by Car, Audi, A3 / S3 / RS3, KW Gepfeffert Coilover Suspension, Audi A3 S3 RS3 KW Gepfeffert SuspensionGepfeffert KW Coilovers with adjustable top mounts made by KW Suspension exclusively for Gepfeffert.com and imported by StillStatic. To fit Audi RSQ3 type 8U - Lowering range 45-80mm , VW Inox Stainless Steel bodies including Adjustable top mounts Example Golf 7 GTI:£2,490.00 – £2,955.00 inc VAT- Series KW coilover suspension: adjustment range 20-45mm (without camber dome bearing)
- GEPFEFFERT KW "small depth version" (without camber dome bearing): adjustment range 35-70mm
- GEPFEFFERT KW with adjustable camber dome bearings: adjustment range 45-95mm (upgrade possibilities with other spring systems up to 130mm possible)
For more stability or ride comfort. With adjustable compression and rebound damping.
The KW coilover suspension variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness in their vehicles. The separately adjustable dampers in rebound and compression with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to directly influence turn-in behavior, directional stability, tire grip and handling characteristics to ensure safe controllability at the limit.The gepfeffert.com® V3 coilover suspension made by KW
Via the separately and independently adjustable compression and rebound damping, the damper setup can be adapted to individual preferences in driving behavior or also to vehicle changes, such as weight, tire characteristics or altered vehicle stiffness. Only through this unique patented system is true performance optimization possible. For example, the pressure damping force can be increased to demand more grip from the tire, improve turn-in behavior and reduce start-up pitching, without simultaneously changing the rebound damping that optimally matches the spring rate, which would have a grip-reducing effect and thus result in a loss of performance.Technical information:
- damping technology adjustable in the rebound stage in 16 exact clicks - damping technology adjustable in the compression stage in 12 exact clicks - Stainless steel technology inox-line - Individual, stepless lowering - tested adjustment range - ready-to-install complete solution - High quality components for long service life - complete documentation for easy use The Product is a version that can achieve lowering beyond the KW standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by KW automotive GmbH or StillStatic Limited After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£2,490.00 – £2,955.00 inc VAT -
Gepfeffert GFW V3 Audi RSQ3 Typ 8U/F3 With camber adjustable top mount (60-110mm)
Shop by Car, Audi, Q3 / RSQ3, KW Gepfeffert Coilover Suspension£2,420.00 – £2,878.99 inc VATKW low Coilover suspension with hardness adjustment and support bearings from gepfeffert.com (by KW).
Adjustment range: 60-110mm lowering
V3: adjustable compression and rebound
Clamp diameter: 55mm
Suitable for the following models:
Audi RSQ3 (8U) 2013-2016 *
Audi RSQ3 (F3) from 2019
The Product is a version with extreme lowering beyond the KW standard lowering adjustment area.
Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by KW automotive GmbH or StillStatic Limited
After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions.
If necessary, the vehicle ride height must be adjusted higher or the rebound suspension travel must be additionally limited. In any case, however, the national legally prescribed minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc.).
KW automotive GmbH and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.
£2,420.00 – £2,878.99 inc VAT -
SRS-Tec Wide Wings GT, Audi TT 8J
TT / TTS/ TTRS, SRS-Tec£489.99 inc VATDescription
Manufacturer SRS-Tec Article Wide fender set GT (left & right) Area of use Make: AUDI Modell: TT Type: 8J Model Year: 04/2006 – 03/2014 Submodell: Roadster & Coupe Engine: AllDetails
Notice 3cm wider then the stock fenders. OEM Design. Fenders are mounted without any modification on the front bumper. Expert’s report German TÜV report Material Made in Germany – GRP composite Product copyright The copying of our parts and our designs will be prosecuted!Assembly Instructions
Like the stock fenders, no modifications required.Included
SRS-Tec wide fender set GT left & right (unpainted) – TÜV report – Fitting material – Fitting instructions£489.99 inc VAT -
H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8S
H&R Coilovers, Audi TT TTS TTRS H&R Deep Suspension£1,449.99 – £2,939.99 inc VATH&R Deep Coilover Kit for : Audi TT 8S 2Wd 08/12> Audi TTS TTRS 8S 4wd 2013> For electronic damping models use delete kit p/n 93005-1 for years upto 2014 and 93008-1 after 2014. H&R Deep Coilovers are made by H&R Special Suspension for StillStatic un the UK. These version offer more lowering than the "normal" monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house "100% german made " ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,449.99 – £2,939.99 inc VAT -
Sold out
HP Drivetech Air Suspension Kit for Audi S1 – 8X
Shop by Car, Audi, Drivetech - Air Suspension, A1 / S1£2,129.00 inc VAT£2,129.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A6 – C8/4K (2019- )
A6 / S6 / RS6, Drivetech - Air SuspensionThe “ Drivetech Suspensions Airride Kit – Audi MLB-Evo ” fits the following VAG vehicles on the MLB-Evo platform, with 2WD & 4WD drive and a strut clamp diameter of 53mm on the front axle: Audi A4 B9, Audi A5 F5, A6 C8, A7 C8, Audi A8 D5 Important: Measure the shock absorber in advance! The kit includes: 2x Drivetech Suspensions shock absorbers for the front axle 2x Drivetech Suspensions single-fold air bellows for the front axle 2x Drivetech Suspensions shock absorbers for the rear axle 2x Continental tapered rolling bellows for the rear axle 2x steel braided line - Drivetech Uniball dome bearing kit - Audi MLB-Evo incl. Uniball nut - M12x1, 5 & washer – spherical plain bearing GE18-M12 – fastening material for the rear air bellows – TÜV report£3,229.00 inc VAT£3,229.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi TT RS – 8S (2014-)
Shop by Car, Audi, TT / TTS/ TTRS, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi TT RS – 8J (2006-2014)
Audi, TT / TTS/ TTRS, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi TT – 8S (2014- )
Audi, TT / TTS/ TTRS, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi TT – 8J (2006-2014)
Audi, TT / TTS/ TTRS, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi SQ5 – FY (2017- )
Audi, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi SQ5 – 8R (2012-2017)
Audi, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S8 – D4 (2009-2017)
A8 / S8 / RS8, Drivetech - Air Suspension£3,140.00 inc VAT£3,140.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S8 – D3 (2002-2010)
A8 / S8 / RS8, Drivetech - Air Suspension£3,140.00 inc VAT£3,140.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S7 – C7/4G (2010- )
A7 / S7 / RS7, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S6 – C7/4G (2010- )
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S6 – C6/4F (2004-2011)
A5 / S5 / RS5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S5 – F5 (2016- )
Audi, A5 / S5 / RS5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S5 – 8T (2007-2016)
A5 / S5 / RS5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S4 – B9/8W (2015- )
Audi, A4 / S4 / RS4, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S4 – B8/8K (2007-2015)
A4 / S4 / RS4, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S4 – B6/8E (2000-2004)
A4 / S4 / RS4, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S4 – B7/8E (2004-2008)
Audi, A4 / S4 / RS4, Drivetech - Air Suspension£3,450.00 inc VAT£3,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S4 – B5/8D (1994-2001)
A4 / S4 / RS4, Drivetech - Air Suspension£3,450.00 inc VAT£3,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S3 – 8V (2012- )
A3 / S3 / RS3, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S3 – 8P (2003-2013)
A3 / S3 / RS3, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi S3 – 8L + Audi TT 8N Quattro (1996-2003)
TT / TTS/ TTRS, Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS7 – C7/4G (2010- )
A7 / S7 / RS7, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS6 – C7/4G (2010- )
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS6 – C6/4F (2004-2011)
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS5 – F5 (2016- )
A5 / S5 / RS5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS5 – 8T (2007-2016)
A5 / S5 / RS5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS4 – B9/8W (2015- )
Audi, A4 / S4 / RS4, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS4 – B8/8K (2007-2015)
A4 / S4 / RS4, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS4 – B7/8E (2004-2008)
A4 / S4 / RS4, Drivetech - Air Suspension£3,450.00 inc VAT£3,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS4 – B5/8D (1994-2001)
A4 / S4 / RS4, Drivetech - Air Suspension£3,450.00 inc VAT£3,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS3 – 8V (2012- )
Audi, A3 / S3 / RS3, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi RS3 – 8P (2003-2013)
Audi, A3 / S3 / RS3, Drivetech - Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
Sold out
HP Drivetech Air Suspension Kit for Audi R8 – 4S (2015- ) Adjustable Damping
Shop by Car, Audi, R8, Drivetech - Air Suspension£5,020.00 inc VAT£5,020.00 inc VAT -
Sold out
HP Drivetech Air Suspension Kit for Audi R8 – 42 (2006-2015) Adjustable Damping
Shop by Car, Audi, R8, Drivetech - Air Suspension£5,020.00 inc VAT£5,020.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q7 – 4M (2015- )
Shop by Car, Drivetech - Air Suspension, Q7 / SQ7The Audi Q7 is 7 seat large SUV is an a big cruiser and needs a tailored Air Suspension kit to suit. Drietech have engineered an Air suspension which includes an uprated rear air bags so that a reasonable pressure when raised retains a comfortable ride, the front suspension comes with a replacement spherical front top mounts to allow correct fitment of the new air suspension struts.£3,300.00 inc VAT£3,300.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q5 Quattro – FY (2017- )
Shop by Car, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q5 Quattro – 8R (2012-2017)
Shop by Car, Audi, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q5 – FY (2017- )
Shop by Car, Audi, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q5 – 8R (2012-2017)
Shop by Car, Audi, Q5 / SQ5, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q3 – 8U (2011- )
Shop by Car, Audi, Q3 / RSQ3, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi Q2 – GA (2016- )
Shop by Car, Audi, Q2, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
£2,320.00 inc VAT
-
HP Drivetech Air Suspension Kit for Audi A8 – D4 ( Including uniball top mounts )(2009-2017)
A8 / S8 / RS8£3,540.00 inc VAT£3,540.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A8 – D3 ( including Uniball Top Mounts ) (2002-2010)
A8 / S8 / RS8£3,540.00 inc VAT£3,540.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A8 – D2 ( including uniball top mounts )(1994-2002)
A8 / S8 / RS8£3,540.00 inc VAT£3,540.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A7 Quattro – C7/4G (2010-2019)
A7 / S7 / RS7, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A7 – C7/4G (2010-2019)
A7 / S7 / RS7, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A6 Quattro – C7/4G (2010-2019)
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A6 Quattro – C6/4F (2004-2011)
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A6 – C7/4G (2010-2019)
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A6 – C6/4F (2004-2011)
A6 / S6 / RS6, Drivetech - Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
£2,320.00 inc VAT
-
HP Drivetech Air Suspension Kit for Audi A5 Quattro – 8T (2007-2016)
A5 / S5 / RS5£2,320.00 inc VAT£2,320.00 inc VAT -
£2,320.00 inc VAT
-
£2,320.00 inc VAT
-
HP Drivetech Air Suspension Kit for Audi A4 Quattro – B9/8W (2015- )
A4 / S4 / RS4£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A4 Quattro – B8/8K (2007-2015)
A4 / S4 / RS4£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A4 Quattro – B7/8E (2004-2008)
A4 / S4 / RS4£3,450.00 inc VAT£3,450.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A4 Quattro – B6/8E (2000-2004)
A4 / S4 / RS4£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A4 Quattro – B5/8D (1994-2001)
A4 / S4 / RS4£3,450.00 inc VAT£3,450.00 inc VAT -
£2,320.00 inc VAT
-
£2,320.00 inc VAT
-
£3,450.00 inc VAT
-
£2,320.00 inc VAT
-
£3,450.00 inc VAT
-
HP Drivetech Air Suspension Kit for Audi A3 Sportback – 8V (2012- )
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 Quattro – 8L (1996-2003)
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 Cabrio – 8V (2012- )
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 Cabrio – 8P (2003-2013)
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 – 8V (2012- )
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 – 8P (2003-2013)
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 – £2,550.00 inc VAT£2,320.00 – £2,550.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi A3 – 8L (1996-2003)
Drivetech - Air Suspension, A3 / S3 / RS3 HP Drivetech Air Suspension£2,320.00 inc VAT£2,320.00 inc VAT -
HP Drivetech Air Suspension Kit for Audi 100 Coupe – C1 (1970-1976) * please check
100, Drivetech - Air Suspension£2,450.00 inc VAT£2,450.00 inc VAT -
H&R Deep Coilover Kit for Audi TT / TTS / TTRS 8J
H&R Coilovers, Audi TT TTS TTRS H&R Deep Suspension£1,290.00 – £2,925.00 inc VAT
£1,290.00 – £2,925.00 inc VAT -
H&R Deep Coilover Kit for Audi Q2 Quattro 4WD:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Q2, H&R Coilovers£2,505.49 inc VAT£2,505.49 inc VAT -
H&R Deep Coilover Kit for Audi Q2 Quattro 4WD: 70-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, Q2, H&R Coilovers£2,257.49 inc VAT£2,257.49 inc VAT -
H&R Deep Coilover Kit for Audi R8 (2015–present: Type 4S) 40-95mm aluminium body hardness adjustable: Delete kit for MRC required
Audi, R8, H&R Coilovers£3,950.00 inc VATH&R RSS Deep Coilovers
The H&R Deep Coilover Kit is designed to offer more lowering than normal version coilovers while still retaining comfort. H&R’s Deep Kits are derived from the suspension specialist’s championship-winning Race Kits and Ultra Low kits. They’re designed to improve performance when wound down. A Deep Kit will ensure you’re low without sacrificing handling or ride quality. A benefit of having a low coilover is that you dont need to use all the threads meaning more damper travel and better wheel clearance, StillStatic is the official UK reseller for H&R Deep Kits so we offer the correct advice and fitment. This application has hardness adjustment. The image displayed may vary slightly from the delivered product. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range of 40mm. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard will not be borne by H&R Special Suspension or StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher or the hardness of suspension travel must be additionally limited. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). H&R Special Suspension and / or StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points. All suspension is made to order approx 2 weeks. As this suspension is not compatible with the original MRC a Delete kit for MRC required. It is possible to add front lift system from Hybridair with this coilover system. Please contact us for more information. Need help ? We are happy to assist you. [email protected]£3,950.00 inc VAT -
H&R Deep Coilover Kit for A4 B7/8E Quattro with race springs R: (Rear):
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,513.99 inc VAT£1,513.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 89 ( B3 ) 2WD Coupe Saloon
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – AUDI 80 Type 89 2WD models only To fit : Coupe, Saloon, 10/86> ( For Cabrio / Coupe models 91 / 02 > please send us an enquiry ) For 4WD 89Q models please check GFW50503-5 / GFW50503-5-14 This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] lowering of between 70mm - 120mm is possible.£1,899.99 inc VAT£1,899.99 inc VAT -
H&R Deep Coilover Kit with Hardness Adjustment for Audi R8 2006>2015 ( Type 42 ) V8 + V10 Lowering : 40-95mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, R8, H&R Coilovers£2,604.49 inc VAT
£2,604.49 inc VAT -
H&R Deep Coilover Kit for Audi A8 + S8, Type D2 R: 55-70 / F: 60-100mm: (No rear Height adjustment )
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A8 / S8 / RS8, H&R Coilovers£2,368.99 inc VAT£2,368.99 inc VAT -
£1,527.49 inc VAT
-
£1,527.49 inc VAT
-
£1,439.99 inc VAT
-
£1,885.99 inc VAT
-
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform 70-140mm: with damping adjustment
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover Suspension£2,531.99 inc VAT£2,531.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform 70-140mm: fixed damping
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover Suspension£1,761.99 inc VAT£1,761.99 inc VAT -
H&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm With damping adjustment:
A4 / S4 / RS4, A5 / S5 / RS5, A6 / S6 / RS6, A7 / S7 / RS7, Q5 / SQ5, RSS Race Coilover SuspensionH&R Race Coilover Kit for Audi A4 + A5 + A6 + A7 B8 Platform incl. Q5 50-120mm With damping adjustment: Fits Audi RS6 C6 C7 delete kits also availble£2,695.00 inc VAT£2,695.00 inc VAT -
H&R Deep RSS Coilover Kit for Audi B8/QB6 S4 + RS4 50-120mm inc DRC delete kit.
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R CoiloversThe Race Kits utilise Bilstein’s renowned monotube damper technology, the same technology used by BMW’s official DTM teams. The steel dampers benefit from a triple-galvanised coating as well as H&R’s own special protective layer to hold back corrosion. Combined with H&R’s race-spec modular springs these coilovers deliver maximum performance. All applications are height adjustable and some applications have an extra-cost option for 18 damper settings. Lowering Range for this coilover 50-120mm Kits available as fixed damping or with hardness adjustment. Please contact us [email protected] for further queries.£1,985.00 – £2,720.00 inc VAT£1,985.00 – £2,720.00 inc VAT -
H&R Race Coilover Kit for Audi RS4 Avant B5 (8D) Low Version 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£2,019.99 inc VATH&R Race Derived Coilover Kit for Audi RS4 Avant B5 (8D) Avant 2000>
RSS-13-372-1/2SC Fixed damping monotube coilover system. For any queries please contact [email protected]£2,019.99 inc VAT -
H&R Race Coilover Kit for Audi RS4 Avant B5 (8D) 40-90mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£2,019.99 inc VATH&R Race Derived Coilover Kit for Audi RS4 Avant B5 (8D) Avant 2000>
RSS-13-372-1/1SC Fixed damping monotube coilover system. For any queries please contact [email protected]£2,019.99 inc VAT -
H&R Race Coilover Kit for Audi S4 B5 Avant 50-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, A4 / S4 / RS4, H&R Coilovers£1,959.99 inc VATH&R Race Derived Coilover Kit for Audi S4 B5 ( 8D ) Avant Low Version 50-120mm 09/98>
RSS-13-471-5/1SC Fixed damping H&R Deep coilover for Audi S4 B8 lowering 50-120mm. For Saloon model please check RSS-13-471-5/2 For any queries please contact [email protected]£1,959.99 inc VAT -
£1,340.99 inc VAT
-
£1,340.99 inc VAT
-
£1,266.49 inc VAT
-
H&R Deep Coilover Kit for Audi S2 (B4 – 8C) / RS2 (P1) Avant 4WD
Suspension, H&R Coilover Suspension, Shop by Car, Audi, H&R CoiloversAudi H&R DEEP Coilovers – H&R Deep Coilover Kit for Audi S2 (B4 - 8C) / RS2 (P1) Avant 4WD 09/91>94 ( reference Rotiform Blue RS2 )£2,219.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 70-120mm + very lowThis is a custom made “Deep” version coilover kit made to order. £2,219.99 inc VAT -
H&R Deep Coilover Kit for Audi 100 Saloon Type 44 C3, 2WD: (mm lowering please ask)
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 100, H&R Coilovers£2,752.99 inc VAT£2,752.99 inc VAT -
H&R Deep Coilover Kit for Audi 100 C1: (mm lowering please ask) Front struts only
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 100, H&R Coilovers£1,266.49 inc VAT£1,266.49 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Saloon + Estate 4WD 50-100mm:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – Audi 80 B4 Saloon + Estate 4WD ( 4cylinder models ) for 5+6 cylinder models please check GFW50491-2-14SC£1,959.99 inc VAT
It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 50-100mmThis is a custom made “Deep” version coilover kit made to order. £1,959.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 B4 Lim 2WD: 60-120mm
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R Coilovers£1,899.99 inc VATAudi H&R DEEP Coilovers – Audi 80 B4 2WD 09/91>94 ( for 4wd models please check GFW50491-2-12SC ) This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected] Lowering : 60mm – 120mm.£1,899.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Coupe Urquattro 4WD ( Type 85 ) : mm lowering to required level ( VA + HA strut housings required )
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers - AUDI QUATTRO (85) 2.1 Turbo This is a custom made "Deep" version coilover kit made to order. we require the original front and rear strut housings from the vehicle, These are shipped to H&R's factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£1,899.99 inc VAT£1,899.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 89Q S2 4WD 60-120mm:
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversH&R Deep Coilover Kit for Audi 80/90 Type 89Q S2 4WD 10/86>94 Lowering Range 60-120mm This is a custom made “Deep” version coilover kit made to order. It is important to check the size of the bolts which secure the dampers as these are either M12 or M14. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£2,349.99 inc VAT£2,349.99 inc VAT -
H&R Deep Coilover Kit for Audi 80 Type 81 ( B2 ) 2WD: mm lowering to required level
Suspension, H&R Coilover Suspension, Shop by Car, Audi, 80, H&R CoiloversAudi H&R DEEP Coilovers – AUDI 80 Type 81 2WD models only£1,999.99 inc VATThis is a custom made “Deep” version coilover kit made to order. We require the original front and rear strut housings from the vehicle, These are shipped to H&R’s factory in lennestadt for refurbishment where the new coilover system will be built into the reconditioned housings. Additional costs for shipping of the struts vary depending on your location. Please contact us for your requirements of the lowering range and vehicle type at [email protected]£1,999.99 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: with adjustable damping + adjustable camber top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,728.49 inc VAT£2,728.49 inc VAT -
H&R Race Coilover Kit for Audi TT 8J 60-120mm: Inc. adjustable damping for oe top mounts
Suspension, H&R Coilover Suspension, Shop by Car, Audi, TT / TTS/ TTRS, H&R Coilovers£2,207.99 inc VAT£2,207.99 inc VAT -
H&R Deep Coilover Kit for Audi TT 8N + A3 8L 50-110mm 2WD
TT / TTS/ TTRS, H&R Coilovers, A3 / S3 / RS3 H&R Deep Coilover Suspension£1,516.49 inc VAT£1,516.49 inc VAT -
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V
A3 / S3 / RS3 H&R Deep Coilover Suspension£1,449.99 – £2,939.99 inc VATH&R Deep Coilover Kit for : H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8V 08/12> For A3 / S3 electronic damping models use delete kit p/n 93007-1 for RS3 use p/n 93008-1 These versions offer more lowering than the “normal” monotube version and in some variations include camber adjustable top mounts. H&R are an OE and Motorsport suspension specialist so as expected the ride quality of all Deep version reflects the expert technical knowledge and in house “100% german made ” ethic. This is reflected in the 2 year warranty proving the quality in the product and on the road.If you are unsure which coilover best suits your needs please contact us [email protected]Note: The picture may differ from the delivered productThe Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,449.99 – £2,939.99 inc VAT -
H&R Deep Coilover Kit for Audi A3 / S3 / RS3 8P
A3 / S3 / RS3 H&R Deep Coilover SuspensionThis version of deep coilover uses the original top mounts and original drop links from your car. These are not included.£1,290.00 – £2,925.00 inc VAT£1,290.00 – £2,925.00 inc VAT -
H&R Deep Coilover Kit for Audi S1 8X Quattro
Suspension, H&R Coilover Suspension, Shop by Car, Audi, H&R CoiloversH&R Deep Coilover Kit for Audi S1 8X Quattro ( 170 KW ) 2014> for vehicles without electronic suspension control Lowered front axle from [mm]: 55 • Lowering front axle up to [mm]: 70 Lowered rear axle from [mm]: 40 • Lowered rear axle up to [mm]: 85 This kit is not supplied with top mounts , the original top mounts must be used or replaced if necessary. Fixed damping monotube coilovers offered with Bilstein inserts H&R Linear Springs for ultimate comfort and ride quality. Note: The picture may differ from the delivered product£1,429.99 inc VATThis version offers more lowering range than the normal H&R version. The Product is a version that can achieve lowering beyond the H&R standard lowering adjustment range. Due to vehicle-specific tolerances, additional work & modifications may be necessary on the vehicle. Any of those arising costs incurred in this regard these will not be borne by StillStatic Limited. After installation of coilover suspension, the clearance of drive shafts and the wheel/tyre combination to any kind of safety relevant parts, must be checked in all driving and max. load conditions. If necessary, the vehicle ride height must be adjusted higher. In any case, however, the legally specified minimum ride heights on the vehicle must be observed (direction indicators, light beam angle etc calibrated). StillStatic Limited accepts no liability for any damage that may occur as a result of non-compliance with the above points.£1,429.99 inc VAT -
Muecke Audi A3 S3 8V Saloon wider wings 3cm ( inc facelift )
Shop by Car, Audi, A3 / S3 / RS3, Muecke-Carbon & Bodywork Parts ( Wider Wings )When lowering a car, prime concern is clearance for the steering wheels. These quality Muecke wide wings are available for a variety of vehicles - in some cases in a variety of widths too. Stated widths are per side All of these wings are available in carbon fibre too, for an extra cost. Please contact us if this something you would like to look into, and would like a quote.£449.00 inc VAT- 1 set fiberglass front wing R+L for Audi A3 8v saloon widened 3 cm per side
- also fits facelift (8V2)
- unpainted, surface gelcoat gray
- Material report is included, acceptance according to §21 StVZO (individual acceptance)
- for saloon models only
£449.00 inc VAT -
Sold out
MQB Chassis Rear Brake Adapters
Shop by Product Type, Suspension, Shop by Car, Audi, Volkswagen, A3 / S3 / RS3, TT / TTS/ TTRS, Golf, Caddy, Scirocco / Corrado / Eos, Golf Mk4 / Mk5 / Mk6, Golf Mk7 / Mk7.5 / Mk8, Brake AdaptionBrake caliper relocation adapters that allow fitment of an Vented S3/Golf R caliper to 356mm RS7 vented rear disc. A great upgrade when you already have a front 8 pot or 6 pot front wavey conversion and want the big rear disc look without the expense of a twin rear caliper set up.£220.00 – £870.00 inc VAT£220.00 – £870.00 inc VAT
